Slashdot Mirror
What (non-PC) Hardware Do You Hack?
Lis writes "Mike Langberg at the Merc News interviewed Scott Fullam - Scott wrote the book 'Hardware Hacking Projects for Geeks' which includes things like a video periscope for your car, an Internet toaster, Cubicle Intrusion Detection Systems, and talking Furbys. (Instructions for the toaster and coffeemaker are up on the O'Reilly site.) Almost any kind of consumer electronic equipment can be modified to do things it wasn't intended to do. Ok, you'll probably void your warranty in the process, but you could end up with something even better than the original. Or not. But it's just gotta be interesting. So what have you hacked, and into what?"
3 old dot matrix printers and a dremel become a 3D rapid prototyping machine that can carve a 3D relief into styrofoam (or anything else, if you've got the patience to let it run that slowly...)
I once dremeled a PCB from an old power supply into several pieces, then resoldered and glued it back together so that it still worked, and tried to sell it on eBay as modern art. Unfortunately, no one bit. An interesting hack I've seen is something I think a lot of electronics slashdotters out there should note: Cheap oscilloscope using your sound card. The software is available on the web, just get your signals into at +/- 1 or 2V range, and you have a dual channel low frequency scope that plugs into any sound card. Check the voltage range of line-out to get an idea of what's acceptable. I started making an adapter to provide a high impedance input and scaling the signal down, but got distracted and haven't revisited the project in a while.
"No one likes working in a hamster wheel, and your shop smells of cedar shavings from here." - TaleSpinner
Plus on 80/90's GM EFI cars, there's a cruise fuel saving routine that's not enabled from the factory. 29 MPG highway from a 350 CI V8 baybee.
We built a fireplace and I wanted something cool for the kids so I took one of the kid-high rocks and drilled a hole in it then epoxied in a brass "peep hole". I put a geode behind the rock and ran some fiber optic cable to it then mortared the whole thing up.
The other ends of the fiber optic cables went to a hidden box which contains the guts of one of these fiber optic Xmas trees (including the spinning color wheel).
Push a secret rock near the peep hole rock and the whole thing turns on - cool crystally color changing happiness. The kids love it. Now on the other side of the fireplace I installed a "peep show" but that's a different story...
I've made up my mind and now I've got to lie in it.
Happy Trails!
Erick
http://www.busyweather.com/
Within weeks he had his unit all wearing beards.
He arrested a senior member of the army who came back to the base too late after a night out.
And the best bit: In the army one's transport to and from home each weekend is paid for. He lives the other side of Europe from Italy, so they offered to fly him. But no - the rules state that it had to be by train (which takes what, a day? a day and a half?) so he ended up spending just a couple of days a week in Italy...
They sent him home soon afterwards. Nicely. Permanently.
Give this guy a system (of whatever kind) and he'll do scary scary things...
Two sheets of bounty with a little Pledge sprayed between makes an excellent, cheap replacement for those damn swifter rags.
Ever notice how it's so difficult sometimes to wake up when it's dark outside? It seems that I'm at higher risk for getting up late when it's overcast or stormy outside. It seems that the light level triggers how awake you are. If I have to wake up early, I'll usually leave a light on in the room; it helps a lot. But it's not the best solution, and I'd love to smooth out the roughly torn edge between sleep and consciousness when the buzzer screams at you.
I'm building a clock that includes a wall socket. You plug a lamp into the socket, and half an hour before your set wakeup time, the lamp begins glowing. It increases brightness gradually over a half hour so that by the time you need to wake up, you already are. It's not really a new idea, but it's fun. It uses a realtime clock chip, a microcontroller, and a triac for power control. Maybe not so much hacking...I guess it does "hack" a desk lamp into a wakeup alarm notification device.
Most of my other hacks are computer related; for example hacking a Sandisk 6-in-1 memory card reader to work with ALL CompactFlash cards, instead of only the new ones, with a single wire. I hacked a Nintendo R.O.B. into an internet-controlled pan/tilt webcam mount in an hour or two. Also ran a small server in college which used fetchmail to check for new messages, and would flash one LED over my desk and one in the door's peephole, so I knew I had mail just by looking down the hall from a friend's room. Lots of random stuff like that. My most recent major project was a small CNC machine, the computer, power supply, and driver electronics housed inside the case of an old Yokogawa data analyzer.
...
I think my Mini would count as a "hack" - See Picture
I used silly putty to create "timers" for instance to turn off a light switch. By dragging a wire through a blob of silly putty, using gravity or a rubber band, you can trigger lots of things. Silly putty by its nature makes for a relatively constant rate of travel and you can pretty accurately time things.
-- Senior Software Engineer, Attorney appearance services, locallawyerapp.com.
A work in progress.
Slowed down recently due to house-hunting, but nearing completion. The hardware is ready to go, just need to write the drivers & integration software.
What were you expecting?
Similarly, there is a bar in Milwaukee called The Safe House. If you go into the Get Smart phone booth and dial the secret phone number, it's hacked so that instead of dialing out it opens the secret back door out of the place. (How's that for a backdoor hack!)
About 20 years ago I 'hacked' a car LED clock module by wiring some ribbon cable to the relevant parts of the PCB and mounting the unit with a 12V transformer+PSU, programming switches and a 10A mains relay in a small case - the end result was a unit into which I could plug my coffee percolator and have it 'brew-up' at the pre-set time in the morning! Because it also had a 59min count down timer, I could also set the coffee brewing at other times knowing that the timer wouldn't let the percolator boil dry!
My most recent hack was to make up a short lead that runs from a universal (90-250v) multi-voltage 2A DC power supply. On the 'output' side of the lead is a 12V car 'cigar lighter' socket into which I can plug a Belkin 12V 'car' to 5V USB socket adaptor - now with the relevant leads I can charge my phone or PDA or use anything else that normally takes power from a USB port - this means I only have to take one power unit with me on holiday or on business rather than one PSU for phone, another for PDA, another for digital camera, NiMh battery charger etc.
AT&ROFLMAO
When I was growing up, we had a microwave oven in our kitchen whose clock could be set by punching in the time on the number keypad, and hitting the "Clock Set" button. Pretty standard, realy.
So one night, with more free time than is strictly healthy, my friend Steve Roche and I were sitting around microwaving things, when one of us decided to set the time on the clock to "6:66", just to see what would happen.
Fortunately for us, the programmers of the firmware didn't include any validation code, because it let us set the time to 6:66. We sat there for a minute, debating what would happen next. Would it change to 7:07? 6:67? 6:07? 6:67 it was. What would happen, then, after 6:69? Again we debated -- would it go to 6:70? By that time we sort of assumed it would.
Well, it fooled us but good -- after 6:69, it invented a new number . The display read "6:6^", or something like that. We watched with fascination as it made up five more brand new digits, before changing to 6:70.
Damned if it wasn't using hexadecimal.
Then we microwaved some wormy flour, which stunk up the house in some awful, indescribable way, and ended the microwave experiments for the evening.
I hacked my son's Darth Vader Toy to spin clockwise when I received and e-mail and counter-clockwise when my machine was attacked (port scanned). I used a floppy drive stepper motor and mouted it in an old CDROM case
r ip heral-2.jpg
http://www.cityhall.com/projects/darth/darth_pe
-Monta at cityhall.com