Hewlett-Packard Install Network Printer Wizard v 02.00
Table of Contents
1. Overview
2. DHCP
3. DNS
4. IP Address Support
5. Suggest IP Address (Autonet)
6. NetWare Support
a. Supported Versions
b. NDS Multiple Tree Support
c. NetWare 5 Support
d. No Novell Print Path
e. No NDS volumes
f. Support for NDS localities
7. Device Discovery
a. Gateway
b. Multi-homed Machines
c. 0.0.0.0 IP Addresses
d. Class A Subnet Masks
8. Driver Support
a. License Acceptance
b. Have Disk Support
c. HP Driver Updates
9. IPX Port Monitor and Data Corruption 10. Printer Names 11. Printer Share Name 12. Error Messages 13. Known Problems Installing HP Printer Drivers Under Windows 95/98 14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
1. Overview
This Read Me file contains last-minute product information for the Hewlett-Packard
Install Network Printer wizard for Windows 95/ 98 and Windows NT.
2. DHCP
If you try to change just the subnet mask on an HP JetDirect print server that has
been configured via DHCP, you will get an error message while using the Hewlett-Packard
Install Network Printer wizard. Once a JetDirect print server has been manually
configured, it will store the IP address, subnet mask and default gateway statically
instead of trying to obtain them dynamically. Allowing a static change only to the
subnet mask would cause DHCP-configured IP conflicts in the future. For more information
on this subject, see the HP JetDirect documentation.
3. DNS
In a DNS environment, the Hewlett-Packard Install Network Printer wizard will
automatically set up the port with the host name rather than the IP address. If you have
a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer
will never print a page. We consider this environment to be an invalid DNS environment.
To fix the port without changing the DNS environment, view Properties for the printer.
Select the ports tab. Select the port that is in use for that printer. Click Configure
Port. Change the host name to the correct IP address.
4. IP Address Support
Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP
addresses are those addresses with the form of 224.xx.yy.zz
All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP
to be used to configure device on the network.
5. Suggest IP Address (Autonet)
The algorithm for obtaining the IP address for the "Suggest Settings..." button is
derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically
Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP
address is to randomly generate an address in the 169.254.x.x reserved address range,
then determine if it is in use on the network. If it is in use, generate another address
in the range. Repeat until an address is generated that is not in use. The resulting
address is not intended for use on the Internet. Microsoft uses a similar scheme for
determining an IP address on Windows 98 and Windows 2000 when the system is in an environment
that doesn't have a DHCP or bootp server, and the system is configured to dynamically
determine and IP address.
6. NetWare Support
a. Supported Versions
The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell
queue creation, you must be logged into a Novell bindery or NDS server using a Novell
supplied client requester. See www.novell.com for client updates.
b. NDS Multiple Tree Support
The Hewlett-Packard Install Network Printer wizard only provides support for the NDS
tree the user is currently logged into. If a different tree is desired you must quit
the application, change your login to the desired tree and rerun the application.
c. NetWare 5.0 Support
If NetWare 5 is configured for IPX, and an IPX connection is being used on the client,
the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print
queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on
the client, the Hewlett-Packard Install Network Printer wizard can be used to create
an IP print path. If the client on which the application is being run has an IPX
connection to the NetWare 5 server, and the client is logged in, an NDS queue server
print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print
path will be recommended. In order to create NDS queues, an IPX connection with a
login must be present.
d. No Novell Print Path
The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship
with the Novell Client for 95 and NT. The application will look for these DLLs and
the associated entry points within them. If any of the necessary DLLs are missing,
or if they do not have the needed entry points (perhaps an old version), a Novell
print path will not be available although other supported print paths will be. If a
Novell print path is not available when you think one should be, try upgrading your
Novell client software to a newer version.
e. No NDS volumes shown in NetWare 4.11
There is a known problem reading the list of available NDS volumes in NetWare 4.11 with
service pack prior to version 7. This problem has been seen in cases were the user
logs into an NDS context that is at a lower level than the available volumes. The solution
is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2.
f. Support for NDS localities
The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the
NDS context.
7. Device Discovery
a. Gateway
Discovery performance will be very slow if your client PC does not have a gateway
configured. To configure a gateway, choose "Network" in the Control Panel, and then
look at Properties for the TCP/IP protocol. An input should appear for entering a
gateway address. See the online help for a more information on TCP/IP and gateways.
b. Multi-homed Machines
Multi-homed machines are not supported. In a multi-homed machine, it is not possible
to distinguish between multiple devices with the same IP address. A multi-homed
machine is a computer with more than one network connection. It is possible for two
or more devices on different networks to have the same IP address. A multi-homed
machine would see both devices and there would be no guarantee that you are
configuring the correct device. In this case, either disable all but the correct
network card, or configure the HP JetDirect print server from another PC that is on
the correct network and has only one network card. This problem may also occur on
PCs that contains both a network card and a dial-up adapter.
c. 0.0.0.0 IP Addresses
Assuming that an IP address is not assigned, a JetDirect-connected printer will have
an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After
2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to
configure a "0.0.0.0" device through an IP print path will fail. You must wait until
the HP JetDirect device has a non-zero IP address before attempting to configure it.
d. Class A Subnet Masks
If the machine running the Hewlett-Packard Install Network Printer wizard has an IP
subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device
discovery will suffer a significant performance degradation. To improve discovery
performance you must change your subnet mask to a non-Class A subnet mask.
8. Driver Support
a. License Support
Some drivers require the acceptance of a license. When installing a driver, if a
dialog appears that requests acceptance of a license, you must approve the license
before the application will continue. Failure to approve the license will result in
the application hanging.
b. Have Disk Support
To support new printers or drivers, the "Have Disk" button can be utilized during
driver installation. For the "Have Disk" functionality to work, the media must
contain an "inf" file (e.g. filename.inf). Some driver updates available on the
World Wide Web are in the form of self-extracting archives and are not in a format
that "Have Disk" can utilize. In this case, install the driver before running the
Hewlett-Packard Install Network Printer wizard.
c. HP Driver Updates
Hewlett-Packard driver updates can be found on the World Wide Web at:
www.hp.com/go/support
NOTE: This URL is subject to change.
9. IPX Port Monitor and Data Corruption
Some printers may experience data corruption when used with the Hewlett-Packard IPX
Port monitor under Windows NT. These errors may be corrected either by installing an
appropriate hot fix for NT or by installing Service Pack 4 from Microsoft.
10. Printer Names
When naming a printer within the Hewlett-Packard Install Network Printer wizard you
must enter a name in English that conforms to the Microsoft Printer Naming rules
(i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name
is required, assign the printer name in English and finish the install. Then open the
printer folder from the Control Panel and select the desired printer. Select "Rename"
from the File menu and rename the printer with a localized name.
11. Printer Share Name
Spaces are not allowed for naming printer shared name.
12. Error Messages
Error writing to for : The system cannot write to the specified file.
This error message may appear when attempting to print a test page or during regular
use. It usually means the printer is out of paper or unavailable. Check the printer
and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard
Install Network Printer wizard when this occurred, there is no need to rerun the
application. Simply locate the printer in the printer folder and right mouse click on
it. Choose "Properties" and select to print a test page. If you have corrected the
error condition, a test page should now print.
Driver cannot install. Must run printer's setup program.
When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard
Install Network Printer wizard may not be able to install the driver. You will receive an
error message stating that you need to run the printer's setup program. The Hewlett-Packard
Install Network Printer wizard may create the printer in the printer's folder despite this error.
The installed printer will not function properly. After the wizard exits, run the setup
program that comes with the printer. You may have to identify the printer as existing on a
local port such as LPT1. Install the printer using this setup program. Now delete both
printers from the printer folder (the printer created by the HP wizard and the printer created
by the printer's setup program). Run the HP wizard a second time. This time choose existing
drivers. You will see two similar printer strings. One will be from the first HP wizard
install and one from the printer's setup install. Choose one. If the wizard exists
successfully you chose the proper driver. If the installation fails, rerun the wizard and
this time choose the other driver. Finally, check to make sure the printer created is the
default printer. This can be accomplished by right mouse clicking on the printer in the
printer's folder and seeing if "Set As Default" is checked.
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
Some HP printer drivers do not install correctly using the printer.INF file and the
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer.INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
Hewlett-Packard Install Network Printer Wizard v 02.00
Table of Contents
1. Overview
2. DHCP
3. DNS
4. IP Address Support
5. Suggest IP Address (Autonet)
6. NetWare Support
a. Supported Versions
b. NDS Multiple Tree Support
c. NetWare 5 Support
d. No Novell Print Path
e. No NDS volumes
f. Support for NDS localities
7. Device Discovery
a. Gateway
b. Multi-homed Machines
c. 0.0.0.0 IP Addresses
d. Class A Subnet Masks
8. Driver Support
a. License Acceptance
b. Have Disk Support
c. HP Driver Updates
9. IPX Port Monitor and Data Corruption 10. Printer Names 11. Printer Share Name 12. Error Messages 13. Known Problems Installing HP Printer Drivers Under Windows 95/98 14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
1. Overview
This Read Me file contains last-minute product information for the Hewlett-Packard
Install Network Printer wizard for Windows 95/ 98 and Windows NT.
2. DHCP
If you try to change just the subnet mask on an HP JetDirect print server that has
been configured via DHCP, you will get an error message while using the Hewlett-Packard
Install Network Printer wizard. Once a JetDirect print server has been manually
configured, it will store the IP address, subnet mask and default gateway statically
instead of trying to obtain them dynamically. Allowing a static change only to the
subnet mask would cause DHCP-configured IP conflicts in the future. For more information
on this subject, see the HP JetDirect documentation.
3. DNS
In a DNS environment, the Hewlett-Packard Install Network Printer wizard will
automatically set up the port with the host name rather than the IP address. If you have
a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer
will never print a page. We consider this environment to be an invalid DNS environment.
To fix the port without changing the DNS environment, view Properties for the printer.
Select the ports tab. Select the port that is in use for that printer. Click Configure
Port. Change the host name to the correct IP address.
4. IP Address Support
Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP
addresses are those addresses with the form of 224.xx.yy.zz
All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP
to be used to configure device on the network.
5. Suggest IP Address (Autonet)
The algorithm for obtaining the IP address for the "Suggest Settings..." button is
derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically
Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP
address is to randomly generate an address in the 169.254.x.x reserved address range,
then determine if it is in use on the network. If it is in use, generate another address
in the range. Repeat until an address is generated that is not in use. The resulting
address is not intended for use on the Internet. Microsoft uses a similar scheme for
determining an IP address on Windows 98 and Windows 2000 when the system is in an environment
that doesn't have a DHCP or bootp server, and the system is configured to dynamically
determine and IP address.
6. NetWare Support
a. Supported Versions
The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell
queue creation, you must be logged into a Novell bindery or NDS server using a Novell
supplied client requester. See www.novell.com for client updates.
b. NDS Multiple Tree Support
The Hewlett-Packard Install Network Printer wizard only provides support for the NDS
tree the user is currently logged into. If a different tree is desired you must quit
the application, change your login to the desired tree and rerun the application.
c. NetWare 5.0 Support
If NetWare 5 is configured for IPX, and an IPX connection is being used on the client,
the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print
queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on
the client, the Hewlett-Packard Install Network Printer wizard can be used to create
an IP print path. If the client on which the application is being run has an IPX
connection to the NetWare 5 server, and the client is logged in, an NDS queue server
print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print
path will be recommended. In order to create NDS queues, an IPX connection with a
login must be present.
d. No Novell Print Path
The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship
with the Novell Client for 95 and NT. The application will look for these DLLs and
the associated entry points within them. If any of the necessary DLLs are missing,
or if they do not have the needed entry points (perhaps an old version), a Novell
print path will not be available although other supported print paths will be. If a
Novell print path is not available when you think one should be, try upgrading your
Novell client software to a newer version.
e. No NDS volumes shown in NetWare 4.11
There is a known problem reading the list of available NDS volumes in NetWare 4.11 with
service pack prior to version 7. This problem has been seen in cases were the user
logs into an NDS context that is at a lower level than the available volumes. The solution
is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2.
f. Support for NDS localities
The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the
NDS context.
7. Device Discovery
a. Gateway
Discovery performance will be very slow if your client PC does not have a gateway
configured. To configure a gateway, choose "Network" in the Control Panel, and then
look at Properties for the TCP/IP protocol. An input should appear for entering a
gateway address. See the online help for a more information on TCP/IP and gateways.
b. Multi-homed Machines
Multi-homed machines are not supported. In a multi-homed machine, it is not possible
to distinguish between multiple devices with the same IP address. A multi-homed
machine is a computer with more than one network connection. It is possible for two
or more devices on different networks to have the same IP address. A multi-homed
machine would see both devices and there would be no guarantee that you are
configuring the correct device. In this case, either disable all but the correct
network card, or configure the HP JetDirect print server from another PC that is on
the correct network and has only one network card. This problem may also occur on
PCs that contains both a network card and a dial-up adapter.
c. 0.0.0.0 IP Addresses
Assuming that an IP address is not assigned, a JetDirect-connected printer will have
an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After
2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to
configure a "0.0.0.0" device through an IP print path will fail. You must wait until
the HP JetDirect device has a non-zero IP address before attempting to configure it.
d. Class A Subnet Masks
If the machine running the Hewlett-Packard Install Network Printer wizard has an IP
subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device
discovery will suffer a significant performance degradation. To improve discovery
performance you must change your subnet mask to a non-Class A subnet mask.
