Slashdot Mirror

Kris_J writes "Seattle PI appear to have been the first to pickup the story that a former member of Highlift ("Space Elevator") Systems has split off to form Liftport. The new company has the impressive aim of a space lift by July 1st, 2018. Competition is supposed to be good, right? If you want to know more they've got a messageboard where you can ask questions."

James Yonan writes "For years, the space elevator concept has been a staple of science fiction fare, popularized by Arthur C. Clark in The Fountains of Paradise, a convenient and plausibly feasible technology for building a vertical railroad of sorts, tens of thousands of kilometers tall, linking earth with geosynchronous orbit. Unsatisfied with the unquestioning consignment of the space elevator concept to science fiction status, authors Bradley C. Edwards and Eric A. Westling set out to understand why it could or couldn't be done. The result is a compelling new book, backed up by voluminous research, which concludes that space elevators are near-term-feasible. Edwards and Westling have not only convinced roomfuls of skeptics of the basic concept, but have also won serious funding from NASA for continuing their work. This book, The Space Elevator, is one of the fruits of their ongoing research." This is a long review (continued below), but the subject demands it. The Space Elevator -- A revolutionary Earth-to-space transportation system. author Bradley C. Edwards and Eric A. Westling pages 280 publisher Spageo Inc. rating 9 out of 10 reviewer James Yonan ISBN 0972604502 summary A compelling argument, backed up with a great deal of quantitative analysis on both scientific and economic grounds, that a space elevator is near-term-feasible.

As a child in the late 60s and early 70s, some of my earliest memories are TV images of the moon shots, the sense of excitement and adventure, and confident assertions by adults that this was only the beginning, that progress was indeed unstoppable, and that it was a near certainty that by the time I was old enough to ask a girl out on a date, the question "would you like a ride in my spaceship" would be greeted not with derision, but with awe. Of course the sad reality is that none of this has come to pass. Space has remained dangerous, expensive, and inaccessible to all except the rare test pilot, scientist, or those for whom capitalism has been unusually kind. Luckily, there are some promising new ideas in space transportation that could represent the breakthrough we have been waiting for in the years since walking on the moon became passé.

In their new book The Space Elevator, Bradley C. Edwards and Eric A. Westling present a compelling argument, backed up with a great deal of quantitative analysis on both scientific and economic grounds, that a space elevator is near-term-feasible. The authors argue that carbon nanotube fibers are both strong and light enough that a 100,000 km elevator, constructed of a 2m wide carbon nanotube "ribbon," could be constructed in 10 years for a cost of US $6 billion, and be capable of lifting a 13-ton payload to geosynchronous orbit once every few days. If feasible, it would present a stunning breakthrough in space accessibility, and likely usher in a new age of space development and exploration.

Edwards writes in the forward:

One day, a few years ago, I read a statement that the space elevator couldn't be done, and I set out to find out why. From there, things got very interesting and resulted in a research proposal being submitted to NASA. The proposal was funded and resulted in, first a six-month study and then a two year study. The core of this manuscript started out as the technical report from the six month investigation I conducted for NASA under the NASA Institute for Advanced Concepts (NIAC) program.

Edwards and Westling begin the book with some history. Until recently, it was thought that alternatives to chemical rockets as a means to reaching LEO (low Earth orbit) were, at least for the foreseeable future, the stuff of science fiction. The idea of a space elevator, foreseen as early as 1903 by the brilliant Russian science speculator Konstantin Tsiolkovsky, foresaw a tower to geosynchronous orbit and beyond.

He was the first to identify the concept that the part of the tower beyond geosynchronous orbit would have an outward "force" due to Earth's rotation that would support the portion of the tower below geosynchronous altitude.

Essentially a space elevator is a geosynchronous satellite with an unusually high aspect ratio. So high, in fact, that even though the satellite is in orbit over a fixed point on the Earth's surface, the lower portion of the satellite actually touches the surface of the Earth. The key, of course, to making this concept workable is to find a material that has the tensile strength to withstand the extreme forces that such a tower or cable would be subjected to. Though a space elevator would need to reach 35,785 km to geosynchronous orbit, since gravity drops off as the square of our distance from Earth, we can collapse the 35,785 km down to its equivalent height as if it were all in 1g, giving 4940 km. This magic number represents the self-support height that a space elevator cable would need to exceed. The self-support height is the maximum length of material, formed into a cable, that can support its own weight in a 1g gravity field before breaking, and can be calculated by dividing tensile strength by density.

