Slashdot Mirror

← Back to Stories (view on slashdot.org)

Wireless Growth & Wireless Interference

Posted by Hemos on from the confusing-the-waves dept.

windowpain writes "An article in Monday's Washington Post says "The explosive growth of the mobile phone industry has crowded and tangled the nation's airwaves to such an extent that wireless company signals are increasingly interfering with emergency radio frequencies used by police and firefighters, public safety agencies said." Wifi is not a problem, evidently. Understandable, given its short range."

1 of 132 comments (clear)

  1. Re:Exactly how crowded? by Pedrito · · Score: 5, Informative

    It's a combination of frequency, bandwidth, and a few other factors. For example, when something is at 800mhz, that's the center frequency. It will have a bandwidth associated that may be a few khz or a few mhz, depending on the application.

    Then you get a combination of different technologies. Someone else mentioned TDMA, CDMA, GSM, and some others. Some of these operate in the same bandwidth without significant interference because the way they operate is so different. CDMA for example, doesn't suffer from the same kind of interference that TDMA, GSM and a few others do.

    There's a technology called Ultra Wide Band that may take off over the next decade. While it covers a very large bandwidth (as the name would imply) that would normally interfere with other technologies, because of the way it operates, there's little, if any interference. The nice thing about it is, you can operate a number of different devices, each paid of sender and receivers has a "code" that allows them to communicate. Nothing else will interfere and many devices with different codes can operate in proximity.

    Most technologies operate on the basic principal of sending a signal via the actual radio wave. They do this by modulating some part of the wave, usually frequency or amplitude (hence FM and AM radio).

    UWB doesn't do that. Instead, it sends pulses very quickly (in picosecond lengths) and the pattern created by the pulses (think binary, on and off), are what are used to create teh signal.

    Another advantage of UWB is that it works at a lower power (given the same range). Also, unlike the higher frequency applicatons (particularly when you get up to 5+ ghz), it doesn't have the same issues penetrating walls and such. Nice technology. Hope it makes headway.