Slashdot Mirror

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

rednuhter writes "LPIC 1 Exam Cram 2 is the authoritative tree-based text to aid and abet interested parties accomplishing a LPI LPIC level 1 certification, Which (roughly translated) is the first (not quite open source) Linux exam for junior (intermediate) sysadmins; more information is available at Linux Professional Institute. It is (currently) the only (up to date) printed guide for the Linux Professional Institute Certification (LPIC) Level 1 exam." Read on for the rest of rednuhter's review. LPIC 1 Exam Cram 2 author Ross Brunson pages 590 publisher QUE rating 8 reviewer rednuhter ISBN 0789731274 summary Exam cram for Linux LPIC level 1 The LPI is a non-profit organization bringing high-quality Linux certification to the masses, including multilingual exams across continents. LPIC Level 1 is designed to certify a junior sysadmin in Linux and is composed of two exams. This first level (101) has an optional (minor) 'branch' of either RPM or DEB package management, with RPM being used on predominately Red Hat-based systems and DEB being the preferred method for Debian based systems. The second level (102) is much more 'on the job' administration duties (see LPIC objectives).

I purchased the book last year after deciding I had no reason to try and keep my windows 95 MCP up to date and wishing to (formally) extend my Linux knowledge. I hit a wrong turn after spending quality time with Que's "General Linux 1" [ISBN]0-78972292-5] to find (as I went to book the exam) the format and topics had changed a fair amount in four years (LPI is constantly evolving...).

It was fine book with some good Lab sections, however it was not preparing me for the onslaught that is the seriously tough LPIC Level 1 exam. After a quick rant in the LPI mailing lists, a friendly poster [ross@brunson.org] noted that a book did exist (recently printed) that accumulated one of the premier LPI Linux trainers knowledge and experience, and by no coincidence he was the author.

My previous guide had been only 340 pages long so I was concerned to find this was closer to 600! Luckily the author wastes nothing, with a considerably helpful introduction, followed by details of the LPIC 101 (both flavors) and the 102 exam culminating in the full LPIC Level 1.

The first half of the book is dedicated to the 101 exam, which is the first part of the LPIC level 1 certifications. This included a lot of trouble-shooting steps for basic booting of Linux with hardware configuration and included vi usage (key strokes, buffers, regular expressions), XFree86 (config and understanding) to text processing with tee, tac, sed etc. The detail involved also dipped into modems, CHAP scripts, hardware identification, jobs, processes, chmod, grep, exit statuses and much much more. This also where the RPM/DEB specifics some in; although I have used Debian for many years I opted to take the RPM exam simply because I believe RPM is more widely commercially used, not that I think it is a better packaging system. These skills are an excellent grounding for basic Linux use and understanding, giving rounded knowledge of all the key areas a Linux user should be aware of.

Each chapter has an example exam and the author often makes use of these to introduce new ideas and concepts to encourage the user to research further. These answers are accompanied by explanations of not only why the right answers were correct, but why the wrong answers were incorrect.

The second half of the book (after a quick 66-question 101 test exam) is much more geared to a junior sysadmin and I found it quite hard going. Topics range from runlevels, daemons, users/groups, kernel compilation, modules, shells, scripting, networking, services, printing and security. As you may imagine, some of these topics are quite extensive and I personally found this half much more difficult to absorb. Note there is only one 102 LPIC exam, there is no RPM/DEB choice. This list does not really do the subject matter justice, as it goes into such things as custom subnet masks, network time utilities, Apache, sendmail, crontabs and even more.

This was followed by a set of 77 test 102 questions with both a quick answer key and a complete set of explanations.

The book includes a pull-out Cram Sheet which can help you memorize things such as the IRQ/IO address for serial ports, the different man page sections and common printer commands.

The author also notes how best to prepare for taking and even resitting the exam (the LPI has a concise retake policy).

The actual exam questions and areas are weighted, and you should ensure you review for the heavily weighted sections at least as much if not more that the lower-weighted ones.

