Slashdot Mirror

← Back to Stories (view on slashdot.org)

Maxtor's ATA-133 Does 160GB

Posted by CmdrTaco on from the 160-scoops-of-yum dept.

B. Galliart writes "ExtremeTech has an article about Maxtor's two new bleeding edge ATA-133 drive models coming out later this month. The most interesting of these is the 160 Gigabyte DiamondMax Plus D540X (priced around $400) which uses Maxtor's purposed "BigDrive" 48-bit address space instead of the common E/IDE 28-bit address space thus getting pass the 137GB barrier. The drive should be useable on existing computers due to a bundled Promise Technologies ATA-133 PCI card."

7 of 221 comments (clear)

  1. It's the rotation speed that counts by Drashcan · · Score: 5, Informative

    For most of the applications the rotation speed is more important than the ATA standard. This determines the access time.
    I prefer an ATA-66 @ 7200 rpm above an ATA-100 @ 5400

    --
    The nice thing about Windows is: it does not just crash; it displays a nice little dialog box and let's you press 'OK'
    1. Re:It's the rotation speed that counts by raynet · · Score: 4, Informative

      High rotation speed might also be bad. I've noticed that none of my 5400 rpm hdd have crashed (IBM Deskstars and Maxtors) but my 3 IBM Deskstars running at 7200 rpms have all crashed, mostly on spin-up problems.

      --
      - Raynet --> .
    2. Re:It's the rotation speed that counts by Jeff+Probst · · Score: 4, Informative

      it is not the rotation speed that counts. rotation speed accounts for access time, but nothing more.
      cluster density is another kettle of fish, if a drive can pack twice the amount of information in half the space, you should get twice the sustained transfer rate, all things being equal.
      speed is access time.

    3. Re:It's the rotation speed that counts by ostiguy · · Score: 4, Informative

      7200 rpm is not high rotation speed - 10k rpm scsi drives are in there 3rd generation, and a few 15k rpm drives have been out for a few months now. The IBM 60gxp series is simply dead in the water, read the forums at www.storagereview.com for more info.

      ostiguy

  2. Re:Great turnaround by chill · · Score: 4, Informative

    ATAPI still has a limit of 2 devices (master/slave) per controller. Ultra-SCSI is 15, not including LUNs.

    ATAPI devices are still limited to hard drives and CD-ROMs (via a hack). SCSI handles scanners, tape drives and other devices as well -- it is much more generic.

    ATAPI still causes performance degredation when you are accessing the master and slave on the same channel at the same time. SCSI does not.

    --
    Learning HOW to think is more important than learning WHAT to think.
  3. Re:CPRM and SSSCA by RelliK · · Score: 4, Informative

    How quickly do we forget that CPRM proposal was defeated and Maxtor was one of the high-profile companies to vote against it. IBM, Microsoft, Iomega and others wanted to push it through.

    --
    ___
    If you think big enough, you'll never have to do it.
  4. "Maxtor Big Drive" = ATA/ATAPI-6 by Otto · · Score: 4, Informative

    Maxtor's so called Big Drive technology is no more than an implementation of the spec. ATA/ATAPI-6 specifies a 48 bit address scheme, giving a new upper limit of 2^48*512 bytes, or 128 petabytes.

    Also, the limitation is not 137 GB, it's 128 GB. And Maxtor's new drives are not 160 GB, they're slightly more than 149 GB. These mistakes are what happen when you start believing "drive manufacturer math".

    --
    - Give a man a fire and he's warm for a day, but set him on fire and he's warm for the rest of his life.