8. Driver Support
a. License Support
Some drivers require the acceptance of a license. When installing a driver, if a
dialog appears that requests acceptance of a license, you must approve the license
before the application will continue. Failure to approve the license will result in
the application hanging.
b. Have Disk Support
To support new printers or drivers, the "Have Disk" button can be utilized during
driver installation. For the "Have Disk" functionality to work, the media must
contain an "inf" file (e.g. filename.inf). Some driver updates available on the
World Wide Web are in the form of self-extracting archives and are not in a format
that "Have Disk" can utilize. In this case, install the driver before running the
Hewlett-Packard Install Network Printer wizard.
c. HP Driver Updates
Hewlett-Packard driver updates can be found on the World Wide Web at:
www.hp.com/go/support
NOTE: This URL is subject to change.
9. IPX Port Monitor and Data Corruption
Some printers may experience data corruption when used with the Hewlett-Packard IPX
Port monitor under Windows NT. These errors may be corrected either by installing an
appropriate hot fix for NT or by installing Service Pack 4 from Microsoft.
10. Printer Names
When naming a printer within the Hewlett-Packard Install Network Printer wizard you
must enter a name in English that conforms to the Microsoft Printer Naming rules
(i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name
is required, assign the printer name in English and finish the install. Then open the
printer folder from the Control Panel and select the desired printer. Select "Rename"
from the File menu and rename the printer with a localized name.
11. Printer Share Name
Spaces are not allowed for naming printer shared name.
12. Error Messages
Error writing to for : The system cannot write to the specified file.
This error message may appear when attempting to print a test page or during regular
use. It usually means the printer is out of paper or unavailable. Check the printer
and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard
Install Network Printer wizard when this occurred, there is no need to rerun the
application. Simply locate the printer in the printer folder and right mouse click on
it. Choose "Properties" and select to print a test page. If you have corrected the
error condition, a test page should now print.
Driver cannot install. Must run printer's setup program.
When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard
Install Network Printer wizard may not be able to install the driver. You will receive an
error message stating that you need to run the printer's setup program. The Hewlett-Packard
Install Network Printer wizard may create the printer in the printer's folder despite this error.
The installed printer will not function properly. After the wizard exits, run the setup
program that comes with the printer. You may have to identify the printer as existing on a
local port such as LPT1. Install the printer using this setup program. Now delete both
printers from the printer folder (the printer created by the HP wizard and the printer created
by the printer's setup program). Run the HP wizard a second time. This time choose existing
drivers. You will see two similar printer strings. One will be from the first HP wizard
install and one from the printer's setup install. Choose one. If the wizard exists
successfully you chose the proper driver. If the installation fails, rerun the wizard and
this time choose the other driver. Finally, check to make sure the printer created is the
default printer. This can be accomplished by right mouse clicking on the printer in the
printer's folder and seeing if "Set As Default" is checked.
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
Some HP printer drivers do not install correctly using the printer.INF file and the
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer.INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
Hewlett-Packard Install Network Printer Wizard
v 02.00
Table of Contents
1. Overview
2. DHCP
3. DNS
4. IP Address Support
5. Suggest IP Address (Autonet)
6. NetWare Support
a. Supported Versions
b. NDS Multiple Tree Support
c. NetWare 5 Support
d. No Novell Print Path
e. No NDS volumes
f. Support for NDS localities
7. Device Discovery
a. Gateway
b. Multi-homed Machines
c. 0.0.0.0 IP Addresses
d. Class A Subnet Masks
8. Driver Support
a. License Acceptance
b. Have Disk Support
c. HP Driver Updates
9. IPX Port Monitor and Data Corruption
10. Printer Names
11. Printer Share Name
12. Error Messages
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
1. Overview
This Read Me file contains last-minute product information for the Hewlett-Packard
Install Network Printer wizard for Windows 95/ 98 and Windows NT.
2. DHCP
If you try to change just the subnet mask on an HP JetDirect print server that has
been configured via DHCP, you will get an error message while using the Hewlett-Packard
Install Network Printer wizard. Once a JetDirect print server has been manually
configured, it will store the IP address, subnet mask and default gateway statically
instead of trying to obtain them dynamically. Allowing a static change only to the
subnet mask would cause DHCP-configured IP conflicts in the future. For more information
on this subject, see the HP JetDirect documentation.
3. DNS
In a DNS environment, the Hewlett-Packard Install Network Printer wizard will
automatically set up the port with the host name rather than the IP address. If you have
a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer
will never print a page. We consider this environment to be an invalid DNS environment.
To fix the port without changing the DNS environment, view Properties for the printer.
Select the ports tab. Select the port that is in use for that printer. Click Configure
Port. Change the host name to the correct IP address.
4. IP Address Support
Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP
addresses are those addresses with the form of 224.xx.yy.zz
All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP
to be used to configure device on the network.
5. Suggest IP Address (Autonet)
The algorithm for obtaining the IP address for the "Suggest Settings..." button is
derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically
Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP
address is to randomly generate an address in the 169.254.x.x reserved address range,
then determine if it is in use on the network. If it is in use, generate another address
in the range. Repeat until an address is generated that is not in use. The resulting
address is not intended for use on the Internet. Microsoft uses a similar scheme for
determining an IP address on Windows 98 and Windows 2000 when the system is in an environment
that doesn't have a DHCP or bootp server, and the system is configured to dynamically
determine and IP address.
6. NetWare Support
a. Supported Versions
The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell
queue creation, you must be logged into a Novell bindery or NDS server using a Novell
supplied client requester. See www.novell.com for client updates.
b. NDS Multiple Tree Support
The Hewlett-Packard Install Network Printer wizard only provides support for the NDS
tree the user is currently logged into. If a different tree is desired you must quit
the application, change your login to the desired tree and rerun the application.
c. NetWare 5.0 Support
If NetWare 5 is configured for IPX, and an IPX connection is being used on the client,
the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print
queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on
the client, the Hewlett-Packard Install Network Printer wizard can be used to create
an IP print path. If the client on which the application is being run has an IPX
connection to the NetWare 5 server, and the client is logged in, an NDS queue server
print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print
path will be recommended. In order to create NDS queues, an IPX connection with a
login must be present.
d. No Novell Print Path
The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship
with the Novell Client for 95 and NT. The application will look for these DLLs and
the associated entry points within them. If any of the necessary DLLs are missing,
or if they do not have the needed entry points (perhaps an old version), a Novell
print path will not be available although other supported print paths will be. If a
Novell print path is not available when you think one should be, try upgrading your
Novell client software to a newer version.
e. No NDS volumes shown in NetWare 4.11
There is a known problem reading the list of available NDS volumes in NetWare 4.11 with
service pack prior to version 7. This problem has been seen in cases were the user
logs into an NDS context that is at a lower level than the available volumes. The solution
is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2.
f. Support for NDS localities
The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the
NDS context.
7. Device Discovery
a. Gateway
Discovery performance will be very slow if your client PC does not have a gateway
configured. To configure a gateway, choose "Network" in the Control Panel, and then
look at Properties for the TCP/IP protocol. An input should appear for entering a
gateway address. See the online help for a more information on TCP/IP and gateways.
b. Multi-homed Machines
Multi-homed machines are not supported. In a multi-homed machine, it is not possible
to distinguish between multiple devices with the same IP address. A multi-homed
machine is a computer with more than one network connection. It is possible for two
or more devices on different networks to have the same IP address. A multi-homed
machine would see both devices and there would be no guarantee that you are
configuring the correct device. In this case, either disable all but the correct
network card, or configure the HP JetDirect print server from another PC that is on
the correct network and has only one network card. This problem may also occur on
PCs that contains both a network card and a dial-up adapter.
c. 0.0.0.0 IP Addresses
Assuming that an IP address is not assigned, a JetDirect-connected printer will have
an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After
2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to
configure a "0.0.0.0" device through an IP print path will fail. You must wait until
the HP JetDirect device has a non-zero IP address before attempting to configure it.
d. Class A Subnet Masks
If the machine running the Hewlett-Packard Install Network Printer wizard has an IP
subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device
discovery will suffer a significant performance degradation. To improve discovery
performance you must change your subnet mask to a non-Class A subnet mask.
8. Driver Support
a. License Support
Some drivers require the acceptance of a license. When installing a driver, if a
dialog appears that requests acceptance of a license, you must approve the license
before the application will continue. Failure to approve the license will result in
the application hanging.
b. Have Disk Support
To support new printers or drivers, the "Have Disk" button can be utilized during
driver installation. For the "Have Disk" functionality to work, the media must
contain an "inf" file (e.g. filename.inf). Some driver updates available on the
World Wide Web are in the form of self-extracting archives and are not in a format
that "Have Disk" can utilize. In this case, install the driver before running the
Hewlett-Packard Install Network Printer wizard.
c. HP Driver Updates
Hewlett-Packard driver updates can be found on the World Wide Web at:
www.hp.com/go/support
NOTE: This URL is subject to change.
9. IPX Port Monitor and Data Corruption
Some printers may experience data corruption when used with the Hewlett-Packard IPX
Port monitor under Windows NT. These errors may be corrected either by installing an
appropriate hot fix for NT or by installing Service Pack 4 from Microsoft.
10. Printer Names
When naming a printer within the Hewlett-Packard Install Network Printer wizard you
must enter a name in English that conforms to the Microsoft Printer Naming rules
(i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name
is required, assign the printer name in English and finish the install. Then open the
printer folder from the Control Panel and select the desired printer. Select "Rename"
from the File menu and rename the printer with a localized name.
11. Printer Share Name
Spaces are not allowed for naming printer shared name.
12. Error Messages
Error writing to for : The system cannot write to the specified file.
This error message may appear when attempting to print a test page or during regular
use. It usually means the printer is out of paper or unavailable. Check the printer
and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard
Install Network Printer wizard when this occurred, there is no need to rerun the
application. Simply locate the printer in the printer folder and right mouse click on
it. Choose "Properties" and select to print a test page. If you have corrected the
error condition, a test page should now print.
Driver cannot install. Must run printer's setup program.
When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard
Install Network Printer wizard may not be able to install the driver. You will receive an
error message stating that you need to run the printer's setup program. The Hewlett-Packard
Install Network Printer wizard may create the printer in the printer's folder despite this error.
The installed printer will not function properly. After the wizard exits, run the setup
program that comes with the printer. You may have to identify the printer as existing on a
local port such as LPT1. Install the printer using this setup program. Now delete both
printers from the printer folder (the printer created by the HP wizard and the printer created
by the printer's setup program). Run the HP wizard a second time. This time choose existing
drivers. You will see two similar printer strings. One will be from the first HP wizard
install and one from the printer's setup install. Choose one. If the wizard exists
successfully you chose the proper driver. If the installation fails, rerun the wizard and
this time choose the other driver. Finally, check to make sure the printer created is the
default printer. This can be accomplished by right mouse clicking on the printer in the
printer's folder and seeing if "Set As Default" is checked.
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
Some HP printer drivers do not install correctly using the printer.INF file and the
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer.INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
Hewlett-Packard Install Network Printer Wizard v 02.00
Table of Contents
1. Overview
2. DHCP
3. DNS
4. IP Address Support
5. Suggest IP Address (Autonet)
6. NetWare Support
a. Supported Versions
b. NDS Multiple Tree Support
c. NetWare 5 Support
d. No Novell Print Path
e. No NDS volumes
f. Support for NDS localities
7. Device Discovery
a. Gateway
b. Multi-homed Machines
c. 0.0.0.0 IP Addresses
d. Class A Subnet Masks
8. Driver Support
a. License Acceptance
b. Have Disk Support
c. HP Driver Updates
9. IPX Port Monitor and Data Corruption 10. Printer Names 11. Printer Share Name 12. Error Messages 13. Known Problems Installing HP Printer Drivers Under Windows 95/98 14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
1. Overview
This Read Me file contains last-minute product information for the Hewlett-Packard
Install Network Printer wizard for Windows 95/ 98 and Windows NT.
2. DHCP
If you try to change just the subnet mask on an HP JetDirect print server that has
been configured via DHCP, you will get an error message while using the Hewlett-Packard
Install Network Printer wizard. Once a JetDirect print server has been manually
configured, it will store the IP address, subnet mask and default gateway statically
instead of trying to obtain them dynamically. Allowing a static change only to the
subnet mask would cause DHCP-configured IP conflicts in the future. For more information
on this subject, see the HP JetDirect documentation.
