Slashdot Mirror
ATX PPC Motherboards from Eyetech
YttriumOx writes: "Eyetech Ltd, a UK based company now has the AmigaOneG3SE for prerelease to developers.
Anyone who's been craving a PPC motherboard for either Linux or the New AmigaOS can put their orders in now. The developers prerelease board comes with a TurboLinux PPC CD. While this system is targetted at Amiga owners wanting new hardware, there's no reason for anyone needing a good PPC solution for Linux can't get their hands on one. You've got until the 24th of March if you want a prerelease board (note that the only difference between it and the final board is that the ROM chip in the final board will be an AmigaOS4 ROM where as it's an OpenPPC BIOS in the developers board. Exact specifications of the board can be found here."
This is also a good solution for people who want to use Linux on a PowerPC but do not want to buy an Apple machine. Price for the "beta" board is $450 and final will be $500.
You could probably get MacOS X to boot on it, now that the OS's rom is stored on disk.
That, and Darwin comes with source, so you could likely get it going on the hardware.
This will be kinda cool....
God save our Queen, and Heaven bless The Maple Leaf Forever!
I'd be interested to know whether or not it will run Mac OS X. On one hand, Apple built into their operating system a list of computers that it can run on. They did this so non-G3 users wouldn't try to do an install.
1 68&db=mac. Although it's not the one I used, you can see that as an example.
On the other hand, there are several utilities available that override Apple's settings. I've personally used one to get OS X running on my Power Mac 7300. One such utility is XPostFact, http://www.versiontracker.com/moreinfo.fcgi?id=11
Does anybody with more knowledge than me have any insight?
I want one, just to have a home server that is not x86, is this board really for real???
Depending on what type of server and how heavy of use it's going to be getting, then why bother with a $600 motherboard that you just have to buy more parts for anyways? If you're willing to do a little messing around, just get an old PowerMac for cheap (make sure it's at least a 2nd generation PowerMac as anything before doesn't have PCI, and try to avoid those with the 601 processor, especially the 7200.)
Although it's not quite the same thing that you want to use it for, my router is a PowerMac 7600/132 (604 processor at 132MHz, 92MB of RAM) which was purchased for ~30 USD (+ shipping). As of this post it's been running for 32 days, 7 hours and 24 minutes without any sort of problems.
Only possible problems are the hardware quirks, but NetBSD has a good model support page detailing most of them for anyone who wishes to run any *nix, and the fact that if there isn't enough storage space then you may have to pay a bit for it depending on whether or not the drives are SCSI or IDE. But, with PPC you tend to pay a bit more for the hardware anyways...
Either way, PenguinPPC is a good place to check out info on Linux on the PPC architecture. (And for old Mac owners, MkLinux is a good place to check for solutions to problems that may be missing from the documentation of your chosen distro (*cough*Debian*cough*) )
"I won't mod you down - I feel the need to call you a twit explicitly, rather than by implication."
This made me react weidly.
/. users hate microsoft :), I want a technical explanation of that ram issue before trusting my money into a system that "could" have a "potential" of bad design or architecture limitation, and I wouldn't tolerate "don't worry, everything is fine and that's normal" for an explanation. I'd rather hear "look, implementing DDR ram would only give a 5% boost and cost too much of R&D than hearing BS. Still, I am aware that honnesty doesn't drive the computer industry but I can always wish :)
I quote:
---
Memory speed concerns The AmigaOneG3-SE supports 133MHz FSB SDRAM. (According to our engineers DDR memory doesn't gain anything in help PPC board design).
----
Now, I didn't mess deeply with powerPC chips or any architecture, my last CPUs from motorola were the 68040 series on my amiga 2000 (with fusion forthy) and 4000, but unless the memory controller has some sort of on-die SRAM for caching, I don't see why faster than 133mhz memory, especially with 600+mhz CPU, wouldn't help. Anyone care to explain the technicalities?
A comment like that without technical backup would probably make most technical people tend to think "oook... if that comes from the engineer that designed the board, I should stay away from getting this"
Of course I don't want to bash, I "worship" the amiga cause more than most
--- Metamoderating abusive downgraders since my 300th post.
You are all (mostly) missing the point. The board is designed foremost to run AmigaOS4. Linux is supported only as an aide to development while OS4 is being finished. Why run Amiga OS? I don't know. :) I love it...it's a sweet, responsive operating system that I've used for over 10 years. It lacks some modern OS features but it is still viable and performs well. It has a small footprint.....I have one 880K disk with the OS, a TCP/IP stack and an IRC client on it that will run on a 1 meg Amiga 500 with motorola 68000 7mhz cpu. We crazy, fanatical amigans have been waiting for nearly a decade for a new amiga. Many thought it would never come. It may not be practical but it's an Amiga. :) Jay Miner was a genious.
I remember the name of the IBM platform now... PReP. In case anyone cares...
Seriously, this is a bit of a milestone. All the independant PPC boards have been around the $2,500 mark. The only way to get a cheaper one until now was to buy an Apple Mac and bin all the bits you don't want.
Deleted