The key 'trick' to passing the exams is to have tried the commands yourself and seen the results, I cannot emphasize this enough! The LPI 'seems' to favor (currently) 2.4.x kernels in the FHS File Hierarchy Standard RPM and DEB varieties, I did most of my investigation either with Knoppix via qemu(in windows) or Debian sid running the 2.6.x kernel. (However, most topics are vendor/distribution neutral and kernel and other obvious differences are noted.)

Although this book contains a lot of examples, it is not for beginners, unless you want to base your Linux learning on it. Sysadmins will find it too simple in places, but should not be complacent as they will find some knowledge nuggets buried that will ultimately help them pass the exams.

The book is easy to read, with some real-world examples that are ideal to reinforce the information presented. (It has been noted that practice lab sections could have been included; see author reply here)

Unfortunately, there are a fair number of misprints, technical inaccuracies and spelling mistakes current errata but a quick session with man will set you straight and very few directly spoil the otherwise accuracy of the book (the author notes that a second reprint is addressing these).

The CD comes with the obligatory PDF version of the book and a test program, this has caused some problems for some Linux users although fixes are now available. The test program tries to recreate the testing environment, with optional timer and instant result features. I personally found it very useful to identify areas I was weak in and required further investigation.

The book does a good job not to stray off into GPL licensing or any other non (LPIC Level 1) related topic, leaving further investigation up to the reader offering links where relevant.

It took me about 15-20 hours to revise for the 101 RPM exam and I passed with (apx) 96% where as the revision for the 102 exam was over a much longer period (and a more turbulent part of my life) taking about 40-50 hours which gave me a (apx) pass of 86% (remember the questions are weighted, my percentage scores are simply against the number of questions I got right and makes me feel good).

Preparing you for the LPI LPIC level 1 exams (part 1(RPM/DEB) and part 2)

Not only did I find the book easy to get on with and an indispensable asset for passing the exam but it has had pride of place on my desktop and makes an excellent reference tome.

The LPI website does now list Ross's book and there are various other resources available for a quick google, or just wait for the Slashdot crowd to fill up the comments below.

You can purchase LPIC 1 Exam Cram 2 from bn.com. Slashdot welcomes readers' book reviews -- to see your own review here, read the book review guidelines, then visit the submission page.

dirvish asks: "I am trying to break into the Linux Server Administration field so I have been doing quite a bit of studying lately. I figured while I am studying the subject I might as well work towards a related certification. I am leaning towards the Linux Professional Institute Certification. Other certifications I am considering are CompTIAs Linux+ and Red Hats RHCE. So which Linux certification is the best? I would say Red Hat is the most reputable of these three but I am concerned that their certification might be too Red-Hat-centric, and I don't want to be locked into one distro. Which one is the easiest/cheapest to obtain? Which is the mostly highly regarded in the industry? Are there others that I missed?"

sp3298622 writes "The CertMag Salary Survey is now available, seems like the Cisco CCIE's get the top salaries and the Apple Helpdesk portable technicians are left with peanuts. According to the survey, it's financially more lucrative to study Linux fundamentals and be LPIC Certified rather than MCSE."

Frequent book reviewer and genuine Englishman Duncan Lawie sent us this first-person account of UK Linux Expo 2000. Proof (not that it was needed) that not only is Linux continuing to grow in the UK as elsewhere, but that the disconnect between suits and geeks remains as evident as ever. Read below for good news and medium news -- thankfully, that seems to be as bad as it gets for this transmission.

"Linux Expo 2000, running June 1 and 2 in London, is widely seen in the British IT industry as an indicator that Linux has come of age. It is now in its second year, with 35% more exhibitors than last year and expecting a 70% increase in visitor numbers. Despite such figures, it is not a huge show, with around 80 exhibitors. However, this Expo seems to be primarily an opportunity for Business to prove how net-centric it has become and to show how well it has embraced Linux whilst the Geek Evangelists struggle to remind the besuited visitor of the Open Source philosophy.

It was the usual uneasy fit. The Linux Professional Institute couldn't help referring to the sponsorship they had received from Mandrake who had the neighbouring stall. The LPI was part of a .org ghetto on the lower floor along with Debian -- selling a six CD set including source code for seven pounds -- and such other luminaries as the Linux User Groups. All around them, the commercial face of Linux in Europe was touting its wares.