3. DNS
In a DNS environment, the Hewlett-Packard Install Network Printer wizard will
automatically set up the port with the host name rather than the IP address. If you have
a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer
will never print a page. We consider this environment to be an invalid DNS environment.
To fix the port without changing the DNS environment, view Properties for the printer.
Select the ports tab. Select the port that is in use for that printer. Click Configure
Port. Change the host name to the correct IP address.
4. IP Address Support
Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP
addresses are those addresses with the form of 224.xx.yy.zz
All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP
to be used to configure device on the network.
5. Suggest IP Address (Autonet)
The algorithm for obtaining the IP address for the "Suggest Settings..." button is
derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically
Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP
address is to randomly generate an address in the 169.254.x.x reserved address range,
then determine if it is in use on the network. If it is in use, generate another address
in the range. Repeat until an address is generated that is not in use. The resulting
address is not intended for use on the Internet. Microsoft uses a similar scheme for
determining an IP address on Windows 98 and Windows 2000 when the system is in an environment
that doesn't have a DHCP or bootp server, and the system is configured to dynamically
determine and IP address.
6. NetWare Support
a. Supported Versions
The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell
queue creation, you must be logged into a Novell bindery or NDS server using a Novell
supplied client requester. See www.novell.com for client updates.
b. NDS Multiple Tree Support
The Hewlett-Packard Install Network Printer wizard only provides support for the NDS
tree the user is currently logged into. If a different tree is desired you must quit
the application, change your login to the desired tree and rerun the application.
c. NetWare 5.0 Support
If NetWare 5 is configured for IPX, and an IPX connection is being used on the client,
the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print
queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on
the client, the Hewlett-Packard Install Network Printer wizard can be used to create
an IP print path. If the client on which the application is being run has an IPX
connection to the NetWare 5 server, and the client is logged in, an NDS queue server
print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print
path will be recommended. In order to create NDS queues, an IPX connection with a
login must be present.
d. No Novell Print Path
The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship
with the Novell Client for 95 and NT. The application will look for these DLLs and
the associated entry points within them. If any of the necessary DLLs are missing,
or if they do not have the needed entry points (perhaps an old version), a Novell
print path will not be available although other supported print paths will be. If a
Novell print path is not available when you think one should be, try upgrading your
Novell client software to a newer version.
e. No NDS volumes shown in NetWare 4.11
There is a known problem reading the list of available NDS volumes in NetWare 4.11 with
service pack prior to version 7. This problem has been seen in cases were the user
logs into an NDS context that is at a lower level than the available volumes. The solution
is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2.
f. Support for NDS localities
The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the
NDS context.
7. Device Discovery
a. Gateway
Discovery performance will be very slow if your client PC does not have a gateway
configured. To configure a gateway, choose "Network" in the Control Panel, and then
look at Properties for the TCP/IP protocol. An input should appear for entering a
gateway address. See the online help for a more information on TCP/IP and gateways.
b. Multi-homed Machines
Multi-homed machines are not supported. In a multi-homed machine, it is not possible
to distinguish between multiple devices with the same IP address. A multi-homed
machine is a computer with more than one network connection. It is possible for two
or more devices on different networks to have the same IP address. A multi-homed
machine would see both devices and there would be no guarantee that you are
configuring the correct device. In this case, either disable all but the correct
network card, or configure the HP JetDirect print server from another PC that is on
the correct network and has only one network card. This problem may also occur on
PCs that contains both a network card and a dial-up adapter.
c. 0.0.0.0 IP Addresses
Assuming that an IP address is not assigned, a JetDirect-connected printer will have
an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After
2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to
configure a "0.0.0.0" device through an IP print path will fail. You must wait until
the HP JetDirect device has a non-zero IP address before attempting to configure it.
d. Class A Subnet Masks
If the machine running the Hewlett-Packard Install Network Printer wizard has an IP
subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device
discovery will suffer a significant performance degradation. To improve discovery
performance you must change your subnet mask to a non-Class A subnet mask.
8. Driver Support
a. License Support
Some drivers require the acceptance of a license. When installing a driver, if a
dialog appears that requests acceptance of a license, you must approve the license
before the application will continue. Failure to approve the license will result in
the application hanging.
b. Have Disk Support
To support new printers or drivers, the "Have Disk" button can be utilized during
driver installation. For the "Have Disk" functionality to work, the media must
contain an "inf" file (e.g. filename.inf). Some driver updates available on the
World Wide Web are in the form of self-extracting archives and are not in a format
that "Have Disk" can utilize. In this case, install the driver before running the
Hewlett-Packard Install Network Printer wizard.
c. HP Driver Updates
Hewlett-Packard driver updates can be found on the World Wide Web at:
www.hp.com/go/support
NOTE: This URL is subject to change.
9. IPX Port Monitor and Data Corruption
Some printers may experience data corruption when used with the Hewlett-Packard IPX
Port monitor under Windows NT. These errors may be corrected either by installing an
appropriate hot fix for NT or by installing Service Pack 4 from Microsoft.
10. Printer Names
When naming a printer within the Hewlett-Packard Install Network Printer wizard you
must enter a name in English that conforms to the Microsoft Printer Naming rules
(i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name
is required, assign the printer name in English and finish the install. Then open the
printer folder from the Control Panel and select the desired printer. Select "Rename"
from the File menu and rename the printer with a localized name.
11. Printer Share Name
Spaces are not allowed for naming printer shared name.
12. Error Messages
Error writing to for : The system cannot write to the specified file.
This error message may appear when attempting to print a test page or during regular
use. It usually means the printer is out of paper or unavailable. Check the printer
and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard
Install Network Printer wizard when this occurred, there is no need to rerun the
application. Simply locate the printer in the printer folder and right mouse click on
it. Choose "Properties" and select to print a test page. If you have corrected the
error condition, a test page should now print.
Driver cannot install. Must run printer's setup program.
When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard
Install Network Printer wizard may not be able to install the driver. You will receive an
error message stating that you need to run the printer's setup program. The Hewlett-Packard
Install Network Printer wizard may create the printer in the printer's folder despite this error.
The installed printer will not function properly. After the wizard exits, run the setup
program that comes with the printer. You may have to identify the printer as existing on a
local port such as LPT1. Install the printer using this setup program. Now delete both
printers from the printer folder (the printer created by the HP wizard and the printer created
by the printer's setup program). Run the HP wizard a second time. This time choose existing
drivers. You will see two similar printer strings. One will be from the first HP wizard
install and one from the printer's setup install. Choose one. If the wizard exists
successfully you chose the proper driver. If the installation fails, rerun the wizard and
this time choose the other driver. Finally, check to make sure the printer created is the
default printer. This can be accomplished by right mouse clicking on the printer in the
printer's folder and seeing if "Set As Default" is checked.
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
Some HP printer drivers do not install correctly using the printer.INF file and the
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer.INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
phuckphacethemadmadmotherphucker
on
Cradle to Cradle
·
· Score: -1
"The Shithole", by News For Turds
Sung to the tune of "The Middle" by Jimmy Eat World.
Enjoy!
Hey, don't write that comment yet.
It's only on Slashdot you feel left out,
And looked down on.
Just troll your best.
Troll everything you can.
It doesn't matter if it's good enough,
For some A C.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
Hey, you know they're all the same.
You know you're doing better while logged in,
So don't A C.
Troll right now.
And just be an ass.
And don't you worry what the moderators
Are gonna say.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
"The Shithole", by News For Turds
Sung to the tune of "The Middle" by Jimmy Eat World.
Enjoy!
Hey, don't write that comment yet.
It's only on Slashdot you feel left out,
And looked down on.
Just troll your best.
Troll everything you can.
It doesn't matter if it's good enough,
For some A C.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
Hey, you know they're all the same.
You know you're doing better while logged in,
So don't A C.
Troll right now.
And just be an ass.
And don't you worry what the moderators
Are gonna say.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
This is to the tune of "The Middle" by Jimmy Eat World.
Hey, don't write that comment yet.
It's only on Slashdot you feel left out,
And looked down on.
Just troll your best.
Troll everything you can.
It doesn't matter if it's good enough,
For some A C.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
Hey, you know they're all the same.
You know you're doing better while logged in,
So don't A C.
Troll right now.
And just be an ass.
And don't you worry what the moderators
Are gonna say.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
Once again, I bow to you for your fr0st p1st. And to you, I offer these words of wisdom:
Posted by michael on Tuesday June 04, @12:51PM from the top-down dept. JCallery writes "CNN is reporting on the plan drawn up by ICANN's restructuring committee after ICANN decided to abandon direct elections." We had a earlier story about the restructuring plan with some notes from one of the board members who attended. ICANN's plan is online and a must-read for anyone interested in internet governance issues. Below, I have some notes about why this restructuring would be terrible idea for regular internet users.
If you've followed the history of ICANN at all, you know that it was originally set up to have substantial representation from the general public (known as At-Large representatives) - 9 of 18 board members. The original unelected board immediately set about undermining that, only electing 5 members and keeping on four "board-squatters" from the original unelected bunch.
The elections of the five At-Large members had two flaws from the point of view of ICANN's unelected board:
There were assorted technical issues with the voting process, due apparently to incompetence from the contractor who handled it. Two of the five new board members who were elected did not represent the same corporate interests as the rest of the board. Of these two flaws, the second was by far the more severe. The board risked losing control of ICANN to people who might run it for the public good rather than for the good of the corporations represented on the board. They started backing away from having any sort of elected representation whatsoever. In February 2002 ICANN President Lynn floated a reform proposal which would eliminate the At-Large representation - or rather, it would keep something called "At-Large", that would no longer be elected by the general public but instead appointed by the Board itself. Instead of the general public picking new ICANN Board members, the ICANN Board would pick new ICANN Board members. This was followed by a vote which confirmed ICANN's commitment to eliminating elected representation.
Now the reform proposal is out. There would be two classes of board members:
approximately eight ex-officio members (members holding the board seat due to some other title or position they hold) approximately five to eleven members picked by a Nominating Committee (the Committee to be chosen by the current Board) and perhaps confirmed by the Board It is important to note how thoroughly captured this process is. Many of the ex-officio seats accrue from positions that are selected by the ICANN Board. So the ICANN Board picks someone to be chief dogwalker, and the chief dogwalker gets an automatic position on ICANN's Board.
The seats selected by the Nominating Committee are also extremely vulnerable to capture. Let me use a real-life example of how nominating committees work to show what I mean: my credit union.
My credit union has a board structure very similar to the one proposed for ICANN: several ex-officio members, and a number of seats elected by the general populace (everyone who has an account at the credit union). This structure is actually more flexible than that proposed for ICANN, since ICANN does not plan any direct elections at all. However, the credit union membership picks from among candidates selected by a Nominating Committee. Every year or two, I get a ballot in the mail. I can choose from among all the candidates selected by the Nominating Committee, and I can check boxes for the candidates that I prefer, up to the number of open seats available on the Board.
I never return these ballots. Why, you might ask? Because the number of candidates is usually identical to the number of open seats. Three empty seats, three candidates to choose from. Six empty seats, six candidates to choose from. I think one year they might have had more candidates than open seats, but it was an aberration.
This system apparently works well for credit unions: would you believe that they pay interest on my checking account? What it does guarantee is that all future Board members will represent the same biases that are present in the Board at the instant the system was instituted. In my credit union's case, this guarantees "fiscal responsibility" or "fiscal conservatism".
For ICANN, what it would do is institutionalize the biases currently present. Whatever biases are there right now, will be there forever, as the system becomes a self-reinforcing feedback loop with no external controls.
The Board's current biases are toward:
expanding ICANN's mission from a purely technical body to one that is willing to govern the Internet - taking on assorted social/political issues as it sees fit running ICANN for private profit rather than public benefit Neither of these two traits needs reinforcing. Karl Auerbach, one of ICANN's At-Large directors, has his thoughts on a possible ICANN structure.
Posted by michael on Tuesday June 04, @12:51PM from the top-down dept. JCallery writes "CNN is reporting on the plan drawn up by ICANN's restructuring committee after ICANN decided to abandon direct elections." We had a earlier story about the restructuring plan with some notes from one of the board members who attended. ICANN's plan is online and a must-read for anyone interested in internet governance issues. Below, I have some notes about why this restructuring would be terrible idea for regular internet users.
If you've followed the history of ICANN at all, you know that it was originally set up to have substantial representation from the general public (known as At-Large representatives) - 9 of 18 board members. The original unelected board immediately set about undermining that, only electing 5 members and keeping on four "board-squatters" from the original unelected bunch.
