Slashdot Mirror
Building A (Serious) Home Network From Scratch
Casey Lang-Vie writes "THG are running an article that outlines how to build a home network from scratch. I wish I'd read this before I attempted - now I have a few (ok, 8) unsightly holes in my wall." This is the type of network that encourages home ownership rather than rental.
As is detailed here and here, Toms Hardware recently performed a media blackout at a Public event, the Million Man Lan Party.
They are currently threatening to sue an online journalist (who happens to be a poor college student) for libel regarding his reporting of this story. Fortunately, the friendly folks at Hardocp have stepped in to provide some legal assistance for the guy, to make sure he is not railroaded into pulling down his editorial describing THG's media shenanigans.
Do your part for Internet Free Speech. Boycott Toms Hardware Guide.
You are right...and as soon as I think one of my neighbors can/will do that, I'll upgrade my wireless network security.
I regularly run net stumbler and the like to see if I can pick up other wireless networks. When I think I actually need better security I'll add it. For the time being though, there is nothing on any of my computers that really needs securing.
As for why I don't use WEP? I've found it somewhat buggy and it sucks up bandwidth.
Installed in mid 2001 in Australia. At that time, the cost of getting 9 x ethernet ports, 10 x telephone outlets between two lines, TV cable to 4 extra locations and changing existing crappy 600-series telephone sockets to RJ-11 was cheaper than buying wireless bridging gear for the three main computers I had at that time.
:P And I don't feel like implementing 802.1X/LEAP/VPNs at home either.
Plus I got 100mbit ethernet instead of 11mbit wireless, and it meant that in the future I was able to add a networked printer in another room without having to buy yet more wireless gear.
While I'm more than capable of doing the wiring myself (I have done in many north american homes), in Australia many homes, such as mine, are all brick, instead of stud and dry-wall. This makes installing the points a significantly difficult task, so for A$1400 all up (US$700 at the time), I think I got out of it pretty well. This also included a 8 port switch and signal amp for the TV signal.
I don't trust wireless security to the point of wanting my own access point, thanks muchly. I can put it in my insecure DMZ, but someone might use my bandwidth and monthly data allowance, which just costs me more
I've read the comments and I hear people saying, "Use Wireless, it's less hassle," as well as networking horror stories.
Well, I've got about both. My first day on the job as a High-Speed Cable installer, I ran my drill through a power main. Knocked me on my ass, and I had to buy a new drill and pay to have the customers house re-wired. Not a fun experience. What did I learn? Look on both sides of the walls, and always ask the customer if they'd like their jack there.
In my 'house,' Each 'Data box' has 2 Cat5E, a fiber, 2 2-line phone jacks, and 2 Coax. I use this so I can provide a secure/DMZ, have the ability to upgrade, as well as send signals (e.g., videocams) to other devices in my house. The only reason that I use wireless is so I can use the occassional Free Access point that's floating about, and war-driving. My WAP in my house is on, however, it's on a seperate vlan, and no one really uses it.
Stay away from wireless--sure it's easy, but, do you really want your data out there for the world to see? For the effort that you use to run your wire and make sure the job is done right (e.g., use Mini-Com's from Panduit, make sure they're snapped down all the way, and make sure you've punched down everything/terminated your fiber right), you'll have the satisification that you've done a job right, and that your data is safe and secure.
I disable sigs...do you?
I did mine (a small 3 bedroomed detached house in England) all by myself.
I was fortunate in the fact my walls are of plasterboard construction so I had no problems running cable down them, except between floors. I put a switch and a wireless router in the attic.
What did I learn?
a) If doing it again I would use some conduit pipe to make rewiring easier. However I did put 4 CAT5 ports in each room, which is enough for any small house!
b) buy a big roll of cable and make your own cables - its much cheaper that way.
c) Plan and check before you knock holes in walls
d) I'm a good network installer but a terrible plasterer, put any holes in walls where they'll be most hidden
Donte Alistair Anderson Roberts - hi son!
Karma: Chameleon