Slashdot Mirror
"Red is Dead" Optical Mice LED Change
A reader sent us the
HOWTO for changing that red LED on your fancy-pants new optical mouse to blue - or, I suppose any other color. I think I'm fine with what I've got - although, the glass tops on tables does make using optical mice a pain there.
Yes, red LED's are cheaper, but there is another reason, too.. They also want to use the cheapest CCD available. That's going to be a monochrome CCD that's sensitive to larger wavelengths. A red LED is going to work better on that.
With that in mind, an Infrared LED would probably work great with optical mice and their cheap CCD's.. maybe even better than red. You might have to remove an IR filter from in front of the CCD, and be wary of using them in a room with flourescent lighting, but it'd be good to try. How cool is an optical mouse with apparently NO light?!?!
If you want the "cool" blue look for whatever twisted ass reason, just use a blue LED and an IR LED in paralell. You might have to play with different led's/led voltages to get the right balance between a responsive mouse and the cool blue glow your riceboy heart desires, but again, it should work.
~GoRK
Serously, why do you need to ask why? Present a geek with a gadget, and he will find some pointless way to modify it, just for the sake of modifying it.
Me? I think it'd be cool as hell to have a blue LED light under my mouse.
Still, MSI color their mother boards, including ports, etc in a purple hue. I'm pretty sure they'd get the material in that boring green color easier, but it's all about standing out of the crowd. Same reason to why you'd make your LED blue.
Beware: In C++, your friends can see your privates!
Let's see... 700nm would have to equal one pixel movement, right? That means that for a full 1280-pixel travel across the screen, he'd only have to move the mouse 0.896mm (I think).
(Disclaimer: fuzzy math ahead)
Who says the mouse hardware has to send a constant (not variable) motion:pixel signal? Lets assume it sends a 'move cursor' command once per millisecond. I (just now!) moved my mouse across my 1024 pixel screen, and it took about two inches (5 centimeters) of mouse movement, at default windows mouse settings. That's about 2.054 pixels per millimeter mouse movement. During each millisecond, a move of anywhere from 700nm-1cm could translate to a one pixel cursor movement, then 1.00000001cm - 2cm would be two pixels, etc. The sharpness would only come into play if someone managed to move it 701nm in less than one millisecond, it would still correspond to a one pixel movement, where as less accurate mice would not move the mouse at all.
I don't think it matters whether your beam is 400nm or 700nm, unless it helps the laser track the mouse across non-optimal surfaces such as solid colors or glass. What may appear solid to a sensor at 700nm resolution could appear slightly patterned at 400nm, kind of like doubling magnification on a microscope allows you to find texture on surfaces which previously seemed flat.
$8.95/mo web hosting