Power-over-Ethernet: IEEE 802.3af Draft

SkewlD00d writes "Want power (~10W) and your fat 10/100Mbps pipe (1Gbps maybe) on the SAME jack. Surf the web and recharge your handheld w/o finding its clunky base/transformer, home automation, and control systems are just some of the possibilities. Using suitable hubs/switches or dongle, power can be provided over unused pairs, or possibly raise the signal offset above DC, X10-style (no link, u know why). See IEEE 802.3af DTE Power via MDI Task Force. Maxim (not that one :o) already has some goodies. They have schematics for 8.25W/12.5W single-output and 14.2W triple-output 802.3af PSU. Try FindChips if you're looking for them; they're in production and are NOT vapor-ware!"

Comments

Great for powering wireless APs

[kriegsman]

Here's a useful how-to on powering wireless base stations using Power-Over-Ethernet (POE). Several wireless vendors already sell POE kits for wireless APs. Here's a POE kit for the AirPort.

Power+Ethernet over one wire is a great combination for settting up APs, because many of the interesting places to put a wireless access point (e.g., in the attic, by the pool, in the middle of the ceiling) may not have a power outlet nearby, or you may simply not want to run two sets of wires (AC power + ethernet) to the location.

-Mark