The elections of the five At-Large members had two flaws from the point of view of ICANN's unelected board:
There were assorted technical issues with the voting process, due apparently to incompetence from the contractor who handled it. Two of the five new board members who were elected did not represent the same corporate interests as the rest of the board. Of these two flaws, the second was by far the more severe. The board risked losing control of ICANN to people who might run it for the public good rather than for the good of the corporations represented on the board. They started backing away from having any sort of elected representation whatsoever. In February 2002 ICANN President Lynn floated a reform proposal which would eliminate the At-Large representation - or rather, it would keep something called "At-Large", that would no longer be elected by the general public but instead appointed by the Board itself. Instead of the general public picking new ICANN Board members, the ICANN Board would pick new ICANN Board members. This was followed by a vote which confirmed ICANN's commitment to eliminating elected representation.
Now the reform proposal is out. There would be two classes of board members:
approximately eight ex-officio members (members holding the board seat due to some other title or position they hold) approximately five to eleven members picked by a Nominating Committee (the Committee to be chosen by the current Board) and perhaps confirmed by the Board It is important to note how thoroughly captured this process is. Many of the ex-officio seats accrue from positions that are selected by the ICANN Board. So the ICANN Board picks someone to be chief dogwalker, and the chief dogwalker gets an automatic position on ICANN's Board.
The seats selected by the Nominating Committee are also extremely vulnerable to capture. Let me use a real-life example of how nominating committees work to show what I mean: my credit union.
My credit union has a board structure very similar to the one proposed for ICANN: several ex-officio members, and a number of seats elected by the general populace (everyone who has an account at the credit union). This structure is actually more flexible than that proposed for ICANN, since ICANN does not plan any direct elections at all. However, the credit union membership picks from among candidates selected by a Nominating Committee. Every year or two, I get a ballot in the mail. I can choose from among all the candidates selected by the Nominating Committee, and I can check boxes for the candidates that I prefer, up to the number of open seats available on the Board.
I never return these ballots. Why, you might ask? Because the number of candidates is usually identical to the number of open seats. Three empty seats, three candidates to choose from. Six empty seats, six candidates to choose from. I think one year they might have had more candidates than open seats, but it was an aberration.
This system apparently works well for credit unions: would you believe that they pay interest on my checking account? What it does guarantee is that all future Board members will represent the same biases that are present in the Board at the instant the system was instituted. In my credit union's case, this guarantees "fiscal responsibility" or "fiscal conservatism".
For ICANN, what it would do is institutionalize the biases currently present. Whatever biases are there right now, will be there forever, as the system becomes a self-reinforcing feedback loop with no external controls.
The Board's current biases are toward:
expanding ICANN's mission from a purely technical body to one that is willing to govern the Internet - taking on assorted social/political issues as it sees fit running ICANN for private profit rather than public benefit Neither of these two traits needs reinforcing. Karl Auerbach, one of ICANN's At-Large directors, has his thoughts on a possible ICANN structure.
Posted by timothy on Tuesday June 04, @12:04PM
from the at-least-get-rid-of-the-income-tax dept.
tekan writes: "The National Review has an interesting article about the challenges ahead for the settlement of Mars (or the Moon), as well as how Law and sovereignty issues factor into colonizing these bodies." Perhaps most interesting are the reasons cited for entering into the treaty at all -- which had little to do with keeping space a peaceful utopia.
( Read More... | 56 comments )
U.S. Asked to Put Purchasing Power to Good Use
Posted by michael on Tuesday June 04, @11:15AM
from the power-of-the-purse dept.
James Love writes "Today Ralph Nader and I wrote U.S. Office of Management and Budget Director Mitch Daniels to ask the federal government to use its power as a big consumer to address competition issues in the market for PC client software. These are some of the practices we want OMB to examine: OMB is asked to provide information on federal expenditures for Microsoft products, determine if a software "monoculture" makes the federal government more vulnerable to computer viruses or unauthorized access to federal computers, and to consider a number of strategies to use the US government's purchasing power to promote competition and make Microsoft behave; OMB is asked to consider if Microsoft should be required (as a matter of procurement policy) to fully disclose the file formats of its office productivity and multimedia programs, so that the data created in such programs could be reliably read by non-Microsoft software; OMB is asked to consider if it should place a cap of the market share for any one vendor of PC client software, and have the size of the cap depend upon Microsoft's willingness to open up its interface information, or port its MS Office products to additional platforms; OMB is also asked to consider if it would be more efficient to buy code for office productivity products (and release into the public domain), rather than spend billions to lease software."
( Read More... | 221 comments )
Features: Amazon.Heartbreak
Posted by JonKatz on Tuesday June 04, @10:15AM
from the inside-the-cult-of-Bezos dept.
Ex-Amazon.com wage slave Mike Daisey asks in one fantasy e-mail to his then-boss Jeff Bezos: "Would it have been so hard to build a cool and quirky bookstore instead of a soulless virtual megamall? You were afraid: afraid to define the company, afraid the stock would drop, afraid not to feed the monster. What you sacrifice reveals what you value, and you're a fool if you think the world will forgive you in the end." Prescient stuff. 21 Dog Years: Doing Time @ Amazon.com, Daisey's hilarious, heartbreaking and surprisingly powerful recounting of life inside what may be the world's strangest, most ephemeral company -- a symbol of all that was exciting, misguided, and ultimately misunderstood about business online during the mad years. It's also one of the best books ever written about the Net, an unsparing, even brutal indictment not only of hubris, but of media and, of course, the corporate-spawned hype that shapes so much of American life.
( Read More... | 10276 bytes in body | 254 comments | Features )
Developers: Unofficial GBA SDK Available for Free
Posted by CmdrTaco on Tuesday June 04, @09:22AM
from the time-for-me-to-design-super-final-zelda-bros. dept.
BlackGriffen writes "Anyone who is interested in making their own Gameboy Advance ROMs can go get an unofficial GBA SDK . With this and a flash ROM kit from someplace like lan-kwei.com, we could see a flourishing indie game making community. Available for Linux and Mac OS X only (for now, it's open source)."
( Read More... | 106 comments | Developers )
Apple: QuickTime 6 Public Beta Available
Posted by pudge on Tuesday June 04, @08:29AM
from the i-got-yer-royalty-fee-right-here dept.
krugdm writes "Apple has announced that a public beta of QuickTime 6 is now available. MPEG-4 support is there, as well as support for other technologies, such as JPEG2000, and Flash 5. The beta expires in October. An interesting in the FAQ's says that, '... because QuickTime 6 will include royalty-bearing technologies, a new QuickTime Pro key will be required to unlock pro functionality in the final release.'" It is available for Mac OS, Mac OS X, and Windows, and supports AAC audio too. I also wonder why MPEG-4 is ".mp4". ".mp3" isn't for MPEG-3, after all. Flummery!
( Read More... | 313 comments | Apple )
SuSE Denies UnitedLinux Per-Seat License Model
Posted by CmdrTaco on Tuesday June 04, @07:47AM
from the plot-thickens dept.
m0RpHeus writes "According to Linux Today, SuSE is denying per seat licensing for United Linux. `We really don't plan any per-seat licensing for UnitedLinux,' said SuSE's US Director of Sales Holger Dyroff. UnitedLinux, it seems is divided on this issue."
( Read More... | 155 comments )
Verisign Offers Wiretapping Services
Posted by michael on Tuesday June 04, @06:50AM
from the suddenly-there-came-a-tapping dept.
LinuxDeckard writes "According to this article at FindLaw, VeriSign will soon be offering its 'NetDiscovery' wire tapping services for a monthly fee. NetDiscovery will allow Telecoms to comply with court ordered wire taps." Verisign's press release is informative. This appears to be tapping of voice calls rather than internet usage. I assume it would work something like this: telecom company gets a wiretap notification from the FBI or local police; it routes all calls to/from $TARGET through a Verisign switch; Verisign does the tapping and reporting to the tappers. If you think this doesn't affect you, keep in mind that under the PATRIOT Act the barrier for wiretapping is set very low indeed.
( Read More... | 148 comments )
IBM Spins Down
Posted by michael on Tuesday June 04, @05:58AM
from the hdparm-Y dept.
beggs writes "IBM and Hitachi have signed an agreement which will take IBM out of the hard drive market in three years. This press release on IBM's web site gives some details of the deal. 18,000 IBM employees and all their hard drive related patents will join about 6,000 Hitachi employees to form a new company that will be a subsidiary of Hitachi. Sad to see big blue out of the hard drive business, they have made a lot of contributions to computing." We did a story when they announced their plans back in April.
( Read More... | 171 comments )
ReplayTV 4500: No Hacking, or Else
Posted by michael on Tuesday June 04, @03:10AM
from the stuff-to-avoid dept.
mcglk writes "I was happy to see that SonicBlue had released its new generation of ReplayTV, the 4500. And it was $250 cheaper than the 4000. Except for that $250 "one-time service activation fee." Worse is the agreement that goes along with it. Term 1A basically says, "No more hacking." Term 1G says that they can enable or disable anything they want without notice. And Term 2C says that if someone even alleges you are infringing on copyright, you can be shut down with no notice, no recourse, and there's nothing you can do about it--the agreement indemnifies them completely. I was really looking forward to getting one of these, too." Under that agreement, SonicBlue claims the right to destroy your device when you connect for updates.
( Read More... | 271 comments )
Taiwan to Start National Push For Free Software
Posted by timothy on Tuesday June 04, @12:28AM
from the makes-good-sense dept.
Andy Tai writes: "Taiwan will start a national plan to jump-start the development and use of Free (libre) Software, according to this report by the Central News Agency, the government news agency of Taiwan, Rep. of China. Due to high Microsoft license fees and also to improve the levels of software technology in Taiwan, this plan includes the creation of a totally Chinese free software environment for Taiwan users, free software application development, and training of 120,000 people for free software skills, as well as efforts at schools to provide diverse information technology environments to ensure the freedom of information. The original article is in Chinese; an English summary appears in this Kuro5hin article."
( Read More... | 242 comments )
Rockbox Replaces Archos Firmware
Posted by timothy on Monday June 03, @09:22PM
from the but-that's-unpossible dept.
bagder writes: "The guys in the Rockbox project have just released the first working firmware replacement for the Archos portable hard disk-based MP3-players. The software is all GPL. Every tiny bit was reverse engineered, disassembled and then re-written from scratch. You can go download your own firmware right now!"
( Read More... | 170 comments )
Slashdot Mirror
I Agree With This Post
C to tha mutha phukken LIT
crap is cool
.INF file and the
.INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
Hewlett-Packard Install Network Printer Wizard
v 02.00
Table of Contents
1. Overview
2. DHCP
3. DNS
4. IP Address Support
5. Suggest IP Address (Autonet)
6. NetWare Support
a. Supported Versions
b. NDS Multiple Tree Support
c. NetWare 5 Support
d. No Novell Print Path
e. No NDS volumes
f. Support for NDS localities
7. Device Discovery
a. Gateway
b. Multi-homed Machines
c. 0.0.0.0 IP Addresses
d. Class A Subnet Masks
8. Driver Support
a. License Acceptance
b. Have Disk Support
c. HP Driver Updates
9. IPX Port Monitor and Data Corruption
10. Printer Names
11. Printer Share Name
12. Error Messages
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
1. Overview
This Read Me file contains last-minute product information for the Hewlett-Packard
Install Network Printer wizard for Windows 95/ 98 and Windows NT.
2. DHCP
If you try to change just the subnet mask on an HP JetDirect print server that has
been configured via DHCP, you will get an error message while using the Hewlett-Packard
Install Network Printer wizard. Once a JetDirect print server has been manually
configured, it will store the IP address, subnet mask and default gateway statically
instead of trying to obtain them dynamically. Allowing a static change only to the
subnet mask would cause DHCP-configured IP conflicts in the future. For more information
on this subject, see the HP JetDirect documentation.
3. DNS
In a DNS environment, the Hewlett-Packard Install Network Printer wizard will
automatically set up the port with the host name rather than the IP address. If you have
a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer
will never print a page. We consider this environment to be an invalid DNS environment.
To fix the port without changing the DNS environment, view Properties for the printer.
Select the ports tab. Select the port that is in use for that printer. Click Configure
Port. Change the host name to the correct IP address.
4. IP Address Support
Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP
addresses are those addresses with the form of 224.xx.yy.zz
All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP
to be used to configure device on the network.
5. Suggest IP Address (Autonet)
The algorithm for obtaining the IP address for the "Suggest Settings..." button is
derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically
Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP
address is to randomly generate an address in the 169.254.x.x reserved address range,
then determine if it is in use on the network. If it is in use, generate another address
in the range. Repeat until an address is generated that is not in use. The resulting
address is not intended for use on the Internet. Microsoft uses a similar scheme for
determining an IP address on Windows 98 and Windows 2000 when the system is in an environment
that doesn't have a DHCP or bootp server, and the system is configured to dynamically
determine and IP address.