The deals on show covered the spectrum from server co-location to the servers themselves and from Linux Utilities for a fiver to commercial packages which have been rapidly ported to the lively new Linux markets. A good selection of Linux distributors were available on-site. Red Hat had the largest stand while SuSe seemed to be getting the most visitors. My quote of the day had to be the SuSE guy at the prize draw: "This is genuine -- a guy with a German accent giving away software." SuSE's popularity may also have had something to do with the advertised appearance of User Friendly and the opportunity to get a Dust Puppy to take home, but some of the UFie comments were a little scary. Their headline quote was taken from a slashdot post and much of what they had to say seemed to suggest that userfriendly.org is in the process of "leveraging" their undeniably successful core product.

This seemed to be a theme of a number of other exhibitors, though Red Hat actively stated that there is only one Linux -- and I'm sure they were talking about the kernel rather than attempting to dismiss their competitors' market share. This is despite the appearance of at least two distributions I hadn't heard of before and the presence of a stall which had the primary purpose of selling downloads of other people's distros cheaper.

The Mandrake stand seemed quite popular while SGI definitely scored points with the best Quake setup at the show. SGI also had the most original attraction of the event -- an Ice Penguin. The ice carving stood on a plinth and had a hole drilled through from one shoulder and coming out the bottom of the belly. At appropriate moments, an SGI staffer would pour a stream of vodka in the shoulder which cooled and splashed into the lucky recipient's plastic cup. The choice of Smirnoff alleviated the potential problems of insufficient cooling which may have occurred if cheaper source product had been in use.

Towards the end of the day, Mailbox Internet -- who started off as the UK's primary Apple-friendly ISP -- started handing out beer to anyone who managed to maintain a serious conversation with their sales staff. This approach was far more rewarding than that taken by Pervasive. I asked their sales guy to compare his database product with mySQL and PostrgreSQL and his basic response was that you get what you pay for. Perhaps he would have tried a different tack if I hadn't been wearing a suit and a tie. This was the essential problem with the event -- over 80% of the exhibitors were commercial outfits but less than 20% of the visitors were Suits. The Geeks were there in force in the hope of finding Illiad and talking amongst themselves and I suspect that Lonix , the London Linux User Group, with its professed aim "to drink beer and have fun" was more successful at recruiting than many of the commercial exhibitors. Meanwhile, many of the exhibitors made me feel naked without a business card to hand over and one company was advertising MCSE training.

For all that, it was an interesting event and a reminder that there are ways of obtaining information without visiting google. In fact, this was a pretty good example of the Bazaar that ESR and cluetrain tell us about. It was an environment where small operations and large have an almost equal voice and where passion beats gimmicks -- which is where Linux began, is it not?

My score for the afternoon: 1 beer, 1 vodka, 1 T-shirt, 3 CDs and about a thousand brochures."

Daniel James also sent this report from the show floor, with some quick product descriptions and other Expo news:

"This mailing is coming to you from the LinuxUser stand at the Linux Expo in London. The exhibition is more than twice as big as last autumn's show, with stands on two floors and the European Linux Conference hosted by SUSE on the floor above. Here's the pick of the news from the show.

____________________________________________

Stronghold SSL web server
Stronghold 3 has been released by C2Net Software. It's a 128-bit SSL server based on Apache. It costs $995, but you can download an evaluation version from http://www.c2.net

_____________________________________________

New Alpha motherboard
The UP1100 has been revealed at the Expo - partnered with a 21264 Alpha processor, it's aimed at Beowulf clusters, web servers and development and rendering boxes. API have also announced a partnership with QSW which will develop Linux supercomputers. Check out http://www.alpha-processor.com and http://www.quadrics.com

______________________________________________

Mailbox Internet partners with SUSE
Mailbox claim to be the first 100% Linux ISP, and they've formed a partnership with SUSE to co-promote Linux on the desktop. http://www.mailbox.net.uk

