Athlon 64 Motherboard Triple Threat Round-Up
SpinnerBait writes "Soon after AMD released the Athlon 64 to the public, eager motherboard
manufacturers unveiled their latest motherboards for AMD's new baby. Some are
offering basic packages that boast features and performance, yet forgo the
extras found in premium bundles. Other manufacturers are offering snazzy new
packages with all kinds of extras and unique features. The only thing left to do
is decide which one is for you. HotHardware has an
article posted up, that
showcases and benchmarks three top Athlon 64 motherboards, from Asus, MSI and
Shuttle. These boards are looking more refined every day."
Tyan already have at least *six* different motherboards for AMD's 64-bit platform.
Most of them are for Opteron though, but that means that there is a lot of experience within Tyan for the platform, so the A64 boards will be good from the get go.
Sounds like you want something like the Tyan K8W which has AGP 8x, PCI-X and supports 16GB of memory.
Sure, it is dual processor, but if you are wanting PCI-X and 16GB of memory support, then you probably want dual processors. I suppose you could live with one processor and 8GB of memory though.
64bit CPU is a lot slower than 32bit CPU with the same technology anyway.
It depends on what you're doing. If you're handling a lot of 64 bit integers, then it isn't. In any case, AMD64 is not the same technology as ix86; the massive increase in registers and additional parallel processing units can add a lot of speed in certain situations.
Chaintech ZNF3-150, FIC K8-800T, and MSI K8T
Chaintech ZNF3-150 = nVidia nForce3
FIC K8-800T and MSI K8T = VIA K8T800
Whenever the offence inspires less horror than the punishment, the rigour of penal law is obliged to give way...
So why no link to our reviews. :)
ignorance is bliss. googlefiberatx.com
Actually the memory controller is on the CPU so there any limitation should be with the CPU and be common to all three boards. I really can't see where the artificially low max memory counts are coming from, the Athlon64 supports either 4 registered DIMM's (8GB total), or 3 unbuffered DIMM's (6GB total). Of course most people who are buying an Athlon64 instead of an Athlon64 FX or Opteron are not going to spend the huge sums necessary for 2GB registered DIMM's =)
There are 4 boxes to use in the defense of liberty: soap, ballot, jury, ammo. Use in that order. Starting now.
Doh, hate to reply to myself but now that I have read a bit more into the Athlon64 data sheet I see where things are happening, for DDR400 DDR the Athlon64 is limited to 2 unbuffered DIMM's:
e _papers_and_tech_docs/24659.PDF
-- Up to three unbuffered DIMMs according to the loading described in Table 3 on page 16
-- Up to four registered DIMMs (note DDR400 not available on registered DIMMs)
The controller provides programmable control of DRAM timing parameters to support the following
memory speeds:
-- 100-MHz (DDR200) PC-1600 DIMMs
-- 133-MHz (DDR266) PC-2100 DIMMs
-- 166-MHz (DDR333) PC-2700 DIMMs
-- 200-MHz (DDR400) PC-3200 DIMMs (unbuffered DIMMs only, two maximum)
So with cheap unregistered DIMM's you are only going to get to either 2GB at DDR400 or 3GB at DDR333. I guess AMD's engineer's didn't figure it was worth the cost to support more ram on their lower end chip where the typical user would never get near the limit due to costs anyways.
This is all from http://www.amd.com/us-en/assets/content_type/whit
There are 4 boxes to use in the defense of liberty: soap, ballot, jury, ammo. Use in that order. Starting now.