6. NetWare Support
a. Supported Versions
The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell
queue creation, you must be logged into a Novell bindery or NDS server using a Novell
supplied client requester. See www.novell.com for client updates.
b. NDS Multiple Tree Support
The Hewlett-Packard Install Network Printer wizard only provides support for the NDS
tree the user is currently logged into. If a different tree is desired you must quit
the application, change your login to the desired tree and rerun the application.
c. NetWare 5.0 Support
If NetWare 5 is configured for IPX, and an IPX connection is being used on the client,
the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print
queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on
the client, the Hewlett-Packard Install Network Printer wizard can be used to create
an IP print path. If the client on which the application is being run has an IPX
connection to the NetWare 5 server, and the client is logged in, an NDS queue server
print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print
path will be recommended. In order to create NDS queues, an IPX connection with a
login must be present.
d. No Novell Print Path
The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship
with the Novell Client for 95 and NT. The application will look for these DLLs and
the associated entry points within them. If any of the necessary DLLs are missing,
or if they do not have the needed entry points (perhaps an old version), a Novell
print path will not be available although other supported print paths will be. If a
Novell print path is not available when you think one should be, try upgrading your
Novell client software to a newer version.
e. No NDS volumes shown in NetWare 4.11
There is a known problem reading the list of available NDS volumes in NetWare 4.11 with
service pack prior to version 7. This problem has been seen in cases were the user
logs into an NDS context that is at a lower level than the available volumes. The solution
is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2.
f. Support for NDS localities
The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the
NDS context.
7. Device Discovery
a. Gateway
Discovery performance will be very slow if your client PC does not have a gateway
configured. To configure a gateway, choose "Network" in the Control Panel, and then
look at Properties for the TCP/IP protocol. An input should appear for entering a
gateway address. See the online help for a more information on TCP/IP and gateways.
b. Multi-homed Machines
Multi-homed machines are not supported. In a multi-homed machine, it is not possible
to distinguish between multiple devices with the same IP address. A multi-homed
machine is a computer with more than one network connection. It is possible for two
or more devices on different networks to have the same IP address. A multi-homed
machine would see both devices and there would be no guarantee that you are
configuring the correct device. In this case, either disable all but the correct
network card, or configure the HP JetDirect print server from another PC that is on
the correct network and has only one network card. This problem may also occur on
PCs that contains both a network card and a dial-up adapter.
c. 0.0.0.0 IP Addresses
Assuming that an IP address is not assigned, a JetDirect-connected printer will have
an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After
2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to
configure a "0.0.0.0" device through an IP print path will fail. You must wait until
the HP JetDirect device has a non-zero IP address before attempting to configure it.
d. Class A Subnet Masks
If the machine running the Hewlett-Packard Install Network Printer wizard has an IP
subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device
discovery will suffer a significant performance degradation. To improve discovery
performance you must change your subnet mask to a non-Class A subnet mask.
8. Driver Support
a. License Support
Some drivers require the acceptance of a license. When installing a driver, if a
dialog appears that requests acceptance of a license, you must approve the license
before the application will continue. Failure to approve the license will result in
the application hanging.
b. Have Disk Support
To support new printers or drivers, the "Have Disk" button can be utilized during
driver installation. For the "Have Disk" functionality to work, the media must
contain an "inf" file (e.g. filename.inf). Some driver updates available on the
World Wide Web are in the form of self-extracting archives and are not in a format
that "Have Disk" can utilize. In this case, install the driver before running the
Hewlett-Packard Install Network Printer wizard.
c. HP Driver Updates
Hewlett-Packard driver updates can be found on the World Wide Web at:
www.hp.com/go/support
NOTE: This URL is subject to change.
9. IPX Port Monitor and Data Corruption
Some printers may experience data corruption when used with the Hewlett-Packard IPX
Port monitor under Windows NT. These errors may be corrected either by installing an
appropriate hot fix for NT or by installing Service Pack 4 from Microsoft.
10. Printer Names
When naming a printer within the Hewlett-Packard Install Network Printer wizard you
must enter a name in English that conforms to the Microsoft Printer Naming rules
(i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name
is required, assign the printer name in English and finish the install. Then open the
printer folder from the Control Panel and select the desired printer. Select "Rename"
from the File menu and rename the printer with a localized name.
11. Printer Share Name
Spaces are not allowed for naming printer shared name.
12. Error Messages
Error writing to for : The system cannot write to the specified file.
This error message may appear when attempting to print a test page or during regular
use. It usually means the printer is out of paper or unavailable. Check the printer
and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard
Install Network Printer wizard when this occurred, there is no need to rerun the
application. Simply locate the printer in the printer folder and right mouse click on
it. Choose "Properties" and select to print a test page. If you have corrected the
error condition, a test page should now print.
Driver cannot install. Must run printer's setup program.
When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard
Install Network Printer wizard may not be able to install the driver. You will receive an
error message stating that you need to run the printer's setup program. The Hewlett-Packard
Install Network Printer wizard may create the printer in the printer's folder despite this error.
The installed printer will not function properly. After the wizard exits, run the setup
program that comes with the printer. You may have to identify the printer as existing on a
local port such as LPT1. Install the printer using this setup program. Now delete both
printers from the printer folder (the printer created by the HP wizard and the printer created
by the printer's setup program). Run the HP wizard a second time. This time choose existing
drivers. You will see two similar printer strings. One will be from the first HP wizard
install and one from the printer's setup install. Choose one. If the wizard exists
successfully you chose the proper driver. If the installation fails, rerun the wizard and
this time choose the other driver. Finally, check to make sure the printer created is the
default printer. This can be accomplished by right mouse clicking on the printer in the
printer's folder and seeing if "Set As Default" is checked.
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
Some HP printer drivers do not install correctly using the printer
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
Hewlett-Packard Install Network Printer Wizard
.INF file and the
.INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
v 02.00
Table of Contents
1. Overview
2. DHCP
3. DNS
4. IP Address Support
5. Suggest IP Address (Autonet)
6. NetWare Support
a. Supported Versions
b. NDS Multiple Tree Support
c. NetWare 5 Support
d. No Novell Print Path
e. No NDS volumes
f. Support for NDS localities
7. Device Discovery
a. Gateway
b. Multi-homed Machines
c. 0.0.0.0 IP Addresses
d. Class A Subnet Masks
8. Driver Support
a. License Acceptance
b. Have Disk Support
c. HP Driver Updates
9. IPX Port Monitor and Data Corruption
10. Printer Names
11. Printer Share Name
12. Error Messages
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
1. Overview
This Read Me file contains last-minute product information for the Hewlett-Packard
Install Network Printer wizard for Windows 95/ 98 and Windows NT.
2. DHCP
If you try to change just the subnet mask on an HP JetDirect print server that has
been configured via DHCP, you will get an error message while using the Hewlett-Packard
Install Network Printer wizard. Once a JetDirect print server has been manually
configured, it will store the IP address, subnet mask and default gateway statically
instead of trying to obtain them dynamically. Allowing a static change only to the
subnet mask would cause DHCP-configured IP conflicts in the future. For more information
on this subject, see the HP JetDirect documentation.
3. DNS
In a DNS environment, the Hewlett-Packard Install Network Printer wizard will
automatically set up the port with the host name rather than the IP address. If you have
a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer
will never print a page. We consider this environment to be an invalid DNS environment.
To fix the port without changing the DNS environment, view Properties for the printer.
Select the ports tab. Select the port that is in use for that printer. Click Configure
Port. Change the host name to the correct IP address.
4. IP Address Support
Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP
addresses are those addresses with the form of 224.xx.yy.zz
All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP
to be used to configure device on the network.
5. Suggest IP Address (Autonet)
The algorithm for obtaining the IP address for the "Suggest Settings..." button is
derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically
Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP
address is to randomly generate an address in the 169.254.x.x reserved address range,
then determine if it is in use on the network. If it is in use, generate another address
in the range. Repeat until an address is generated that is not in use. The resulting
address is not intended for use on the Internet. Microsoft uses a similar scheme for
determining an IP address on Windows 98 and Windows 2000 when the system is in an environment
that doesn't have a DHCP or bootp server, and the system is configured to dynamically
determine and IP address.
6. NetWare Support
a. Supported Versions
The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell
queue creation, you must be logged into a Novell bindery or NDS server using a Novell
supplied client requester. See www.novell.com for client updates.
b. NDS Multiple Tree Support
The Hewlett-Packard Install Network Printer wizard only provides support for the NDS
tree the user is currently logged into. If a different tree is desired you must quit
the application, change your login to the desired tree and rerun the application.
c. NetWare 5.0 Support
If NetWare 5 is configured for IPX, and an IPX connection is being used on the client,
the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print
queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on
the client, the Hewlett-Packard Install Network Printer wizard can be used to create
an IP print path. If the client on which the application is being run has an IPX
connection to the NetWare 5 server, and the client is logged in, an NDS queue server
print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print
path will be recommended. In order to create NDS queues, an IPX connection with a
login must be present.
d. No Novell Print Path
The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship
with the Novell Client for 95 and NT. The application will look for these DLLs and
the associated entry points within them. If any of the necessary DLLs are missing,
or if they do not have the needed entry points (perhaps an old version), a Novell
print path will not be available although other supported print paths will be. If a
Novell print path is not available when you think one should be, try upgrading your
Novell client software to a newer version.
e. No NDS volumes shown in NetWare 4.11
There is a known problem reading the list of available NDS volumes in NetWare 4.11 with
service pack prior to version 7. This problem has been seen in cases were the user
logs into an NDS context that is at a lower level than the available volumes. The solution
is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2.
f. Support for NDS localities
The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the
NDS context.
7. Device Discovery
a. Gateway
Discovery performance will be very slow if your client PC does not have a gateway
configured. To configure a gateway, choose "Network" in the Control Panel, and then
look at Properties for the TCP/IP protocol. An input should appear for entering a
gateway address. See the online help for a more information on TCP/IP and gateways.
b. Multi-homed Machines
Multi-homed machines are not supported. In a multi-homed machine, it is not possible
to distinguish between multiple devices with the same IP address. A multi-homed
machine is a computer with more than one network connection. It is possible for two
or more devices on different networks to have the same IP address. A multi-homed
machine would see both devices and there would be no guarantee that you are
configuring the correct device. In this case, either disable all but the correct
network card, or configure the HP JetDirect print server from another PC that is on
the correct network and has only one network card. This problem may also occur on
PCs that contains both a network card and a dial-up adapter.
c. 0.0.0.0 IP Addresses
Assuming that an IP address is not assigned, a JetDirect-connected printer will have
an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After
2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to
configure a "0.0.0.0" device through an IP print path will fail. You must wait until
the HP JetDirect device has a non-zero IP address before attempting to configure it.
d. Class A Subnet Masks
If the machine running the Hewlett-Packard Install Network Printer wizard has an IP
subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device
discovery will suffer a significant performance degradation. To improve discovery
performance you must change your subnet mask to a non-Class A subnet mask.
8. Driver Support
a. License Support
Some drivers require the acceptance of a license. When installing a driver, if a
dialog appears that requests acceptance of a license, you must approve the license
before the application will continue. Failure to approve the license will result in
the application hanging.
b. Have Disk Support
To support new printers or drivers, the "Have Disk" button can be utilized during
driver installation. For the "Have Disk" functionality to work, the media must
contain an "inf" file (e.g. filename.inf). Some driver updates available on the
World Wide Web are in the form of self-extracting archives and are not in a format
that "Have Disk" can utilize. In this case, install the driver before running the
Hewlett-Packard Install Network Printer wizard.
c. HP Driver Updates
Hewlett-Packard driver updates can be found on the World Wide Web at:
www.hp.com/go/support
NOTE: This URL is subject to change.
9. IPX Port Monitor and Data Corruption
Some printers may experience data corruption when used with the Hewlett-Packard IPX
Port monitor under Windows NT. These errors may be corrected either by installing an
appropriate hot fix for NT or by installing Service Pack 4 from Microsoft.
10. Printer Names
When naming a printer within the Hewlett-Packard Install Network Printer wizard you
must enter a name in English that conforms to the Microsoft Printer Naming rules
(i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name
is required, assign the printer name in English and finish the install. Then open the
printer folder from the Control Panel and select the desired printer. Select "Rename"
from the File menu and rename the printer with a localized name.
11. Printer Share Name
Spaces are not allowed for naming printer shared name.
12. Error Messages
Error writing to for : The system cannot write to the specified file.
This error message may appear when attempting to print a test page or during regular
use. It usually means the printer is out of paper or unavailable. Check the printer
and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard
Install Network Printer wizard when this occurred, there is no need to rerun the
application. Simply locate the printer in the printer folder and right mouse click on
it. Choose "Properties" and select to print a test page. If you have corrected the
error condition, a test page should now print.
Driver cannot install. Must run printer's setup program.
When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard
Install Network Printer wizard may not be able to install the driver. You will receive an
error message stating that you need to run the printer's setup program. The Hewlett-Packard
Install Network Printer wizard may create the printer in the printer's folder despite this error.