_______________________________________________

New Silicon Graphics Linux boxes
SGI have been showing off their 230L Visual Workstation, preinstalled with RedHat 6.1 and OpenGL 1.2 graphics drivers. They've also announced that IBM's Web Sphere will be available on the new 1450 Linux server, to run alongside DB2. http://www.sgi.co.uk

________________________________________________

Best freebie at the show?
TurboLinux tatoos - we've all got one. They did promise that they wear off eventually ... More next week. Don't forget to send in your Linux-related snippets to me at daniel@linuxuser.co.uk"

For another voice covering UK Linux Expo, try mart's roundup of the event, linked from LinuxUK.

Matthew Miller recently went through the RH300 training course, as well as the RHCE Certification Exam. He was kind enough to write an overview and give us his opinions on both of them, as well as his opinions on the relevance and quality of the training and the exam. Certification has been discussed extensively with regards to Linux, and here's a big scoop of food for thought.

The following was written by Slashdot Reader Matthew Miller

I'm fortunate enough to work at a place that realizes the importance of keeping employees educated and up-to-date. Since my largest current project is Linux-related, and based on Red Hat's distribution in specific, we thought it'd be worthwhile to send me to Red Hat for their RH300 course. I'm pretty familiar with Linux, but I'm a long way from knowing everything, and it's always interesting to learn what the vendor thinks are the most important parts of their product. We chose RH300 because it's the highest-level systems administration class currently offered. It's also the one linked to the RHCE exam, which was an added bonus, but learning was my main goal, not getting the certification. This is my report on the experience -- hopefully, it will help you decide if this is a good choice for you, either as a sysadmin or as an employer.

The Training Center

This course is not only available directly from Red Hat, but also from various partner organizations, including Global Knowledge, which has a training center here in Boston. However, we decided that if we were going to go to the expense of sending me, I might as well go directly to Red Hat, to increase the chances of getting a good instructor, and to insure adequate access to resources. We've had experiences in the past with third-party instructors who didn't know much beyond what was written in the materials. Of course, I don't know that this would be the case with Global Knowledge's version of RH300 -- perhaps someone else can comment on any experience they've had there.

So, it was off to the Red Hat headquarters in Durham, NC. Incidentally, I stayed in the Residence Inn there -- it was on Red Hat's site as being nearby. They didn't mention that it was on the other side of a major highway, with no provision for pedestrians to get across. Moral: stay at one of the closer hotels, or else get a car. Anyway, the RH building is very nice -- much bigger than I expected. (I suppose the IPO cash is going to good use.) Of course, as students, we weren't shown much of it -- no tour, and we weren't introduced to any of the celebrity employees. (Fair enough -- with several classes coming through every week, they'd never get anything done.) The people I did meet seemed pretty cool, and in general I got the impression that it's a fun place to work.

The classroom was about as I expected -- projection screen up front, rows of decent-enough small-brand Celeron-based systems (one per student). The machines were on a private network -- reasonable for the course, but unfortunately there was no provision for Internet access, which at the least would have been nice to have when I finished labs early.

We did have access to a breakroom with free soft drinks / juice and various snack items. This is also where the lunches were served -- to my surprise, these were quite good, and there were even decent non-meat choices.

The Teacher

The instructor was very knowledgeable -- not necessarily a complete guru, but he knew his stuff, including the "why" behind the course material. He was able to present the material in a good way, and was good at answering questions. I think the decision to go to Red Hat directly was wise; unlike a third-party consultant, he had some idea of what was going on inside of Red Hat and of their potential future plans. For example, during the section on the printing subsystem, he mentioned that they're considering a replacement for LPR in future releases -- perhaps LPRng or even CUPS. It's unlikely that someone from a different company would have had access to that kind of information.

Other Students

The other students in the course had a wide range of skills and backgrounds. I think that everyone probably met the listed better than pico. However, I could tell that some people were struggling. The instructor mentioned that the pass rate for the exam is about 65%, and I wouldn't be surprised if our class came out at that level or worse. It's not that anyone was stupid -- just that some people were out of their depth. On the other end of the spectrum, there were some people who were over-qualified: a few highly experienced sysadmins, and some folks from IBM taking the class because they are soon going to teach it.

