Slashdot Mirror
Hot-Rodding A Bluetooth Adapter
carbolic writes "Remember the Bluetooth records where we 'modded an adapter' and connected to a cell phone first from 1 kilometer, then from 1 mile away? Popular Science has the hack in the November issue (or online now) with instructions. Additional step-by-step is laid out here for USB, and and here for PCMCIA. Soldering is required, but come on - you can't be a true geek without learning to solder."
You mean like this hack?
you can't be a true geek without learning to solder.
The bigger the glob, the better the job!
Basic soldering tips.
Bad boys rape our young girls but Violet gives willingly.
OK, I don't know what scares me more:
The fact that these guys are using what looks like their kid brother's woodburning kit as a soldering iron (just look at the size of this thing compared to the size of the pad they are working on), the fact that they didn't prepare the coax (tin the leads) BEFORE they put it into place, or the fact that they are blithly ignoring the part 15 regs which DO NOT ALLOW an external antenna to be installed on a device like this.
Oh, let us not forget that the cable they are using is not rated for the Bluetooth frequency range, and will have a pretty significant attenuation at those frequencies, that the connectors they are using will not have a good impedance match at Bluetooth frequencies...
www.eFax.com are spammers
Fantastic. You've just invented a brilliant 802.11b and g jamming device. This thing should prevent the use of WLANs within a fairly significant radius. Although it uses FHSS, it will appear as all band noise to a DSSS system like the 802.11 2.4GHz devices. Why do you think there are already workplaces with "No Bluetooth Allowed"? And thats just for the short range bluetooth devices. Boosting the power on one of those things just aint clever.
"They looked deep into my soul and assigned me a number based on the order in which I joined"
LMR-100 *is* microwave cable, and N connectors are suitable for microwave.