Foam Gluing Flaw Killed Columbia Astronauts
Freshly Exhumed writes "Now it can be told: NASA's Columbia Accident Investigation Board has blamed the faulty application of insulating foam for the loss of the Columbia orbiter. From the chief engineer for the external tanks project: '...NASA concluded after extensive testing that the process of applying some sections of foam by hand with spray guns was at fault.' And further: 'It was not the fault of the guys on the floor; they were just doing the process we gave them'."
Nor are there any tiles, as more than two fool implies.
The foam is sprayed on, and it adheres directly to the External Tank's aluminum substrate (and itself, of course). Some metallic sections of the tank are coated with epoxy before being sprayed. But the process is slightly different on the bipod structure:
The insulated region where the bipod struts attach to the External Tank is structurally, geometrically, and materially complex. Because of concerns that foam applied over the fittings would not provide enough protection from the high heating of exposed surfaces during ascent, the bipod fittings are coated with ablators. BX-250 foam is sprayed by hand over the fittings (and ablator materials), allowed to dry, and manually shaved into a ramp shape. The foam is visually inspected at the Michoud Assembly Facility and also at the Kennedy Space Center, but no other non-destructive evaluation is performed.
-- excerpt from CAIB report vol. 1, p. 51
You can get all the CAIB reports here.
I hold it, that a little rebellion, now and then, is a good thing. -- Thomas Jefferson
What happens to a very draggy chunk of low density foam in a supersonic stream of air? It will rapidly decelerate, right?
Imagine you impale a cheap styrofoam cooler on your car's hood ornament and head out on the highway. At 70 MPH, the cooler pops off the hood ornament. What happens? Does it keep coasting along with little relative velocity with respect to the car? No. It smashes into your windshield at close to 70 MPH. Whether the car is accelerating or not has almost no effect on the outcome. It's the rapid deceleration of the foam that causes the significant relative velocity when it strikes the car. Only the relative velocity is important. Sorry the NASA engineers confused you by not suspending a block of foam motionless in the air and hurling a section of wing at it.
As for the bulk of your post, containing that half baked ranting, UFOlogy and conspiracy theories, I'd have to say you get the tin foil hat award for the rest of this century. I imagine you with your tinfoil hat, wrapped in tin foil from head to foot, in a titanium submersible on the bottom of the ocean. And the mind control waves still get through. All that trouble, and all you really need to do is...
UP YOUR DOSAGE.
>> My ultraviolent Linux switch video.