Last-Mile Solution For A Rural Land Co-op?

macguys writes "My community consists of about 150 households spread out over several hundred acres in North Florida. We are far enough away from the nearest city that broadband cable and DSL services don't make it here. We're well organized, and used to working together on projects. We have a lot of home based business offices here and high speed access something that many of my neighbors are hungry for. We've looked at projects like http://www.magnoliaroad.net and know that others have addressed the issue with 802.11b/g/etc. There is no big problem getting a T-1 to the community. That part is easy. The hard part is distributing the bandwidth among those here who want to participate. Wireless works in places but in general this land is covered in hardwood and pines and the signal drops off quickly. We have a long history (community is 25 years old) of working together to solve problems. Running copper or coax is not out of the question if we can find a reasonable way of distributing the bandwidth. Any suggestions are welcome."

Comments

Fiber

[geogeek6_7]

In my community, we chose to use ethernet over fiber. You avoid any electrical concerns, and the fiber can be buried. We purchased 6 strand fiber from Anixter, and have been very happy.

I would highly suggest fiber as opposed to just about anything else--- it takes work to install (dig ditch, we put in conduit, then pulled fiber through it), and it requires a special terminiation kit, but the results are extremely rewarding.

~geogeek

Re:Have you tried

[chundo]

Here's the previous /. article. The people that did this posted a pretty detailed FAQ of how exactly they went about it - pretty interesting read. There's also some mention of their encounters with the FCC, which may be useful in helping your community project avoid legal pitfalls.

-j