Slashdot Mirror
Advice for a Novice Replacing Laptop Hard Drive?
frugalRepairs asks: "The hard disk in my Sharp PC-MV12W laptop recently died. It gave me warning and I had everything backed up. It was out of warranty and the repair folks want an arm and a leg to fix it. I would like to replace the hard drive myself but I've never done anything like this before. It seems to me that I would just extract the old hard drive, note the physical measurements, purchase new hard drive, and install it. However, I'm expecting Mr. Murphy to visit me as soon as I open the case and would like some advice from Slashdot experts. Do I need special tools? Does the BIOS have special needs? Are all 2.5" laptop drives created equal?"
1. Open computer cover
2. Verify that it's a 2.5" IDE drive
3. Go to shop, buy new 2.5" drive
4. Go back home, remove dead disk from computer
5. Plug new drive when the old one was
6. Close computer cover
7. Install OS
Honestly, there's nothing special to it. But there are two issues that you'll probably find:
a) Laptops are very crowded inside their covers. Write down where everything belongs as you take it apart. Take photos if possible, to make sure that you put it together in the same way later.
b) Laptop manufacturers don't like users messing with the hardware. Your laptop most likely has a cover underneath that you can remove by unscrewing a standard screw, and the hard disk is most likely inside it (that's the case with my Compaq Presario). However, it might happen that you have to use some special hexagonal key to reach the hard disk, as is the case on my wife's Sony laptop.
My site