Slashdot Mirror
13.8MP Kodak Tops Previously Leaked Canon
MadCow42 writes "With the professional imaging trade show Photokina opening this week in Koln Germany, digital camera manufacturers are announcing a stunning new lineup of professional digital cameras. These include a 13.8 megapixel monster from Kodak, and a 11.1 megapixel camera from Canon. I'm sure Nikon isn't too far behind, but no news yet on their offerings. These cameras are positioned for the professional photographer, but with list prices from under $4k to $6k, they're not out of reach for the 'pro-sumer' market either. The best news is that new products like this will push prices down on the 4-6MP cameras at the high end of the consumer level." We mentioned the premature release giving Canon's hand away; like MadCow42, I want to see what Nikon has to say.
Well, Epson says that a high quality color inkjet prints at 1440x720 dpi (they have some at double that...)
Let's say you ignore that and print at 300 dpi. That's 2400 by 3000 pixels. There's 7.2 MP.
The Canon D1s uses a CMOS sensor (not CCD), which results in very low noise. This sensor type has a far lower noise floor then film or CCD. Although CCDs from Kodak and Nikon out-pixel-count the D30/D60/D1s, I would take a 'lowly' D60 any day of the week, simply because it has a pure color ramp with no noise, and all the resolution you would ever need, unless your printing multi-foot-wide prints.
As an aside, the new D1s is also full frame, meaning you do not have to multiply your lenses by a certain factor in order to get correct results.
Here is a very detailed article comparing Film vs. Digital
This might be better than some 35mm films, especially at the higher ISO ratings.
Of course, it may be easier to get larger film than a larger sensor...
Check out some pictures of the new Kodak at dpreview. It looks pretty nice. I like big cameras that fill my hands, have a nice solid feel, and weigh a few pounds.
Of course my dream camera is 4-6 megapixel SLR that has a full-35mm-size *interchangeable* sensor (in case I want to upgrade to more pixels), low noise, good color, and takes EOS lenses. All for $500 or less. Just a few more years....
for anyone in the market for a digital camera. Unless you a serious photographer a 2.1MP with a good zoomable optical lens will work fine for most people. Having 3MP can't hurt, but anything beyond that is overkill(financially) for most people.
Ask yourself this. How many 8x10 photos have you made and kept in the past few years? If your like the average consumer and do 4x6's and 5x8 's a good 2.1MP will do you well.
Plus keep in mind that A) you will need a high speed connection if you want to upload your photos to an online printer. My father realized that after buying a 3MP and trying to upload a roll of 30 via a 56k line which as we all know only does 33.6 up. Also realize that B) printing your own photos is very expensive and between the ink and paper really burn money.
So while its all good and well that these higher MP camera are coming out, the cost of the camera can really sometime be minimal over the other expenses you may incur.
If you wanna get rich, you know that payback is a bitch
It turns out that the D1X (and D1H and F5, etc) will all meter with any AI lens made. 105/1.8 is a lovely portrait lens, for example.
My F100 will also do this. You have to use spot metering, but what else would a Real Man use, anyhow?
Anyways, the point is that you don't know (enough about) what you're talking about.
AI lenses were first produced about 25 years ago, so at least on that count, you're quite right that an unmodified 30-year-old Nikkor won't be real useful. Of course, if it's a long telephoto, it might be worth converting anyways. Not everyone is a staff photographer for a newspaper with a good lens pool.
Remember that what's inside of you doesn't matter because nobody can see it.
Digital backs like this, this and this have been available for medium and large format cameras for quite a while, although at that sort of price they're out of the range of your average amateur photographer. SiliconFilm has been promising digital backs for 35mm cameras for as long as I can remember, but they're still "under development" - read vapourware. They are showing two new models on the website (4.2 and 10 megapixels), although the product "photos" on their website leave a lot to be desired.
For those who are wondering what a digital back is and why you'd want one - it's a device which is attached to the back of the camera and provides an imaging surface in place of a roll or sheet of film. They can also have onboard flash storage or they can be wired to a computer. Pros may add digital backs to their kits because they already have thousands of dollars worth of camera bodies, lenses, filters and other accessories. Rather than buying a whole new camera system and associated accessories, they can get a digital back to fit on their cameras and keep their existing kit.
...is found here Roger N. Clark's photography page provides supurb comparisons and information comparing film grain resolutions, and including digital cameras in the mix.
Many pundits here have been instantly shouting that 16+megapixels are unnecessary. They are very wrong. 16 megapixels only approxomate 35mm-- and don't even come close to large-format film.
The comparison is educational & eye opening and EXTREMELY well documented, with pictures.
The readers digest version is that "From these tests, it is my opinion that digital cameras will match Fujichrome Velvi 35mm film when they reach more than about 10 megapixels. Somewhere in the 12-16 megapixels will produce color image quality comparable to 35 mm film (this is a compromise of more intensity detail and less color detail than film). Somewhat fewer megapixels, approximately 7-8 Mpixels will match 35mm film intensity detail but at below 35mm film color detail.
Medium format film: about 50 digital camera megapixels are need to match Fujichrome Velvia in 6 x 4.5 cm.
Large format: more than 200 digital camera megapixels are need to match 4x5 Fujichrome Velvia film. How much more needs futher testing. "
Thanks Roger N. Clark.
Canon's CMOS-based sensors, which will be used in the D1s, have proven excellent color stability and tonality when used correctly as shown by folks like Michael Reichmann of the Luminous Landscape. Previous digital-SLRs that used those sensors (D30, D60) demonstrated excellent low-light performance and had smaller than "full-frame" sensors, the size of the individual pixels on the D1s won't be very dissimilar IIRC to those on the Canon D60.
Larger than 3-4 megapixel resolution does matter to me, but only because I want to make 24x16 prints. If you're happy with 8x10s, there's nothing wrong with 3-4 megapixels in and of itself (although not all 3MP cameras are created equal by any means.) Still, for regular prints there should be no reduced quality at all with proper data handling.
I do landscacpe photography, 8fps is overkill.
who's ever heard of a professional photographer printing a digital image in large format?
Moving images through a digital stage is already standard procedure for many fine art photographers who do image capture on film, folks like the late Galen Rowell already use this process (a workflow that was, interestingly enough, improved a lot with the work of former Mac Ghod Bill Atkinson. (Interestingly enough, these processes end up again back on silver nitrate paper, but I digress.)
Starting off with digital images would actually remove layers of "stuff" happening to the image reducing quality--so long as the orignial image is detailed enough (in spacial resolution, in contrast range, and in color resolution.) Existing sensors can achieve this, the missing link really was resolution.
The new Canon D1s (not to mention the Sigma SD9, the Kodak 14MP SLR, and the Kodak 16MP digital back for the to-be-announced-in-the-next-day Hasselblad H1) are going to take serious bites into the serious film photography market.
I'm a nature photographer.