It turns out that a steel cable has a self-support length of 54 km, graphite whiskers (fibers) 1050 km, and carbon nanotubes 10,204 km. This last figure is an important result that shows that carbon nanotubes are significantly stronger than would be needed to build a space elevator. The difference between the 4940 km minimum self-support length and the carbon nanotube self-support length of 10,204 km all translates into significant payloads that could be lifted into space using this technology.

So if the space elevator is feasible right now for only US$6 billion (less than half of NASA's annual budget), why aren't we building one ASAP and preparing to retire the shuttles? The answer is that carbon nanotube technology is so new (invented in 1991) that we haven't yet created the infrastructure for mass production. In fact, the authors admit that we haven't even created a nanotube in the lab that demonstrates the requisite strength. While carbon nanotubes have a theoretical tensile strength of 300 GPa (billion newtons per square meter), strengths of only 11.2 to 64.3 GPa have been experimentally measured thus far. Edwards and Westling have heavily based their thesis on nanotubes reaching a tensile strength of 130 GPa in mass-produced volume, so they are to some extent reaching for the future here. Clearly they are counting on a kind of Moore's law to kick in, where the efficiency to cost curve of nanotube production improves exponentially as breakthroughs are made, then asymptotically slows as the theoretical upper bound is approached.

Now assuming that we can economically mass produce carbon nanotube ribbon at a strength of 130 GPa, what's next? Here Edwards and Westling present a well-researched plan for turning the raw material of the carbon nanotube into a functioning space elevator within 10 years. An initial kind of bootstrap cable would be lifted into LEO on board several trips of the space shuttle. This cable would be constructed of carbon nanotubes arranged in parallel with a reinforcing cross-connect adhesive, so that if a nanotube was severed, the remaining tubes would take up the load. The cross sectional dimensions of the cable would be highly asymmetrical, 1 micron in thickness, 13.5 to 35.5 centimeters in width, hence the cable is referred to as a "ribbon". After some assembly in LEO, the initial ribbon and deployment mechanism would be integrated into a spacecraft and sent to geosynchronous orbit, where it would deploy by basically unwinding the spool of ribbon towards Earth, while the spacecraft-spool assembly itself is boosted higher to maintain the total system in geosynchronous orbit. Once a few km of ribbon is unspooled, gravity gradient forces will kick in, ensuring a stable vertical orientation as deployment proceeds. Eventually the end of the ribbon would reach Earth where it would be anchored to a mobile sea-platform, located near the equator, which would have the capability to move the lower end of the cable to dodge known space-junk and electrical storms.

This prototype space elevator will be relatively weak and vulnerable to damage from meteoroids and uncharted space junk, so it will be essential to quickly strengthen the ribbon by widening it. Edwards and Westling's plan calls for "climbers" (electric-powered vehicles that climb the ribbon using a mechanical traction drive) to immediately ascend the ribbon, splicing additional carbon nanotube material onto the existing ribbon, then permanently parking at the far end of the ribbon to add to the elevator's counterweight mass. After 230 iterations of this process, the ribbon will be complete, 2m wide and capable of lifting 20 tons of climber + payload.

Getting a 100,000 km space elevator into position and insuring its survival is a daunting engineering challenge, and much of the book is dedicated to answering what-if scenarios and attempting to prove to the skeptical mind that such an ambitious undertaking is feasible. To this end, each space elevator subsystem is analyzed at length and competing solutions are evaluated for cost and efficiency.

For example three different methods for supplying electrical power to the climbers are evaluated:

• run power up the cable,
• beam power via microwave, and
• beam power via laser.

Answer: use a laser.

An optimal shape (i.e. taper profile) for the ribbon is proposed, so that the part of the ribbon in the atmosphere is narrow to minimize wind-loading forces and the section between 500km and 1700km is widened and slightly curved to maximize survivability from meteoroid or space junk impacts. The destructive effects of wind, lightning, atomic oxygen, debris impacts, radiation damage, and ribbon oscillations are considered and solutions are presented. The conclusion: none of these adverse effects are show-stoppers.

Some basic FAQs are presented and answered, such as where does the energy come from to accelerate a climbing payload on the ribbon to orbital velocity. Answer: from the rotational inertia of the planet. If we shipped a whole continent into space, our days would get a bit longer.