The Course

The course was generally similar to the outline found on Red Hat's site, although I think the online information is a bit out of date. (Notice that the Web page makes reference to ipfwadm instead of ipchains or netfilter.) The eight units had slightly different names, and covered slightly different information. In the most drastic example, Unit 8, listed on the Web site as "Systems Administration and Security II", has turned into "Routers, Firewalls, Clusters and Troubleshooting". Some of the information listed in the online Unit 8 was moved into Unit 7, and some of it (cops, for instance) wasn't talked about at all. Hopefully, the online info will be updated soon.

Overall, the class went into less depth than I was hoping. Some of this was due to limitations of the lab setup -- it's a bit difficult to experiment with RAID in any meaningful way when you've only got one IDE hard drive, and obviously impossible to set up a cluster on one machine (short of running VMware). Other things where just plain introductory -- the section on the kernel, for example, focused on the steps required to build and install a new kernel, rather than being an in-depth discussion of tunable parameters. The part about Apache was similar; I was hoping to hear "You've all configured Apache before; here's things you should be aware of when you need it to do such-and-such", but the most advanced we got was setting up a virtual host. Building RPMs from source was mentioned briefly, but there was no information given on important and largely undocumented topics like --buildpolicy.

That's not to say I didn't learn anything -- the section on LVS / Piranha was enlightening even without hands-on experience, and I appreciated the part about quotas, which isn't something I've worked with much. And, I learned a large number of tiny things which add up to making the experience worthwhile to me. RPM can now do globbing over ftp! Portmap uses tcp_wrappers, but doesn't do reverse name lookups, so be sure to use IP addresses instead of names. RH Linux provides a little script called "service" that lets one avoid the tedium of typing /etc/rc.d/init.d/servicename all the time. And so on....

The "300" designation is a bit misleading. This isn't really what I'd consider an upper-level course -- it's more along the lines of SysAdmin 101. Overall, I think this class is probably worthwhile to someone with a good RH Linux background who hasn't done any systems administration. In fact, I'd even recommend it to people in that situation. On the other hand, if you've been a Linux sysadmin for a while, you'll probably be bored most of the time. It might be valuable to experienced Unix sysadmins who haven't dealt with Linux much (or even Linux admins who haven't used Red Hat Linux), but the course wasn't particularly taught from that angle and there are probably better options.

The Exam

Since I signed a confidentiality agreement, I can't talk about specific details of the test, but I will address the exam in general terms. It's a day-long three part process, with each part being worth 1/3 of the total. To pass, your overall score must be at least 80%, and you can't do worse than 50% on any one part.

One of the sections is a typical multiple-choice test, but the other two are lab based. I was quite impressed with the hands-on tests -- they are certainly what makes the RHCE meaningful. I'm not aware of any other sysadmin certifications that work this way.

For one of the lab tests, students are given a several-page specification, and must install and configure Red Hat Linux and several network services. This wasn't particularly difficult, and shouldn't be for anyone with much experience. For me, the hardest part was resisting the temptation to go beyond the spec -- since I finished the given requirements with plenty of spare time, I considered installing and setting up additional services in a way that would fit in with the listed goals. But, I decided that it'd be better to leave well-enough alone -- there's no concept of extra credit.

The other hands-on test is the cool and exciting one. Students are given preconfigured setups which are broken in some way, and given a task that must be completed. The system's problem doesn't necessarily relate directly to the task, but does interfere with it. The test-taker must find out what's wrong and correct the error. (Reinstalling packages is not allowed.) Being able to list the steps taken and to repeat the fix is important, but ultimately the test is scored on a works / doesn't work basis. One the examiner verifies that the problem is fixed, he or she wipes the system and provides another broken config.

This problem-solving section directly tests skills important to being a sysadmin in the real world; if someone has trouble with these, they're probably not ready for a systems administration job. Of course, just passing this test doesn't guarantee good problem solving skills (let alone all the other needed abilities), but it does seem a genuinely valuable indicator.

