Shaking Hard Drives Instead of Spinning?

Twyko64 writes "A UK startup called Dataslide aims to develop 'hard drives' made of oscillating sheets of LCD-screen-like material with piezo-electronic actuators and many, many read:write heads. A 'hard drive' could be the same size and shape as an LCD screen. I wrote a this piece on Techworld about it."

Comments

Meh...

[krymsin01]

While I appreciate innovation, I think companies should really try to improve the current state of solid state storage devices. Obviously, no moving parts mean fewer points of failure. Also, other than saying that these devices could theoreticly be better than current spinning disks and flash memory, this article is pretty scant on hard specs about the tech. I guess it's way too early for them to release such information, but I'd like to see some specs on it. Like how they are going to cancel out background noise vibrations. Seems to me like this technology would be very exposed to faults due to things like that, perhaps even small vibrations due to loud noise/etc.

Seems like a old storage drum that doesn't spin

[shoppa]

Before we had disks (I'm talking about the 1960's), the ultimate in storage was the drum. It was a few feet long, spinning at hundreds to low thousands of RPM, and usually with fixed heads (a few dozen to a few hundred, typically).

This "new drive" seems to have all the disadvantages of a drum, plus another: it doesn't spin. Instead it just shimmies back and forth.

Well, maybe the new magical material will handle this OK. With the old drums, spinning them up often took several minutes because of the huge inertia (weight was often in the hundreds of pounds for the bigger ones... disaster when the bearings seize and the drum smashes through brick walls!)

Re:WTF?

[Wyatt Earp]

I think this works by someone with a nothing story putting a link to it here and so people click through and huzzah! Hits come a rolling.

And wow, that is a poorly written article too.

"For lovers of irony we might note that this feature is about shaky technology. But don't knock it. Hummingbirds hover, they hang in mid-air, because of their vibrating wings. The apparently impossible can happen. A violin's shaking strings produce music. "

It was like, shaky...humm, Word Thesaurus, give me shaky words to use and I will use them all in my closing.

It's interesting, but won't improve anything.

[Artifakt]

The idea seems to be that a vibrating sheet could move, while a grid of read/write heads could stay in place, just so something moves to generate a changing magnetic field. While that's certainly true, a spinning disc could also have mutiple heads per arm, multiple arms per disc, and so on. Getting a closely packed array of read/write heads is an equal challenge in either case, and having the surface move continually in the same direction is much easier than having it oscillate.
This would affect what shapes a drive could be manufactured in, but that's unlikely to matter enough to make the idea catch on.

You think hard drives are noisy now?

[earthforce_1]

I can just imagine the racket this thing would make. As shake velocity increases to reduce seek time, so will the inertia of the object being moved. Your laptop would take on a life of its own, as it bounces across the desk like a thing posessed.

Re:Hmm

[dgatwood]

That's a rather problematic comparison. I've only had one or two very cheap power supplies (wall warts) fail because of a coil going open. Not a single short ever.

More often than not, power supplies fail because of the fact that they are the first line of defense against the electrical supply with all its surges and spikes. Those spikes cause damage to capacitors and voltage regulators that builds up over time until the part fails. The result is that the power supply ends up delivering the wrong voltage (usually higher than desired on one rail, lower or zero on another) and often pulsating DC.

I've only had two computer PSUs fail. One of them went open on the output, but both coils of the transformer seemed to check good. (I didn't pull it out of circuit, so I can't be certain, but the resistance seemed reasonable.) The other one shut itself off repeatedly. After analysis, it was hitting a thermal cut-off because the fan had stopped spinning.

I've had many laptop power supplies fail, but that's always a cable break or short. I have had three such supplies replaced and a fourth that just started sparking....

Never a single case of a coil shorting. A coil shorting would just result in a voltage drop if it happened on the secondary or a voltage boost if it happened on the primary. It would take a very serious short before you noticed it, unlike motors where a short often means that the motor won't have enough strength to start.

More than that, the part of a hard drive that fails is almost never the motor. It's usually something stupid like a bearing leaking oil all over the platter or a head sticking somewhere and then either gouging the platter or snapping off and then gouging the platter.

The real question is whether micromotive hard drives would be more reliable than spinning ones. Depends. How are those devices lubricated (or are they lubricated)? What prevents a head crash? I assume that the heads aren't supported by a cushion of air, which would be an improvement, but beyond that, they still have the same potential mechanical issues, only now there's more than one or two heads to deal with. The more heads, the more interconnects, and thus the more potential points of failure.

This sounds an awful lot like probe-based storage. If it is, the advantages are in terms of increased density, not increased reliability. We won't know about reliability until those things are widely deployed. Until then, it's just conjecture.

Just my $0.02.