Slashdot Mirror
System Recovery with Knoppix
An anonymous reader writes "This article shows how to access a non-booting Linux system with a Knoppix CD, get read-write permissions on configuration files, create and manage partitions and filesystems, and copy files to various storage media and over the network. You can use Knoppix for hardware and system configuration detection and for creating and managing partitions and filesystems. You can do it all from Knoppix's excellent graphical utilities, or from the command line."
This one's been around for a while. It's a useful resource, but some of the more specialised distros are easier to use for rescue disks.
http://www.frozentech.com/content/livecd.php has a good list of them.
"I've got more toys than Teruhisa Kitahara."
You can also use the gentoo live CD (you can even get an experimental one for reiser4) at www.gentoo.org.
k s/linux/library/l-knopx.html?ca=dgr-lnxw01-obg-Sys Recover
There are also lots of speecialised ones. generally, the only time a linux box wont boot though is just a lilo or grub problem...
By the way, the coralised link is: http://www-106.ibm.com.nyud.net:8090/developerwor
I think NTFS is probably read-only so you can't fix it directly. But in case you weren't smart enough to keep backups around, you can use Knoppix to backup your files over the network. I did the same thing for a friend who couldn't boot up her XP installation anymore after Norton Antivirus "cleaned" a bit too much (even safe mode didn't work). But I ended up copying the data to an external firewire disk 'cause the network (which Knoppix didn't have any problems to detect) was too slow.
Go Linux/Knoppix!
Ricardo.
For those not in the know, "Knoppix is a GNU/Linux distribution that boots and runs completely from CD." (Source: www.knoppix.net).
:-) The parent comment is in fact funny (and quite so!), rather than insightful as it's currently moderated. ;-)
So it is kind of hard for a Knoppix installation to become corrupt; worst case scenario is you just burn new copy of the Knoppix CD.
"You can't install it to your hard drive."
Yes, you can: knx-hdinstall.
sigs, as if you care.
captive-ntfs 1.14 works just fine for me w/Knoppix 3.4 (though 1.15 w/Knoppix 3.6 failed to mount my NTFS partitions, that is another story altogether) ... so, you can actually read/write to NTFS from Knoppix if you manually configure captive and mount the NTFS partition(s) yourself.
Umm... Knoppix can be installed on to the hard disk and many people actually do so because then they get a Debian-like OS on their hard-disk.
w To
Knoppix itself ships with a hard-disk install script. See this page for more info - http://www.knoppix.net/docs/index.php/HdInstallHo
Regards,
The Shaitan
A friend brought me his machine to upgrade.
/home (hdb)....
/home from hda to hdb then reformat hda and partition it up in a useful way.
/home data from hda to hdb.
/home is on hdb1.
/home on the new 120g drive and asked me if I wanted to change the permissions and ownership over. I said yes.
/home directory instead of the 10gigs he had before.
A Frys cheapo Linux special, originally it came with a 30g, 128m ram and Thiz Linux. I Thized the disc straight into the trash and installed Suse 9.0 on it for him when he first got it.
Well, as time went on he realized that his system needed upgrading. So I sent him to the store and he brought back another 128m ram, a 120g drive and Suse 9.1 Pro.
The plan was to have the old doggy 30g as his boot/OS/work drive (hda) and his new 120g as
Well, booting up 9.1 does not come up and say
"Hey, I see you have data on your drive already and a new blank drive. Would you like to move it around in anyway before we procede?"
No, Suse just suggests that you wipe everything out and start over. Even if you tell it you want to do an upgrade, it has NO PROVISION what-so-ever to allow you to format the new drive then move your old
Ok, so in light of this, I took Damn Small Linux 0.8.2
and booted up. Opened a root terminal, fdisked hdb, formated it for ext3 then moved all of his old
It copied EVERYTHING. Hidden files, configurations, email, cookies, bookmarks, music, photos, the whole works.
When it was done I booted into Suse 9.1 pro, did a NEW INSTALLATION and wiped hda clean, installed the OS on it and told it that
I created the same user and password as the old system so Suse looked at the
The install proceded normally to completion.
When it was finished and I rebooted the system, it was identical to the way it was brought to me except that he now has a 120g
Damn Small Linux is the very best tool a tech can carry with him. I keep a copies on biz cards in all of my tool boxes and in each of my vehicles.
I don't leave home without it.
I also carry standard Knoppix in case I run into a case where I need k3b on the ailing machine.
I have several other versions of Knoppix I keep handy for various network jobs, like knoppix-std
and a few other network related Knoppix knock offs..
As a computer networking student I'm absolutely AMAZED this hasn't gotten more attention then it has.
Under your MS stuff (I know, I know, but in industry it really is a necessary evil) you should definitely have a Windows Boot CD. And I don't mean a DOS floppy! Its basically a live, say Windows XP disk with preinstalled software (virus scan, adware removers, registry editors, complete networking setup). It really has all the tools you commonly use when fixing the obligatory windows box and probably a few you've never even known you'd need.
I highly recommend you build one, and if the directions sound a little complicated, just take your time and reread them, there's about 3 step and none of the are actually complicated.
The worst thing you can do is boot a infected PC from an infected hard drive, not to mention the trouble accessing NTFS with FULL read-write.
Quack, quack.
I think you could have added the new disk to the old running system, fdisk and format it using yast or commandline tools, move your home there, and then re-install the system on the 30GB disk. / /home, format it) /dev/sdb1 is now mounted as /home) /home.orig/* /home /home.orig
/home is /dev/sdb1.
I would have done:
- login as root
- cd
- mv home home.orig
- mkdir home
- yast
(add the disk, say it will be
- df
(make sure the
- mv
- rmdir
home is now on the new disk.
reboot system from CD, install 9.1 on 30GB and during partition selection tell it that
that should do it.
Luckily I haven't had to use Knoppix to recover any crashed systems...
However I did use it to tweak the device settings on my install of FreeBSD. Knoppix has always detected anything I threw at it, while FreeBSD isn't quite up to the same level (but getting better). So, I gave Knoppix a whirl and got enough driver info for the noname videocard that shipped in the used computer I was setting up as a server.
Rock on Knoppix!
First of all, there are a couple of basic steps people can take to ensure their systems are rescuable and secure regardless of any patches they have applied.
Following above steps is usually enough to prevent rescue situations because the root filesystem is vital, so protecting it is the first line of defense, but if the worse comes to worst and you ever get into trouble, you must learn with the problem. If the kernel loads and init doesn't, it may be a libc problem. Try booting with init=/bin/sh, remount your filesystems read-write, examine the problem, umount them (or remount them read-write, when unmount is not possible), sync, reboot and watch the changes. If the kernel does not load, you may need a
captive-ntfs needs a captive user and group to work properly. Manually adding them allows it to work correctly again on 3.6. I even made a personal remaster of Knoppix with fix and the XP drivers captive-install-acquire already done. That last is handy because I have had NICS that XP didn't recognize and it gets the driver install files on the disk.