Slashdot Mirror


Cheap PC Oscilloscopes - Any Recommendations?

Missionary Man asks: "I'm an electronics teacher looking for a good (but reasonably cheap) PC based oscilloscope for classroom demonstration purposes. I've done a reasonable amount of research and come up with a few contenders. Ideally I'd like something with a bandwidth of up to 40MHz and 2 channels. Does anyone have any tales to tell regarding the use of any of these scopes (or any others I haven't found or mentioned) and can recommend a suitable device?"

"Here's the list of my findings so far:

  • The DS2200C from USB Instruments will do 2 channels at 12 bit resolution, but only to 200KHz.
  • The PCS100 from Velleman at QKits runs to 12MHz, but only 1 channel. It has a bigger brother, the PCS500, that has 2 channels and 50MHz bandwidth, but is a lot more expensive.
  • Picotech do cheaper ones, like the ADC-40/42, but these only operate in the KHz ranges.
  • Link Instruments sell the DSO-2102S that runs to 60MHz with 2 channels, but it's a bit out of my price range.
  • Finally, I found the bitscope which seems to be just what I'm looking for, combining a 2 channel scope and an 8 channel logic analyzer for a reasonable price.
I'm hoping to spend US$300-$400. I recognize the software is a fundamental part of the successful operation of these units and any comments regarding the bundled programs would be most helpful too!"

7 of 321 comments (clear)

  1. Bankruptcy Auctions! by Supp0rtLinux · · Score: 5, Interesting

    Search google for bankruptcy auctions. I'm sure you can find what you're looking for. I work for a biotech that saved 75% of our initial budget by acquiring medical laboratory supplies from six other biotechs that went bankrupt in recent months. We did such a good job, our VC company gave us more than we asked for to buy the rest of what we needed.

    The only thing necessary for Micro$oft to triumph is for a few good programmers to do nothing". North County Computers

  2. Like Skee Lo, I wish... by ObviousGuy · · Score: 5, Interesting

    I sometimes think back to my college days and really regret that I didn't focus more on the hardware side of computer engineering, primarily delving into the Computer Science land of algorithms and language design. In the last several years of my employment in the embedded space, I have come into contact with more hardware than you could shake a stick at, and without that grounding in hardware that I should have gotten in school I feel a little overwhelmed when faced with anything deeper than a block diagram.

    I also wish that teachers like yourself didn't have to worry about providing materials like this within such a tight budget. It doesn't sound like this is just for this year's class, but something that can be used year after year. $300 for a material that can be used multiple times seems very cheap, especially considering the intrinsic value of the tool. Schools should be at liberty to spend what is necessary to bring the classes up to exceptional levels. Considering how the U.S. lags behind most other modern Western nations in Math and Science, such tight-fisting seems to be one significant factor in this drop off.

    Good luck in finding the right tool.

    --
    I have been pwned because my /. password was too easy to guess.
  3. Re:winamp? by seanadams.com · · Score: 5, Interesting

    You know, for classroom demonstrations a sound card should be perfectly acceptable for all kinds of things... especially considering that there is also very nice free spectrum analyzer software available. On top of that, students can easily repeat experiments on their systems at home. Of course with a max sampling rate of 48KHz there's only so much you can do, but low speed osciallators, R/C circuits, switching power supplies and all sorts of things can still be seen to a useful extent.

  4. Re:Here's a good one by John+Miles · · Score: 4, Interesting

    Quite a few scopes by both Tektronix and Agilent run Windows these days. Windows can be a reasonable embedded platform. It provides a consistent user interface, saving the equipment manufacturer a lot of software work that's outside their core competency. System stability isn't too bad since the OEM maintains tight control over the drivers and only run one application.

    Not a bad solution, all in all, at least until you hook up an Ethernet cable to transfer some plots and your $20,000 scope gets r00tz0red and drafted into service in the war against SCO.com.

    --
    Dahlmann tightly grips the knife, which he may have no idea how to use, and steps out into the plain.
  5. Re:winamp? by seanadams.com · · Score: 4, Interesting

    Good point... I think you could probably address that by bypassing the cap on the input, but then your "zero" level would probably be 1.15V.

  6. Re:Educator? by NoseBag · · Score: 5, Interesting

    Ya left one out. Write/go to any local company doing e-tech type manufacturing or engineering. Ask if they'll donate their old obsolete eqpt that they've already written off. I've never been in an engineering lab yet that didn't have at least one dinosaur in it.

    --
    Cloned foods give the statement "We had that last week!" a whole new meaning.
  7. Re:winamp? by Rebar · · Score: 4, Interesting
    Depends on the size of the capacitors on the input side of the sound card - the larger the RC time constant, the lower the frequency signal that can be observed. My old SB compatible card could pick up as low as 3hz signals really easily - I had an animometer hooked directly to it and counted zero-crossings to determine the wind speed. The signal may not be that linear under 20hz, but it's still really easy to see.


    I agree with the parent post about a sound card being a nice classroom demonstration scope. For higher mhz, you can pick up a real scope from Ebay for much cheaper than a PC card solution.