I've only two complaints with this part of the test. First, I'd make it a much larger section -- at least 50% -- and I'd increase the number of problems given so that there'd be a better sample size. The various challenges are assigned at random, and some are easier than others, and each tests knowledge of different parts of the system. The way it's done isn't bad, but it wouldn't hurt to have a lot more of it. Second, I'd give each student two computers, and make more of the problems network-related. This has logistical and cost issues (especially in places other than Red Hat's own training centers), but since many of the problems faced in the real world have to do with the way systems interact, I feel it'd be worth it.

The Exam Separated From The Course

You may have noticed that I seem a lot more excited by the exam than by the course itself. I think both are valuable, but they seemed aimed at slightly different levels. The course definitely can serve as a good review for the exam, but if you need the course, you won't do well on the test. If you're tight on cash and the certification seems valuable to you or to your employer, going straight to the exam would be reasonable. (Make sure you take a look at Red Hat's test prep page.) On the other hand, if you need to be quickly brought up to speed on the basic knowledge required of a RH Linux sysadmin, it might make sense to take this course without worrying about the test. Since RH300 is equivalent to RH033 + RH133 + RH253, this could be a much more intensive and time-efficient option.

Red Hat-Specificness

It's probably obvious, but bears mentioning anyway: this is a Red Hat Linux course and certification, not a general Linux one. I found this to be true both explicitly and implicitly. The instructor was good about saying "This is the Red Hat way of doing things -- it's possibly different on other distributions." (I found the increase-the-whole-pie attitude to be common to all of the RH employees I talked to.) There were also quite a few things that were just assumed. If you take the exam without knowing a lot about Red Hat Linux in particular, you're likely to have trouble.

This doesn't make the certification meaningless for organizations running other distributions -- many of the skills and knowledge required for the test (especially the problem solving part) are generally applicable anywhere. In fact, due to the lab-based testing process, I have more respect for this exam than I might for a multiple-choice test covering more distributions. I think this issue is a one-way sort of thing: the RHCE exam requires knowledge of Red Hat Linux, but anyone who can pass it shouldn't have much trouble picking up other flavors.

Stuff

Ok, the Web page promises that they'll give Red Hat promotional items to course participants. Yeah, well, they can do better on this front. Not even a t-shirt! C'mon, everyone gives t-shirts. Vendor shirts are a staple of my wardrobe! All we got was a mousepad, some stickers, and a baseball cap. (No chance of getting a red fedora.) Oh, and of course an official copy of the CD (with the 180 days of support). Many people in the class were surprised to learn that Red Hat doesn't sell anything from their offices -- you can't buy copies of the distro or additional merchandise. They've got a lot of students coming through there, so it seems like this could be a decent (even if relatively small) revenue stream.

A Bit About Study Guides

Before I went, I flipped through RHCE Exam Cram , the sole study guide I found at the local bookstore. Someone in the class actually purchased it and brought it with them, and I got a chance to read more of it then. I wasn't really impressed. The book was especially concerned with what it called "trick questions", and indeed its sample questions were sometimes a bit confusing -- and often poorly worded. After taking the test, I can say that this seems mostly to be a problem with the book, not something encountered on the actual exam, which was mostly straightforward and fair.

There are RHCE study guides, but I wouldn't recommend spending any money on any of them. As the course instructor told us: if you're going to pass, you'll do so even if you don't have a guide. And if you're going to fail, the guide won't be much help.

Conclusion

I think the RH300 course and RHCE certification can be valuable to both employers and individuals. The course provides a nice quick overview of the basics needed to move, for example, from being a systems operator to being an admin. I wouldn't think of it as either a requirement for the test or as something that can make someone not ready suddenly have the skills required for the exam. Since the exam is hands-on and lab based, those abilities can only come from real world experience. Looking at that from the other direction: this is exactly what makes the RHCE worth anything. While it's not a total statement on someone's talent, being able to pass is a strong indicator that they have the basic skills for a systems administration job. If I were making hiring decisions, I wouldn't make the RHCE a requirement, but I would have more confidence in applicants who have it.