Slashdot Mirror
Printers - Are In-Cartridge Printheads Better?
koelpien asks: "I am a tightwad geek who likes to print photos without spending lots of money on OEM ink cartridges. Both Epson and HP have let me down; HP doesn't have a lot of third party cartridges available, and refilling the OEM's is a pain, especially resetting the ink level counter. Epson is just as bad, with cheap low-cost cartridges available, yet using them will often clog the heads, needing multiple ink-depleting cleaning cycles to restore proper flow. I am on the market for a new printer, and want to know which technology most Slashdot users happy with, in relation to printer brand and the use of third-party or refillable inks. Is one technology superior to the others, or are printers mostly the same?"
It's cheaper to have your photos printed at the photo lab than to do it at home. The cost of a high quality photo printer more than offsets the gains per photo. Consider that you need to replace the printer after a year or so of heavy printing (these things don't last forever as we all know) and you will typically find yourself far behind what you would have saved if you had just had the photos printed by the lab.
Now, with digital you have the opportunity to select which photos you want to print, plus the ability to digitally enhance pictures before having them printed, so this saves money over film in the long run. However, printing those shots at home is just throwing money down the drain.
Your question is too vague. What are your requirements? Do you do high volume printing? Or just a few HQ prints every few weeks?
This really makes a difference. Back in the 80s, before inkjets were common, I used to operate an Iris inkjet 3072, it made 11x17 prints with a cost of paper and ink of about 20 cents, IIRC (we charged $75 per print). Quart bottles of ink cost less than modern inkjet carts, each CMYK color was fed from a bottle, I only changed bottles about once a week, and the printer ran full time about 16 hours a day. BUT the printer cost $80k and the annual service contract was something around $8k. And you had to buy the service contract because the print heads (nozzles actually) died often, they required continual cleaning and replacement, it was a very high maintenance beast.
The point of this anecdote is you can get really REALLY cheap-per-print consumables (ink) but it isn't practical unless you're doing incredibly high volume or you need extremely high quality prints. You've merely shifted the cost from consumables to hardware maintenance.
So get us some more data on your requirements, and we'll be better able to make a recommendation. You could buy an Iris, or a cheapo disposable Lexmark, it all depends on what kind of printing you do.