After a comprehensive technical and engineering analysis of the space elevator concept, the authors move on to the economics of the concept and present a sort of skeletal business plan for "Space Elevator, Inc." They present many interesting uses for the space elevator including energy applications that could significantly improve the environment and reduce the combustion of fossil fuels. If the space elevator succeeded in reducing launch costs below $100/kg, large orbiting photovoltaic arrays might be built in space that would collect power and beam it to Earth via microwaves. These ideas are far from new (such an apparatus was patented in the early 1970s), but the reduced launch costs of the space elevator make them far more feasible.

The authors take a detour in explaining some promising results on the nuclear fusion front. Progress on the reduced-radiation IEF concept (Inertial Electrostatic Fusion) for fusion reactors would be accelerated by ³HE mining on the moon, which the space elevator would make feasible.

The rationale for building the ribbon up to 100,000 km is examined. The major advantage of such a tall ribbon is that the centripetal acceleration of the ribbon tip is substantial enough that payloads could be flung to Venus, Mars, or the asteroid belt with little additional energy expenditure. This, the authors argue, would bring down the cost of robotic planetary probes to the point where individual universities could afford their own space programs.

And finally, a working space elevator can be used to manufacture new space elevators at a much lower cost than the initial implementation. The authors suggest that the first significant commercial application of the space elevator might simply be in making additional space elevators and selling them to commercial clients. In this manner, elevators with payload capacities up to 200 tons could be deployed using wider ribbons, making possible a large-scale human presence at geosynchronous orbit and bringing the kind of commercial activities that would go along with that, such as tourism.

The book ends with a flight of fancy of sorts into a future where space elevators have become commonplace. Space elevators around Mars create an efficient Earth-Mars transportation network. Elevators on the moons of Jupiter throw spacecraft down into Jupiter's turbulent upper atmosphere to scoop up ³HE and ship it back to Earth in decade-long space convoys where it will power the latest and greatest IEF fusion power-plants.

While The Space Elevator goes a long way towards convincing skeptics of the feasibility of the general idea, the big question marks that remain in my mind are:

• Will carbon nanotubes really reach the 130 GPa level in cost-effective mass production that will be required for elevator construction?
• Much of the elevator deployment plans depend on the flawless execution of robotic mechanisms controlled remotely from Earth, including the trip from LEO to geostationary orbit, the deployment down to Earth, and the subsequent strengthening of the ribbon by robotic climbers that splice additional nanotube material onto the existing ribbon. As we learned with the Hubble Space Telescope, it is essential to have astronaut access for unexpected but critical repair missions. But much of the space elevator deployment will take place above LEO, out of access of human shuttle missions. What do we do if there is a glitch during deployment that requires an astronaut repair? We will need to seriously address such contingencies, lest we get saddled with a stuck elevator that could become the mother of all space junk.
• Have there been any successful tether missions to date in space? While the answer appears to be yes, I would have liked to learn more about them.

Doubts aside, this is a compelling work that will likely become both a manifesto and bible for the space elevator movement, presenting a convincing argument that the space elevator is our best chance yet to bring Moore's law economies to space. It is an engaging read and I highly recommend it.

Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

Kris_J writes "Highlift Systems may have found a second location for the anchor of their space elevator -- Perth, Western Australia. Apparently we have the calm waters and international airport that it needs, amongst other things. Slashdot has covered this company's efforts before: Oct 9, 2002 and, earlier, August 13, 2002, but it's worth discussing again since '[recent funding] has been given momentum by the Columbia shuttle disaster.'"

Crocuta writes "The current issue of Science News features a cover story that discusses the current developments in space elevator technology. NASA has been working on such devices for many years, but private companies such as Highlift Systems are now jumping on the space elevator bandwagon, no doubt seeing the huge potential profit in a low cost per pound delivery system. PhysicsWeb has a somewhat older, but much more technical article on the formation and structure of the carbon nanotubes that form the basis of the proposed tether cables. With a development like this, we could shoot entire boy bands into space and make the world a better place."

jmiyaku writes "The National Post is reporting that NASA has given a Seattle company a $570,000 grant to continue its investigation into constructing a space elevator. Coupled with some production-grade technology from a Japanese car company (carbon nanotube composites), this elevator could be a reality within 15 years..." The Highlift website has some more information.