Slashdot Mirror

I bet you're actually thinking of SiS, since MSI never designed any chipsets themselves and are purely manufacturers.

I rather have more driver hardware support from vendors in Linux first. Apps will follow soon after.

I rather have more driver hardware support from vendors in Linux first. Apps will follow soon after.

Do you write to them and tell them that? Here are some addresses, write to one or two:

Creative (Webcams) http://asia.creative.com/contactus/presales/

Logitech (Webcams) http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/ask.php

Lexmark (Printers) http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596_689444666_0_en,00.html

Nokia (PIM sync software with OpenSync) http://www.nokia.com/A4126575

Epson (Printers) http://www.epson.com/cgi-bin/Store/AboutContactUs.jsp?BV_UseBVCookie=yes

Gigabyte (New motherboards should ship with Linux drivers) http://www.gigabyte.com.tw/Company/ContactUs.aspx?CompanyWebPageID=6

Linksys (Networking equipment) http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1114037291276&pagename=Linksys%2FCommon%2FVisitorWrapper

SIS http://www.sis.com/support/support_tech.htm

ASUS http://usa.asus.com/aboutasus.aspx?show=3

Which brand is your card? What type of card, by the way, NIC?

Of course to top it all off Intel claims that all of its bus technology is "proprietary", this is why nVidia hasn't made an nForce chipset for the P4 yet. AMD on the other hand has a much more open policy and actively encourages 3rd party motherboard and chipset makers. A policy which has worked very well for AMD to date.

Here are some current examples:
ATI RADEON 9100 PRO IGP
SiS SiS648FX
VIA PT800
ALi M1681

I don't know why NVIDIA doesn't make nForce chipsets for the P4. Maybe NVIDIA doesn't want to compete with Intel in making chipsets

If you talk to your PC's chipset then I rather think that you may have some problems of your own...

In the last month and a half, I've literally received about 2 gigabytes of virus/worm mail in my UNIX-based mailbox. (Actually, it's an AIX box at my ISP.)

Anyway, I noticed that most of these come from a rather small set of "From:" addresses, and my (now cancelled) email address, im14u2c@primenet.com, was one of them. Did any of you receive large quantities of email wastage with that forged "From:" address?

Here's a short list of forged From: addresses I saw repeatedly on these virus/worm spam, in decreasing order of occurrence:

• im14u2c@primenet.com
• ollie@sis.com.tw
• lcs@sis.com.tw LI>jgarzik@mandrakesoft.com
• cmhuang@sis.com.tw
• lcchang@sis.com.tw
• lola@sexnet.com
• abuse@gov.us
• support@symantec.com

I noticed sis.com.tw got hit pretty hard, as did Jeff Garzik! I think they must've scraped these out of the SiS900 driver in the Linux kernel.

I'm regretting that suggestion I made to Ollie on how to speed up his CRC routine.

Don't think so troll

Honestly, why do you even bother posting.

STFU :)

You simply have to hand it to a company whose latest financial report has the words Zeon PDF Driver Trial emblazoned across every page.

Motorola makes a couple of PowerPC based microcontrollers. These come with a number of usefull peripherals (USB endpoints, ethernet interfaces, serial ports, parallel I/O ports, etc.), some RAM and some EPROM all on a single chip. In decades past, Steve Ciarcia built a small publishing empire on the practice of building homebrew personal computers on similar microcontrollers (Z80 variants, in his case). The same approach could be used today. If you don't want to use a PowerPC, there are similar beasts available based on other popular architectures.

http://www.sis.com/support/driver/630lan.htm

It was a incomplete comparison

It really should have been a VIA KT266 vs VIA KT266A vs NVidia NForce vs AMD 760 vs SIS 735 vs SIS 745 vs ALI MAGiK 1 / M1647 (both revisions)
comparison.

It was a incomplete comparison

It really should have been a VIA KT266 vs VIA KT266A vs NVidia NForce vs AMD 760 vs SIS 735 vs SIS 745 vs ALI MAGiK 1 / M1647 (both revisions)
comparison.

It amazes me the amount of 'software' guys who think they're experts but have no idea when it comes to hardware.

Check these examples out:-

- "Do get a pure PCI-bus machine (not a hybrid PCI/ISA design, you sacrifice about 10% of peak performance with those)."

This is pure humbug - you do not get 10% greater performance by buying a motherboard that has ni ISA slots (like those Asus KT boards). Because the fact is that even if they have no ISA slots, they still have a ISA bus built in the southbridge to support legacy stuff like the printer/parrallel port, the serial port/s & the PS2 mouse & keyboard ports. Now as far as the USB ports are concerned, I'm not sure whether they use the ISA bus or the PCI bus.

- "For the power supply, the three of us easily agreed on a vendor: PC Power & Cooling"

Bloody typical. Yet the reality is that the PC Power & Cooling mob are just 'badge engineers' - they re-sell other manufacturers products with their own own brand markings & inflated prices.