The installed printer will not function properly. After the wizard exits, run the setup
program that comes with the printer. You may have to identify the printer as existing on a
local port such as LPT1. Install the printer using this setup program. Now delete both
printers from the printer folder (the printer created by the HP wizard and the printer created
by the printer's setup program). Run the HP wizard a second time. This time choose existing
drivers. You will see two similar printer strings. One will be from the first HP wizard
install and one from the printer's setup install. Choose one. If the wizard exists
successfully you chose the proper driver. If the installation fails, rerun the wizard and
this time choose the other driver. Finally, check to make sure the printer created is the
default printer. This can be accomplished by right mouse clicking on the printer in the
printer's folder and seeing if "Set As Default" is checked.
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
Some HP printer drivers do not install correctly using the printer
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
Hewlett-Packard Install Network Printer Wizard v 02.00 Table of Contents 1. Overview 2. DHCP 3. DNS 4. IP Address Support 5. Suggest IP Address (Autonet) 6. NetWare Support a. Supported Versions b. NDS Multiple Tree Support c. NetWare 5 Support d. No Novell Print Path e. No NDS volumes f. Support for NDS localities 7. Device Discovery a. Gateway b. Multi-homed Machines c. 0.0.0.0 IP Addresses d. Class A Subnet Masks 8. Driver Support a. License Acceptance b. Have Disk Support c. HP Driver Updates 9. IPX Port Monitor and Data Corruption 10. Printer Names 11. Printer Share Name 12. Error Messages 13. Known Problems Installing HP Printer Drivers Under Windows 95/98 14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0 1. Overview This Read Me file contains last-minute product information for the Hewlett-Packard Install Network Printer wizard for Windows 95/ 98 and Windows NT. 2. DHCP If you try to change just the subnet mask on an HP JetDirect print server that has been configured via DHCP, you will get an error message while using the Hewlett-Packard Install Network Printer wizard. Once a JetDirect print server has been manually configured, it will store the IP address, subnet mask and default gateway statically instead of trying to obtain them dynamically. Allowing a static change only to the subnet mask would cause DHCP-configured IP conflicts in the future. For more information on this subject, see the HP JetDirect documentation. 3. DNS In a DNS environment, the Hewlett-Packard Install Network Printer wizard will automatically set up the port with the host name rather than the IP address. If you have a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer will never print a page. We consider this environment to be an invalid DNS environment. To fix the port without changing the DNS environment, view Properties for the printer. Select the ports tab. Select the port that is in use for that printer. Click Configure Port. Change the host name to the correct IP address. 4. IP Address Support Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP addresses are those addresses with the form of 224.xx.yy.zz All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP to be used to configure device on the network. 5. Suggest IP Address (Autonet) The algorithm for obtaining the IP address for the "Suggest Settings..." button is derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP address is to randomly generate an address in the 169.254.x.x reserved address range, then determine if it is in use on the network. If it is in use, generate another address in the range. Repeat until an address is generated that is not in use. The resulting address is not intended for use on the Internet. Microsoft uses a similar scheme for determining an IP address on Windows 98 and Windows 2000 when the system is in an environment that doesn't have a DHCP or bootp server, and the system is configured to dynamically determine and IP address. 6. NetWare Support a. Supported Versions The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell queue creation, you must be logged into a Novell bindery or NDS server using a Novell supplied client requester. See www.novell.com for client updates. b. NDS Multiple Tree Support The Hewlett-Packard Install Network Printer wizard only provides support for the NDS tree the user is currently logged into. If a different tree is desired you must quit the application, change your login to the desired tree and rerun the application. c. NetWare 5.0 Support If NetWare 5 is configured for IPX, and an IPX connection is being used on the client, the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on the client, the Hewlett-Packard Install Network Printer wizard can be used to create an IP print path. If the client on which the application is being run has an IPX connection to the NetWare 5 server, and the client is logged in, an NDS queue server print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print path will be recommended. In order to create NDS queues, an IPX connection with a login must be present. d. No Novell Print Path The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship with the Novell Client for 95 and NT. The application will look for these DLLs and the associated entry points within them. If any of the necessary DLLs are missing, or if they do not have the needed entry points (perhaps an old version), a Novell print path will not be available although other supported print paths will be. If a Novell print path is not available when you think one should be, try upgrading your Novell client software to a newer version. e. No NDS volumes shown in NetWare 4.11 There is a known problem reading the list of available NDS volumes in NetWare 4.11 with service pack prior to version 7. This problem has been seen in cases were the user logs into an NDS context that is at a lower level than the available volumes. The solution is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2. f. Support for NDS localities The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the NDS context. 7. Device Discovery a. Gateway Discovery performance will be very slow if your client PC does not have a gateway configured. To configure a gateway, choose "Network" in the Control Panel, and then look at Properties for the TCP/IP protocol. An input should appear for entering a gateway address. See the online help for a more information on TCP/IP and gateways. b. Multi-homed Machines Multi-homed machines are not supported. In a multi-homed machine, it is not possible to distinguish between multiple devices with the same IP address. A multi-homed machine is a computer with more than one network connection. It is possible for two or more devices on different networks to have the same IP address. A multi-homed machine would see both devices and there would be no guarantee that you are configuring the correct device. In this case, either disable all but the correct network card, or configure the HP JetDirect print server from another PC that is on the correct network and has only one network card. This problem may also occur on PCs that contains both a network card and a dial-up adapter. c. 0.0.0.0 IP Addresses Assuming that an IP address is not assigned, a JetDirect-connected printer will have an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After 2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to configure a "0.0.0.0" device through an IP print path will fail. You must wait until the HP JetDirect device has a non-zero IP address before attempting to configure it. d. Class A Subnet Masks If the machine running the Hewlett-Packard Install Network Printer wizard has an IP subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device discovery will suffer a significant performance degradation. To improve discovery performance you must change your subnet mask to a non-Class A subnet mask. 8. Driver Support a. License Support Some drivers require the acceptance of a license. When installing a driver, if a dialog appears that requests acceptance of a license, you must approve the license before the application will continue. Failure to approve the license will result in the application hanging. b. Have Disk Support To support new printers or drivers, the "Have Disk" button can be utilized during driver installation. For the "Have Disk" functionality to work, the media must contain an "inf" file (e.g. filename.inf). Some driver updates available on the World Wide Web are in the form of self-extracting archives and are not in a format that "Have Disk" can utilize. In this case, install the driver before running the Hewlett-Packard Install Network Printer wizard. c. HP Driver Updates Hewlett-Packard driver updates can be found on the World Wide Web at: www.hp.com/go/support NOTE: This URL is subject to change. 9. IPX Port Monitor and Data Corruption Some printers may experience data corruption when used with the Hewlett-Packard IPX Port monitor under Windows NT. These errors may be corrected either by installing an appropriate hot fix for NT or by installing Service Pack 4 from Microsoft. 10. Printer Names When naming a printer within the Hewlett-Packard Install Network Printer wizard you must enter a name in English that conforms to the Microsoft Printer Naming rules (i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name is required, assign the printer name in English and finish the install. Then open the printer folder from the Control Panel and select the desired printer. Select "Rename" from the File menu and rename the printer with a localized name. 11. Printer Share Name Spaces are not allowed for naming printer shared name. 12. Error Messages Error writing to for : The system cannot write to the specified file. This error message may appear when attempting to print a test page or during regular use. It usually means the printer is out of paper or unavailable. Check the printer and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard Install Network Printer wizard when this occurred, there is no need to rerun the application. Simply locate the printer in the printer folder and right mouse click on it. Choose "Properties" and select to print a test page. If you have corrected the error condition, a test page should now print. Driver cannot install. Must run printer's setup program. When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard Install Network Printer wizard may not be able to install the driver. You will receive an error message stating that you need to run the printer's setup program. The Hewlett-Packard Install Network Printer wizard may create the printer in the printer's folder despite this error. The installed printer will not function properly. After the wizard exits, run the setup program that comes with the printer. You may have to identify the printer as existing on a local port such as LPT1. Install the printer using this setup program. Now delete both printers from the printer folder (the printer created by the HP wizard and the printer created by the printer's setup program). Run the HP wizard a second time. This time choose existing drivers. You will see two similar printer strings. One will be from the first HP wizard install and one from the printer's setup install. Choose one. If the wizard exists successfully you chose the proper driver. If the installation fails, rerun the wizard and this time choose the other driver. Finally, check to make sure the printer created is the default printer. This can be accomplished by right mouse clicking on the printer in the printer's folder and seeing if "Set As Default" is checked. 13. Known Problems Installing HP Printer Drivers Under Windows 95/98 Some HP printer drivers do not install correctly using the printer .INF file and the
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer .INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
Hewlett-Packard Install Network Printer Wizard
.INF file and the
.INF file and the "Have Disk..." option. These drivers and the behaviors that they exhibit are listed below, along with directions to install these drivers properly.
v 02.00
Table of Contents
1. Overview
2. DHCP
3. DNS
4. IP Address Support
5. Suggest IP Address (Autonet)
6. NetWare Support
a. Supported Versions
b. NDS Multiple Tree Support
c. NetWare 5 Support
d. No Novell Print Path
e. No NDS volumes
f. Support for NDS localities
7. Device Discovery
a. Gateway
b. Multi-homed Machines
c. 0.0.0.0 IP Addresses
d. Class A Subnet Masks
8. Driver Support
a. License Acceptance
b. Have Disk Support
c. HP Driver Updates
9. IPX Port Monitor and Data Corruption
10. Printer Names
11. Printer Share Name
12. Error Messages
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
1. Overview
This Read Me file contains last-minute product information for the Hewlett-Packard
Install Network Printer wizard for Windows 95/ 98 and Windows NT.
2. DHCP
If you try to change just the subnet mask on an HP JetDirect print server that has
been configured via DHCP, you will get an error message while using the Hewlett-Packard
Install Network Printer wizard. Once a JetDirect print server has been manually
configured, it will store the IP address, subnet mask and default gateway statically
instead of trying to obtain them dynamically. Allowing a static change only to the
subnet mask would cause DHCP-configured IP conflicts in the future. For more information
on this subject, see the HP JetDirect documentation.
3. DNS
In a DNS environment, the Hewlett-Packard Install Network Printer wizard will
automatically set up the port with the host name rather than the IP address. If you have
a DNS environment that allows Host lookup by IP, but not the reverse lookup, the printer
will never print a page. We consider this environment to be an invalid DNS environment.
To fix the port without changing the DNS environment, view Properties for the printer.
Select the ports tab. Select the port that is in use for that printer. Click Configure
Port. Change the host name to the correct IP address.
4. IP Address Support
Hewlett-Packard Install Network Printer Wizard do not support class D IP address. Class D IP
addresses are those addresses with the form of 224.xx.yy.zz
All addresses of the form 127.xx.yy.zz are reserved for loopback testing. They are not valid IP
to be used to configure device on the network.
5. Suggest IP Address (Autonet)
The algorithm for obtaining the IP address for the "Suggest Settings..." button is
derived from the Internet Draft DHC-IPV4-AUTOCONFIG by R. Troll entitled "Automatically
Choosing an IP Address in an Ad-Hoc IPv4 Network". The algorithm for generating the IP
address is to randomly generate an address in the 169.254.x.x reserved address range,
then determine if it is in use on the network. If it is in use, generate another address
in the range. Repeat until an address is generated that is not in use. The resulting
address is not intended for use on the Internet. Microsoft uses a similar scheme for
determining an IP address on Windows 98 and Windows 2000 when the system is in an environment
that doesn't have a DHCP or bootp server, and the system is configured to dynamically
determine and IP address.
6. NetWare Support
a. Supported Versions
The supported versions of NetWare are: 3.11, 3.12, 3.2, 4.11, 4.2. For Novell
queue creation, you must be logged into a Novell bindery or NDS server using a Novell
supplied client requester. See www.novell.com for client updates.
b. NDS Multiple Tree Support
The Hewlett-Packard Install Network Printer wizard only provides support for the NDS
tree the user is currently logged into. If a different tree is desired you must quit
the application, change your login to the desired tree and rerun the application.
c. NetWare 5.0 Support
If NetWare 5 is configured for IPX, and an IPX connection is being used on the client,
the Hewlett-Packard Install Network Printer Wizard can be used to create an NDS print
queue. If NetWare 5 is configured for TCP/IP and a TCP/IP connection is being used on
the client, the Hewlett-Packard Install Network Printer wizard can be used to create
an IP print path. If the client on which the application is being run has an IPX
connection to the NetWare 5 server, and the client is logged in, an NDS queue server
print path will be recommended. If IPX is not in use but TCP/IP is, a TCP/IP print
path will be recommended. In order to create NDS queues, an IPX connection with a
login must be present.
d. No Novell Print Path
The Hewlett-Packard Install Network Printer wizard relies upon several DLLs that ship
with the Novell Client for 95 and NT. The application will look for these DLLs and
the associated entry points within them. If any of the necessary DLLs are missing,
or if they do not have the needed entry points (perhaps an old version), a Novell
print path will not be available although other supported print paths will be. If a
Novell print path is not available when you think one should be, try upgrading your
Novell client software to a newer version.
e. No NDS volumes shown in NetWare 4.11
There is a known problem reading the list of available NDS volumes in NetWare 4.11 with
service pack prior to version 7. This problem has been seen in cases were the user
logs into an NDS context that is at a lower level than the available volumes. The solution
is to install the NetWare 4 Support Pack 7 or upgrade to NetWare 4.2.
f. Support for NDS localities
The Hewlett-Packard Install Network Printer Wizard cannot recognize localities in the
NDS context.
