Melamine Ceiling Tiles and the Quiet PC

Delta Screemer writes "What good are ceiling tiles when it comes to making a computer quieter? Well, Max Page of FrostyTech has found a use for 'Melamine Foam Sound Absorbing Ceiling Tiles' as a cheap way of lowering the noise a computer produces. By lining the insides of a computer with these $3 24"x24" industrial office panels he was able to quiet a computer by several dBA. That may not sound like much (pun intended), but when you compare the price of these melamine foam panel to products like Dynamat the price difference is substantial."

Comments

here's the article from google's cache

[CowBovNeal]

Melamine Foam Sound Proofing for the Computer Case

If you have a noisy computer you know how annoying it can be after just a few minutes. I usually spend my time on the computer with a pair of headphones on just so I can escape the noise of the three or four cooling fans rattling around inside my computers' case.

If I had a big enough desk I would have kicked the case to the back and pilled on a few errant sweaters to deaden the sound, but since I don't, a good pair of headphones are the next best thing.

Obviously this isn't really a solution to the problem of computer noise, so I began looking into ways of quieting the computer. In a perfect world, my computer would be absolutely silent. Since we are often forced to deal with reality, the best we can hope for is a very low noise signature.

To accomplish the task of quieting down my computer there are basically three options. The first is to replace all the components with lower-end versions that don't need active cooling, or require as much of it. This isn't going to happen anytime soon, and so the next best thing would be to replace all my expensive cooling hardware with other gear, either designed to be much quieter and with the same level of performance, or which is silent and performs pretty poorly in comparison. This is pretty easy to do, and could take away much of the noise my computer creates, but I wanted to try something else first.

Finally, the last option is to insulate the case against noise. Given the small amount of space a computer case offers users to play around with, this is the most challenging option. If you do your research and pick the right materials it's an easy way to knock several decibels off the amount of noise a computer creates.

How to Make a Computer Quieter?

After hunting around for a manufacturer which offered some kind of sound proofing product for computers the only one I could find was Akasa's PaxMate. Unfortunately none of the retailers around here carry this product so I can't tell you how well it works yet. I stumbled upon a few Japanese companies which made various type of sound absorbing materials specifically for the computer, but again, there was no where to buy them.

As the sound eminating from my Antex SX1030B grew more and more irritating I decided to forgo the store bought stuff and see what the world of industrial sound absorbing materials could offer.

My only two criteria for sound proofing the Antec case were that the sound absorbing material would have to be less than 3/4" thick, and not too expensive. With constraints like that, more than half of the commercially available sound absorbing foams and pads were out of the question. Many of them were hundreds of dollars a sheet, and 3"-6" thick.

Industrial Melamine foam for a quieter computer?

(photo)A close up shot of the Melamine Foam. Measuring 8.5mm thick, this soft foam is coated on each side with a stiff fiberglass fleece which resists bending. The soft foam can be compressed, and will spring back to shape.
Some 'Melamine Foam Sound Absorbing Ceiling Tiles' I stumbled upon caught my eye because it had a listed NRC value of 0.95, (where 1.0 is the most sound absorbing you can get), was just 1/2" thick, and was reasonably priced for a good-sized sheet (see blue box at right for where to get this material). The trade name of this product is reportedly 'Whiteline', and it's made by Illbruck GmbH.

NRC stands for Noise Reduction Coefficient, and it is a number which ranges from 0.01 to 1.0, representing the average amount of sound absorbed by a material. Materials are tested in a sound lab at 200Hz, 500Hz, 1000Hz, and 2000Hz for their sound absorbing properties, and the average of all those results is the NRC number. Different materials absorb different frequencies of sounds differently, so the NRC number offers a common way to draw comparisons.

In any case, the Melamine Foam appeared to be a good sound absorber, and didn't seem to have too much of a thermal insulati

and here's the google's cache

[CowBovNeal]

Cache