Slashdot Mirror
HDTV TiVo Now Shipping
davco9200 writes "After over a year of waiting, the HDTV TiVo from Hughes (HR10-2350) is finally shipping. People have been receiving their first unit and you can read their first impressions. Suffice to say: they love it."
All DirecTiVo (including HD), record the digital bit stream directly from the satellite onto the hard drive, so there is no degradation at all. The HD-TiVo added OTA (over-the-air) tuners for the local digital TV broadcasts and those bits are also sent directly to the hard drive. 19Mbits/sec is the maximum HD rate for OTA, while satellite/cable encodings of HD tend to be 13Mbits/sec or less.
In reading the initial comments about the HD-TiVo, there is one complaint that could be a problem for those who are currently using a DirecTV HD receiver like the DTC-100 and a non-HD DirecTiVo.
Apparently, when the HD-TiVo gets a non-HD signal, it doesn't automatically switch its output to 480i/480p. It also doesn't stretch/zoom the image to fill a 16x9 screen. This means you need to manually switch the output if you want your TV's de-interlacer/scaler to adjust the image. Depending on who you ask, this is a no-op, annoying, or fatal. (I'm probably in the annoying camp)
Dude, that's not even close to a Tivo.
The VIA chipset supports MPEG2 acceleration (offload of iDCT and Motion Compensation) *not* full HD decoding. So, you still need a lot of CPU horsepower to display HD - more than the 1GHz VIA C3 has to offer.
Beyond that, there is no way to hook an HDTV tuner to that board, not to mention the 2 Off The Air tuners the Tivo supports.
Then, you've got the DirecTV input.. The Tivo has 2 DirecTV tuners, while it's impossible to use DirecTV with a PC board.
Then, you've got the software. There are some decent PC PVR packages available. But, nothing up to the Tivo's level.