For example their full tower case is just a California PC full tower case with a custom bezel on the front.

Now as far as their power supplies are concerned. I remember when they used to sell a 'Silencer' model 275 watt power supply. In fact all it was was a generic 300 watt power supply, de-rated down to 275 watts so it was understressed, so it would cope with retro-actively fitted low speed 'silencer' fan.

As far as powersupplies are concerned I recommend the Enermax 350 watt EG365P-VE(FC) or 450 watt EG465P-VE(FC) power supplies. They have a push/pull dual fan design (a 80mm exhaust fan at the back & a 92mm intake fan at the bottom), which means the fans can run at a much slower (therefore quieter) speed, without losing any cooling performance. The Powersupply comes with a standard motherboard 3 pin senser connector cable, so you can blug it into a spare motherboard fan header, which means ifyou can see what revs one of the power supply fans are running at in you PC monitor applet in you system tray (& it can warn you with an alarm if it fails). Also the powersupply comes with a thermastat on a connector which can be somehow attached to the heatsink or against the CPU core if its a exposed flip-chip type core (as long as it has no heatspreader like the AMD K6 series has), this controls the fan underneath the powersupply & it only runs when necessary. Consequently these power supplies are so bloody quiet you sometimes think its not running.

- They also recommend the Thunder K7 (S2462) Motherboard, which is a huge waste of money as you can buy a very similar motherboard made by the same manufaturer at a much cheaper price (the Tiger MP (S2460) Motherboard). Also the 'Tiger' has a standard ATX connector, rather than the propietry connector that the 'Thunder' has. Which means you can use normal ATX powersupplies, rather than the inflated priced propietry powersupply that the 'Thunder' uses.

- Also, even though this is s'pose to be a 'Ultimate Linux Box', they fail to mention that both IDE floppy drives(if you are using the IDE bus) & SCSI floppy drives (if you are using a SCSI BUS) are avaliable. Even better one can get the LS120 variety which are compatible with both 120MB 'SupperFloppies' & standard 1.4MB standard floppies.

- They spend 4 paragraphs talking about 'Noise Control and Heat Dissipation' without really saying anything. When all they really needed to say that it's best using bigger fans at slower speeds - such as 12 volt 120mm fans running at 7 volts (positive hooked up to the 12 volt line while the negative is hooked up to the 5 volt line). The quietist fans (all other things being equal) by brand are the Papst Simtec bearing fans, the Sanyo Denki fans & the L1A1 versions of the Panaflo fans.

- They recommend a pretty well generic (though above average) Antec case, but this is s'pose to be a ultimate Linux box.

Therfore I recommend the Addtronics 'Server Cases' (their full tower cases) - the 7890 & the 7896. They are great cases with their great cooling options, filtered intakes, butterfly doors & slide out 'mainboard & I/O backplane tray'. Supermicro sell their own badge engineered version of this full tower case.

Other good full tower cases are the all alloy ones made by Lian Li. Such as the Lian Li PC-70 aluminium full tower computer case & the Lian Li PC-76 server case

If a mid tower case is more your style, both Lian Li & Coolermaster maker great alloy ones. They are great for LAN parties. In this regard I recommend the Lian Li PC-60 computer case & the Coolermaster ATC-201SX. Both cases are unbeatable as mid-tower cases - they have everything. I Personally thing a midtower case must have 4 5.25inch drive bays; so you can have both a CD burner & DVD drive, plus 2 HDDs in removable HDD pullout caddies.

For a ultimate box it should have the all alloy (better heat dissapation) twin fan caddies that agains are made by Lian Li. The 3 best models appear to be the RH-620 , the RH-600 , & the RH-29

For the motherboard, I'd recommend one with the SIS 735 'chipset'. Preferably it would have a AGP Pro slot, 6 PCI slots, one shared with a ISA slot at the bottom. It would have BOTH 2 DDR slots & 2 normal SDRAM slots. It would have a integrated RJ45 network connector above the 2 rear USB ports, plus integrated 'hardware' 5.1 sound (IWill have brought out a couple of boards of late with integrated 'hardware' 5.1 sound, they have the 3 standard female jack ports under the midi 'D' plug at the back, plus the extra connects hook up via a ribbon cable & a slot backplane cover). The board would also have integrated SCSI & Firewire like some of the MSI Pro or Turbo or whatever boards have. Plus an extra IDE controller (Promise, Highpoint, etc) so there's the potential for 8 drives (HDD, CD, DVD, LS120, ORB, etc) rather than the standard 4. The extra IDE controller will also have RAID 0,1 & 1+0 options (most have this built in, though its sometimes disabled). All the integrated stuff must have the capability to be disabled, either via jumpers or in the BIOS.

Twin AthonXP/MP CPUs would be the go (the XPs work fine in SMP setups, they just are not certified/supported for such configurations - that's the main difference between the XP & MP, the MPs are certified/supported for SMP use.

That's enough raving for now.