7. Device Discovery
a. Gateway
Discovery performance will be very slow if your client PC does not have a gateway
configured. To configure a gateway, choose "Network" in the Control Panel, and then
look at Properties for the TCP/IP protocol. An input should appear for entering a
gateway address. See the online help for a more information on TCP/IP and gateways.
b. Multi-homed Machines
Multi-homed machines are not supported. In a multi-homed machine, it is not possible
to distinguish between multiple devices with the same IP address. A multi-homed
machine is a computer with more than one network connection. It is possible for two
or more devices on different networks to have the same IP address. A multi-homed
machine would see both devices and there would be no guarantee that you are
configuring the correct device. In this case, either disable all but the correct
network card, or configure the HP JetDirect print server from another PC that is on
the correct network and has only one network card. This problem may also occur on
PCs that contains both a network card and a dial-up adapter.
c. 0.0.0.0 IP Addresses
Assuming that an IP address is not assigned, a JetDirect-connected printer will have
an IP address of "0.0.0.0" for approximately 2 minutes after a factory reset. After
2 minutes the IP address will automatically be assigned "192.0.0.192". Attempts to
configure a "0.0.0.0" device through an IP print path will fail. You must wait until
the HP JetDirect device has a non-zero IP address before attempting to configure it.
d. Class A Subnet Masks
If the machine running the Hewlett-Packard Install Network Printer wizard has an IP
subnet mask of "255.0.0.0" (which is known as a "Class A" subnet mask), device
discovery will suffer a significant performance degradation. To improve discovery
performance you must change your subnet mask to a non-Class A subnet mask.
8. Driver Support
a. License Support
Some drivers require the acceptance of a license. When installing a driver, if a
dialog appears that requests acceptance of a license, you must approve the license
before the application will continue. Failure to approve the license will result in
the application hanging.
b. Have Disk Support
To support new printers or drivers, the "Have Disk" button can be utilized during
driver installation. For the "Have Disk" functionality to work, the media must
contain an "inf" file (e.g. filename.inf). Some driver updates available on the
World Wide Web are in the form of self-extracting archives and are not in a format
that "Have Disk" can utilize. In this case, install the driver before running the
Hewlett-Packard Install Network Printer wizard.
c. HP Driver Updates
Hewlett-Packard driver updates can be found on the World Wide Web at:
www.hp.com/go/support
NOTE: This URL is subject to change.
9. IPX Port Monitor and Data Corruption
Some printers may experience data corruption when used with the Hewlett-Packard IPX
Port monitor under Windows NT. These errors may be corrected either by installing an
appropriate hot fix for NT or by installing Service Pack 4 from Microsoft.
10. Printer Names
When naming a printer within the Hewlett-Packard Install Network Printer wizard you
must enter a name in English that conforms to the Microsoft Printer Naming rules
(i.e. what would be accepted in the Microsoft Add Printer wizard). If a localized name
is required, assign the printer name in English and finish the install. Then open the
printer folder from the Control Panel and select the desired printer. Select "Rename"
from the File menu and rename the printer with a localized name.
11. Printer Share Name
Spaces are not allowed for naming printer shared name.
12. Error Messages
Error writing to for : The system cannot write to the specified file.
This error message may appear when attempting to print a test page or during regular
use. It usually means the printer is out of paper or unavailable. Check the printer
and make sure it is plugged in, has paper, etc. If you were running the Hewlett-Packard
Install Network Printer wizard when this occurred, there is no need to rerun the
application. Simply locate the printer in the printer folder and right mouse click on
it. Choose "Properties" and select to print a test page. If you have corrected the
error condition, a test page should now print.
Driver cannot install. Must run printer's setup program.
When installing certain HP printers (see tables below under #11 and #12), the Hewlett-Packard
Install Network Printer wizard may not be able to install the driver. You will receive an
error message stating that you need to run the printer's setup program. The Hewlett-Packard
Install Network Printer wizard may create the printer in the printer's folder despite this error.
The installed printer will not function properly. After the wizard exits, run the setup
program that comes with the printer. You may have to identify the printer as existing on a
local port such as LPT1. Install the printer using this setup program. Now delete both
printers from the printer folder (the printer created by the HP wizard and the printer created
by the printer's setup program). Run the HP wizard a second time. This time choose existing
drivers. You will see two similar printer strings. One will be from the first HP wizard
install and one from the printer's setup install. Choose one. If the wizard exists
successfully you chose the proper driver. If the installation fails, rerun the wizard and
this time choose the other driver. Finally, check to make sure the printer created is the
default printer. This can be accomplished by right mouse clicking on the printer in the
printer's folder and seeing if "Set As Default" is checked.
13. Known Problems Installing HP Printer Drivers Under Windows 95/98
Some HP printer drivers do not install correctly using the printer
"Have Disk..." option. These drivers and the behaviors that they exhibit are listed
below, along with directions to install these drivers properly.
Printer Model: HP LaserJet 8100
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 8000
Behavior: PCL 6 driver will not install. The user will receive a "Spool 32" error.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP Mopier 320
Behavior: PCL 6 driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 6 driver.
Printer Model: HP LaserJet 4050
Behavior: PCL 5e driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the PCL 5e driver.
Printer Model: HP Color LaserJet 4500
Behavior: Postscript driver will not install. The user will receive an error message telling
them to run the setup program that came with this printer, and then to run the
printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the Postscript
driver.
Printer Model: HP DeskJet 2500C
Behavior: The DeskJet 2500C driver will not install. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 5M
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
The drivers for the HP LaserJet 5M can not be installed with the "Install Network
Printer Wizard." Please use JetAdmin or Web JetAdmin to install this printer and drivers.
Printer Model: HP Color LaserJet
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP). The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP Color LaserJet 5
Behavior: The following drivers will not install properly: HP Color LaserJet, HP Color LaserJet
5/5M (CLJ5FR), HP Color LaserJet 5/5M (HP), HP Color LaserJet 5/5M Postscript. The
user will receive an error message telling them to run the setup program that came
with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6P
Behavior: The following drivers will not install properly: PCL Standard, PCL Enhanced,
Postscript. The user will receive an error message telling them to run the setup
program that came with this printer, and then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP LaserJet 6L
Behavior: The PCL Standard will not install properly. The user will receive an error message
telling them to run the setup program that came with this printer, and then to run
the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP OfficeJet Pro 1170C
Behavior: The OfficeJet Pro 1170C driver will not install properly. The user will receive an
error message telling them to run the setup program that came with this printer, and
then to run the printer installer again.
Solution:
1. Run the file Setup.exe that came with the printer driver to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
Printer Model: HP DeskJet 1120
Behavior: There is a port monitor error right after installing the printer. The printer supplied
driver is not supported
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
2. Run the "Install Network Printer Wizard" to install the printer with the driver.
14. Known Problems Installing HP Printer Drivers Under Windows NT 4.0
Some HP printer drivers do not install correctly using the printer
Printer Model: HP LaserJet 8100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 6 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually.
Printer Model: HP LaserJet 5000
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 4050
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL 5 and PCL 6
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP LaserJet 2100
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 PCL and Poscript
client drivers.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 6L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5P
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5L
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 Postcript client
driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP Laser Jet 5
Behavior: Driver will not install. The user will receive an error message telling them to run
the setup program that came with this printer, and then to run the printer installer
again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP LaserJet 5Si Mopier
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 895C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 890
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 870
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP DeskJet 2000C
Behavior: Driver will not install. The user will receive an error message telling them
to run the setup program that came with this printer, and then to run the printer
installer again.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP DeskJet 2500C
Behavior: Windows NT 4.0 shared printers cannot install the Windows 95/98 client driver.
Solution:
1. Windows 95/98 client connecting to the Windows NT shared printer must install driver
manually
Printer Model: HP OfficeJet Pro 1170C
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Printer Model: HP CopyJet
Behavior: No inf file that describe printer drivers.
Solution:
1. Run the Setup.exe that came with the printer to install the driver.
Copyright 1999 Hewlett-Packard Co. All Rights Reserved.
Sung to the tune of "The Middle" by Jimmy Eat World.
Enjoy!
Hey, don't write that comment yet.
It's only on Slashdot you feel left out,
And looked down on.
Just troll your best.
Troll everything you can.
It doesn't matter if it's good enough,
For some A C.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
Hey, you know they're all the same.
You know you're doing better while logged in,
So don't A C.
Troll right now.
And just be an ass.
And don't you worry what the moderators
Are gonna say.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
(guitar solo)
(repeat first verse)
(repeat chorus)
u r teh sux
OUCH!
You dick! Why did you tell me to do that? That hurt!
Ok... Say it with me...
G to da mutha phukken oatse
C to da mutha phukken izzzzzzex
HellZ yeah, you know how it is bizznitch
[slashdot.org][slashdot.org]dumbass[slashdot . rg]
No, it's by Jimmy Eat World. Well, I wrote these words, though. I figured the CLIT needed a song. :)
Sung to the tune of "The Middle" by Jimmy Eat World.
Enjoy!
Hey, don't write that comment yet.
It's only on Slashdot you feel left out,
And looked down on.
Just troll your best.
Troll everything you can.
It doesn't matter if it's good enough,
For some A C.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
Hey, you know they're all the same.
You know you're doing better while logged in,
So don't A C.
Troll right now.
And just be an ass.
And don't you worry what the moderators
Are gonna say.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
(guitar solo)
(repeat first verse)
(repeat chorus)
This is to the tune of "The Middle" by Jimmy Eat World.
Hey, don't write that comment yet.
It's only on Slashdot you feel left out,
And looked down on.
Just troll your best.
Troll everything you can.
It doesn't matter if it's good enough,
For some A C.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
Hey, you know they're all the same.
You know you're doing better while logged in,
So don't A C.
Troll right now.
And just be an ass.
And don't you worry what the moderators
Are gonna say.
Just join the CLIT
(little troll you're in the shithole)
Fill the page with shit
(everything everything)
Goatse will do the trick
(everything everything)
Crapflood will do the trick
(guitar solo)
(repeat first verse)
(repeat chorus)
Sing it with me, CLIT!
G to da mutha phukken oatse
C to da mutha phukken izzzzzzex
HellZ yeah, you know how it is bizznitch
[slashdot.org][slashdot.org]dumbass[slashdot . rg]
u r stiil teh sux
usuck
n
Ok... Say it with me...
G to da mutha phukken oatse
C to da mutha phukken izzzzzzex
HellZ yeah, you know how it is bizznitch
[slashdot.org][slashdot.org]dumbass[slashdot . rg]
Posted by michael on Tuesday June 04, @12:51PM
from the top-down dept.
JCallery writes "CNN is reporting on the plan drawn up by ICANN's restructuring committee after ICANN decided to abandon direct elections." We had a earlier story about the restructuring plan with some notes from one of the board members who attended. ICANN's plan is online and a must-read for anyone interested in internet governance issues. Below, I have some notes about why this restructuring would be terrible idea for regular internet users.
If you've followed the history of ICANN at all, you know that it was originally set up to have substantial representation from the general public (known as At-Large representatives) - 9 of 18 board members. The original unelected board immediately set about undermining that, only electing 5 members and keeping on four "board-squatters" from the original unelected bunch.
The elections of the five At-Large members had two flaws from the point of view of ICANN's unelected board:
There were assorted technical issues with the voting process, due apparently to incompetence from the contractor who handled it.
Two of the five new board members who were elected did not represent the same corporate interests as the rest of the board.
Of these two flaws, the second was by far the more severe. The board risked losing control of ICANN to people who might run it for the public good rather than for the good of the corporations represented on the board. They started backing away from having any sort of elected representation whatsoever. In February 2002 ICANN President Lynn floated a reform proposal which would eliminate the At-Large representation - or rather, it would keep something called "At-Large", that would no longer be elected by the general public but instead appointed by the Board itself. Instead of the general public picking new ICANN Board members, the ICANN Board would pick new ICANN Board members. This was followed by a vote which confirmed ICANN's commitment to eliminating elected representation.
Now the reform proposal is out. There would be two classes of board members:
approximately eight ex-officio members (members holding the board seat due to some other title or position they hold)
approximately five to eleven members picked by a Nominating Committee (the Committee to be chosen by the current Board) and perhaps confirmed by the Board
It is important to note how thoroughly captured this process is. Many of the ex-officio seats accrue from positions that are selected by the ICANN Board. So the ICANN Board picks someone to be chief dogwalker, and the chief dogwalker gets an automatic position on ICANN's Board.
