Slashdot Mirror
PowerBook Upgrade and Repair Guides
kwiens writes "We had such a positive response from Slashdot with our Free-As-In-Beer Mac disassembly instructions last time around, we decided to do it again: We've made six more FixIt Guides, perfect for those intrepid road-warriors who refuse to trust anyone else to work on their 'Book. Now there's nothing stopping you from trying that LNO2 overclock on your PowerBook-- or just a hard drive upgrade. The new Guides have professional photos, a new GUI design, and screw guides (no, not this). Guides are now available for all iBook G3, PowerBook G3, and PowerBook G4 models (including the oft-requested 12, 15, and 17 Aluminum 'Books)."
Considering how Apple treats it's customers that did not shell out the several hundred bucks for Apple care those guides are badly needed.
At least in Germany you have to pay at least 350 Euros if you want Apple to repair your 'book that is older then one year. Of course it's very well possible that you have to pay even more if something seriouse is broken, but even if just a part costing 5 Cents and taking two minutes to replace is broken you'll still have to pay 350 bucks.
To sum it up, I really like Apple's hardware, I really like OSX but personally I'll never buy anything from Apple again.
especially this link
I don't know how many times in the last six months I've heard idiots on IRC claim powerbook 12 inch models don't have fans because apple skimped on the design.
It's nice to be able to show proof. All hail intarweb.
Just open the thing up and figure it out for yourself. It's not rocket science, you know. I've done a bunch of upgrades on PowerBooks without a manual or guide, and it was pretty easy, once you've located the proper screws and whatnot. If it's a simple drive replacement or something, just make sure you have a torx screwdriver set and get crackin.
"I like systems, their application excepted", George Sand (French)
Just sandblast the thing and go for a 5uP3r-1337 look (make sure to tape over all the openings and all around the hinge first). Either that, or cover it in stickers... If you're just not 1337 enough, try this.
"I like systems, their application excepted", George Sand (French)
Use an ice cube tray (or two) for all of the screws, separating them by size, and draw detailed charts and notes as to where each one came from.
If you don't do this, you won't get it back together. Good luck!
Before buying from TiPaint, you might have a look at Google Groups. There have been a number of a complaints ranging from poor product to non-delivery.
One CPU cycle wasted on digital restrictions management is ONE TOO MANY.
I recently opened up my AlBook (15") to hopefully to upgrade from a combo drive to a super drive. Lemmie tell you - opening up this case is HARD! Undoing all of the right screws is nothing, but removing the top deck with those tabs - It's murder. I scratched the heck out of my computer and even when I took it to my Apple-Certified technicians (Yes, they claim there's a special tool for unclipping those little metal tabs.) they scratched the heck out of my computer and bent the bit of metal above the CD slot.
If anyone knows more details about a magic tool to help "pop the top" on an AlBook - Please, let the world know about it. Otherwise, I strongly recommend you get a thin plastic-coated pry bar for popping those tabs, and DON'T use a lot of force.
"One touch of Darwin makes the whole world kin." George Bernard Shaw
There's a reason they fixed your motherboard without question. They're legally obligated to (at least in the USA). From the Magnuson-Moss act 16 C.F.R. 700.10 section 102(c):
"No warrantor may condition the continued validity of a warranty on the use of only authorized repair service and/or authorized replacement parts for non-warranty service and maintenance. For example, provisions such as, 'This warranty is void if service is performed by anyone other than an authorized "ABC" dealer and all replacement parts must be genuine "ABC" parts,' and the like, are prohibited where the service or parts are not covered by the warranty. These provisions violate the Act in two ways. First, they violate the section 102 (c) ban against tying arrangements. Second, such provisions are deceptive under section 110 of the Act, because a warrantor cannot, as a matter of law, avoid liability under a written warranty where a defect is unrelated to the use by a consumer of "unauthorized" articles or service. This does not preclude a warrantor from expressly excluding liability for defects or damage caused by such "unauthorized" articles or service; nor does it preclude the warrantor from denying liability where the warrantor can demonstrate that the defect or damage was so caused."
"Nature doesn't care how smart you are. You can still be wrong." - Richard Feynman
In the G3 Pismo guide, only one I checked, they tell you how to pull the heatsink OFF, make no mention of the quiet little popping noise you'll hear when you do (it's the double-sticky thermal transfer tape, a tiny little rectangle on top of the CPU that fails when the heatsink is moved even slightly).
And they say to replace the heatsink. just do the reverse.
Well, NO. Apple made it very easy to break the contact between CPU and heatsink, even accidentally, and once that's impaired overheating is going to become a problem.
Look for posts in MacFixit forums, about G3s, Powerlogix, heatsinks, thermal transfer -- best advice I've seen has been put together by a fellow named Bruce Miller.
I'd recommend setting the processor performance level to "reduced" in the options tab of the energy saver system preferences menu, which should cut your processor to roughly half its speed. For me, crippling the processor made my 12" PB run at 50C instead of 65C when playing games with no noticeable drop in performance. The real limitations of laptops are generally HDD speed and RAM, so you may find that in most situations you don't even notice the reduction. I watched most of the Two Towers EE on last night and the fan didn't kick in once.
Alternatively, you could get a stand or something. But that kind of defeats the purpose of having a 12" PB.
~Tirinal