The seats selected by the Nominating Committee are also extremely vulnerable to capture. Let me use a real-life example of how nominating committees work to show what I mean: my credit union.
My credit union has a board structure very similar to the one proposed for ICANN: several ex-officio members, and a number of seats elected by the general populace (everyone who has an account at the credit union). This structure is actually more flexible than that proposed for ICANN, since ICANN does not plan any direct elections at all. However, the credit union membership picks from among candidates selected by a Nominating Committee. Every year or two, I get a ballot in the mail. I can choose from among all the candidates selected by the Nominating Committee, and I can check boxes for the candidates that I prefer, up to the number of open seats available on the Board.
I never return these ballots. Why, you might ask? Because the number of candidates is usually identical to the number of open seats. Three empty seats, three candidates to choose from. Six empty seats, six candidates to choose from. I think one year they might have had more candidates than open seats, but it was an aberration.
This system apparently works well for credit unions: would you believe that they pay interest on my checking account? What it does guarantee is that all future Board members will represent the same biases that are present in the Board at the instant the system was instituted. In my credit union's case, this guarantees "fiscal responsibility" or "fiscal conservatism".
For ICANN, what it would do is institutionalize the biases currently present. Whatever biases are there right now, will be there forever, as the system becomes a self-reinforcing feedback loop with no external controls.
The Board's current biases are toward:
expanding ICANN's mission from a purely technical body to one that is willing to govern the Internet - taking on assorted social/political issues as it sees fit
running ICANN for private profit rather than public benefit
Neither of these two traits needs reinforcing. Karl Auerbach, one of ICANN's At-Large directors, has his thoughts on a possible ICANN structure.
I could even host it. And no, not on a fucking Linux box. I use a real OS unlike the /. sellouts: FreeBSD. :)
Posted by michael on Tuesday June 04, @12:51PM
from the top-down dept.
JCallery writes "CNN is reporting on the plan drawn up by ICANN's restructuring committee after ICANN decided to abandon direct elections." We had a earlier story about the restructuring plan with some notes from one of the board members who attended. ICANN's plan is online and a must-read for anyone interested in internet governance issues. Below, I have some notes about why this restructuring would be terrible idea for regular internet users.
If you've followed the history of ICANN at all, you know that it was originally set up to have substantial representation from the general public (known as At-Large representatives) - 9 of 18 board members. The original unelected board immediately set about undermining that, only electing 5 members and keeping on four "board-squatters" from the original unelected bunch.
The elections of the five At-Large members had two flaws from the point of view of ICANN's unelected board:
There were assorted technical issues with the voting process, due apparently to incompetence from the contractor who handled it.
Two of the five new board members who were elected did not represent the same corporate interests as the rest of the board.
Of these two flaws, the second was by far the more severe. The board risked losing control of ICANN to people who might run it for the public good rather than for the good of the corporations represented on the board. They started backing away from having any sort of elected representation whatsoever. In February 2002 ICANN President Lynn floated a reform proposal which would eliminate the At-Large representation - or rather, it would keep something called "At-Large", that would no longer be elected by the general public but instead appointed by the Board itself. Instead of the general public picking new ICANN Board members, the ICANN Board would pick new ICANN Board members. This was followed by a vote which confirmed ICANN's commitment to eliminating elected representation.
Now the reform proposal is out. There would be two classes of board members:
approximately eight ex-officio members (members holding the board seat due to some other title or position they hold)
approximately five to eleven members picked by a Nominating Committee (the Committee to be chosen by the current Board) and perhaps confirmed by the Board
It is important to note how thoroughly captured this process is. Many of the ex-officio seats accrue from positions that are selected by the ICANN Board. So the ICANN Board picks someone to be chief dogwalker, and the chief dogwalker gets an automatic position on ICANN's Board.
The seats selected by the Nominating Committee are also extremely vulnerable to capture. Let me use a real-life example of how nominating committees work to show what I mean: my credit union.
My credit union has a board structure very similar to the one proposed for ICANN: several ex-officio members, and a number of seats elected by the general populace (everyone who has an account at the credit union). This structure is actually more flexible than that proposed for ICANN, since ICANN does not plan any direct elections at all. However, the credit union membership picks from among candidates selected by a Nominating Committee. Every year or two, I get a ballot in the mail. I can choose from among all the candidates selected by the Nominating Committee, and I can check boxes for the candidates that I prefer, up to the number of open seats available on the Board.
I never return these ballots. Why, you might ask? Because the number of candidates is usually identical to the number of open seats. Three empty seats, three candidates to choose from. Six empty seats, six candidates to choose from. I think one year they might have had more candidates than open seats, but it was an aberration.
This system apparently works well for credit unions: would you believe that they pay interest on my checking account? What it does guarantee is that all future Board members will represent the same biases that are present in the Board at the instant the system was instituted. In my credit union's case, this guarantees "fiscal responsibility" or "fiscal conservatism".
For ICANN, what it would do is institutionalize the biases currently present. Whatever biases are there right now, will be there forever, as the system becomes a self-reinforcing feedback loop with no external controls.
The Board's current biases are toward:
expanding ICANN's mission from a purely technical body to one that is willing to govern the Internet - taking on assorted social/political issues as it sees fit
running ICANN for private profit rather than public benefit
Neither of these two traits needs reinforcing. Karl Auerbach, one of ICANN's At-Large directors, has his thoughts on a possible ICANN structure.
u r teh sux
I Agree With This Post
Posted by timothy on Tuesday June 04, @12:04PM from the at-least-get-rid-of-the-income-tax dept. tekan writes: "The National Review has an interesting article about the challenges ahead for the settlement of Mars (or the Moon), as well as how Law and sovereignty issues factor into colonizing these bodies." Perhaps most interesting are the reasons cited for entering into the treaty at all -- which had little to do with keeping space a peaceful utopia. ( Read More... | 56 comments ) U.S. Asked to Put Purchasing Power to Good Use Posted by michael on Tuesday June 04, @11:15AM from the power-of-the-purse dept. James Love writes "Today Ralph Nader and I wrote U.S. Office of Management and Budget Director Mitch Daniels to ask the federal government to use its power as a big consumer to address competition issues in the market for PC client software. These are some of the practices we want OMB to examine: OMB is asked to provide information on federal expenditures for Microsoft products, determine if a software "monoculture" makes the federal government more vulnerable to computer viruses or unauthorized access to federal computers, and to consider a number of strategies to use the US government's purchasing power to promote competition and make Microsoft behave; OMB is asked to consider if Microsoft should be required (as a matter of procurement policy) to fully disclose the file formats of its office productivity and multimedia programs, so that the data created in such programs could be reliably read by non-Microsoft software; OMB is asked to consider if it should place a cap of the market share for any one vendor of PC client software, and have the size of the cap depend upon Microsoft's willingness to open up its interface information, or port its MS Office products to additional platforms; OMB is also asked to consider if it would be more efficient to buy code for office productivity products (and release into the public domain), rather than spend billions to lease software." ( Read More... | 221 comments ) Features: Amazon.Heartbreak Posted by JonKatz on Tuesday June 04, @10:15AM from the inside-the-cult-of-Bezos dept. Ex-Amazon.com wage slave Mike Daisey asks in one fantasy e-mail to his then-boss Jeff Bezos: "Would it have been so hard to build a cool and quirky bookstore instead of a soulless virtual megamall? You were afraid: afraid to define the company, afraid the stock would drop, afraid not to feed the monster. What you sacrifice reveals what you value, and you're a fool if you think the world will forgive you in the end." Prescient stuff. 21 Dog Years: Doing Time @ Amazon.com, Daisey's hilarious, heartbreaking and surprisingly powerful recounting of life inside what may be the world's strangest, most ephemeral company -- a symbol of all that was exciting, misguided, and ultimately misunderstood about business online during the mad years. It's also one of the best books ever written about the Net, an unsparing, even brutal indictment not only of hubris, but of media and, of course, the corporate-spawned hype that shapes so much of American life. ( Read More... | 10276 bytes in body | 254 comments | Features ) Developers: Unofficial GBA SDK Available for Free Posted by CmdrTaco on Tuesday June 04, @09:22AM from the time-for-me-to-design-super-final-zelda-bros. dept. BlackGriffen writes "Anyone who is interested in making their own Gameboy Advance ROMs can go get an unofficial GBA SDK . With this and a flash ROM kit from someplace like lan-kwei.com, we could see a flourishing indie game making community. Available for Linux and Mac OS X only (for now, it's open source)." ( Read More... | 106 comments | Developers ) Apple: QuickTime 6 Public Beta Available Posted by pudge on Tuesday June 04, @08:29AM from the i-got-yer-royalty-fee-right-here dept. krugdm writes "Apple has announced that a public beta of QuickTime 6 is now available. MPEG-4 support is there, as well as support for other technologies, such as JPEG2000, and Flash 5. The beta expires in October. An interesting in the FAQ's says that, '... because QuickTime 6 will include royalty-bearing technologies, a new QuickTime Pro key will be required to unlock pro functionality in the final release.'" It is available for Mac OS, Mac OS X, and Windows, and supports AAC audio too. I also wonder why MPEG-4 is ".mp4". ".mp3" isn't for MPEG-3, after all. Flummery! ( Read More... | 313 comments | Apple ) SuSE Denies UnitedLinux Per-Seat License Model Posted by CmdrTaco on Tuesday June 04, @07:47AM from the plot-thickens dept. m0RpHeus writes "According to Linux Today, SuSE is denying per seat licensing for United Linux. `We really don't plan any per-seat licensing for UnitedLinux,' said SuSE's US Director of Sales Holger Dyroff. UnitedLinux, it seems is divided on this issue." ( Read More... | 155 comments ) Verisign Offers Wiretapping Services Posted by michael on Tuesday June 04, @06:50AM from the suddenly-there-came-a-tapping dept. LinuxDeckard writes "According to this article at FindLaw, VeriSign will soon be offering its 'NetDiscovery' wire tapping services for a monthly fee. NetDiscovery will allow Telecoms to comply with court ordered wire taps." Verisign's press release is informative. This appears to be tapping of voice calls rather than internet usage. I assume it would work something like this: telecom company gets a wiretap notification from the FBI or local police; it routes all calls to/from $TARGET through a Verisign switch; Verisign does the tapping and reporting to the tappers. If you think this doesn't affect you, keep in mind that under the PATRIOT Act the barrier for wiretapping is set very low indeed. ( Read More... | 148 comments ) IBM Spins Down Posted by michael on Tuesday June 04, @05:58AM from the hdparm-Y dept. beggs writes "IBM and Hitachi have signed an agreement which will take IBM out of the hard drive market in three years. This press release on IBM's web site gives some details of the deal. 18,000 IBM employees and all their hard drive related patents will join about 6,000 Hitachi employees to form a new company that will be a subsidiary of Hitachi. Sad to see big blue out of the hard drive business, they have made a lot of contributions to computing." We did a story when they announced their plans back in April. ( Read More... | 171 comments ) ReplayTV 4500: No Hacking, or Else Posted by michael on Tuesday June 04, @03:10AM from the stuff-to-avoid dept. mcglk writes "I was happy to see that SonicBlue had released its new generation of ReplayTV, the 4500. And it was $250 cheaper than the 4000. Except for that $250 "one-time service activation fee." Worse is the agreement that goes along with it. Term 1A basically says, "No more hacking." Term 1G says that they can enable or disable anything they want without notice. And Term 2C says that if someone even alleges you are infringing on copyright, you can be shut down with no notice, no recourse, and there's nothing you can do about it--the agreement indemnifies them completely. I was really looking forward to getting one of these, too." Under that agreement, SonicBlue claims the right to destroy your device when you connect for updates. ( Read More... | 271 comments ) Taiwan to Start National Push For Free Software Posted by timothy on Tuesday June 04, @12:28AM from the makes-good-sense dept. Andy Tai writes: "Taiwan will start a national plan to jump-start the development and use of Free (libre) Software, according to this report by the Central News Agency, the government news agency of Taiwan, Rep. of China. Due to high Microsoft license fees and also to improve the levels of software technology in Taiwan, this plan includes the creation of a totally Chinese free software environment for Taiwan users, free software application development, and training of 120,000 people for free software skills, as well as efforts at schools to provide diverse information technology environments to ensure the freedom of information. The original article is in Chinese; an English summary appears in this Kuro5hin article." ( Read More... | 242 comments ) Rockbox Replaces Archos Firmware Posted by timothy on Monday June 03, @09:22PM from the but-that's-unpossible dept. bagder writes: "The guys in the Rockbox project have just released the first working firmware replacement for the Archos portable hard disk-based MP3-players. The software is all GPL. Every tiny bit was reverse engineered, disassembled and then re-written from scratch. You can go download your own firmware right now!" ( Read More... | 170 comments )