Slashdot Mirror
Your DIY Arcade Machine?
astro_ripper asks: "I'm looking into building my own MAME (Multiple Arcade Machine Emulator), and for the most part the equipment and know-how to build one can be found via our good friend Google. However, the number of webpages dedicated to showing off complete machines or other gaming hardware hacks (turning an XBox into a full MAME, for example) are a little lacking. My guess is that if any group is going to have a decent amount of gaming hardware hackers, it's going to be Slashdot, so I ask you all: What type of custom gaming rigs have you built?"
I think you were looking for "Ask A Slashdot Editor"
-> http://cmdrtaco.net/jubei/
I went to a company called Game Cabinets Inc. and purchased their plans and some supplies for 2 person cocktail cabinet. I ordered almost every electronic part from them with the exception of the Coin Door. I live 20 minutes from Happ Controls and got my last parts, including the door from them.
The plans I got were pretty darn good and has a great checklist for supplies. It took me roughly two weeks to get the cabinet built from scratch. I move it inside and then proceeded to do the electronics and wiring - very tedious. I would highly recommend going to Radio Shack and purchasing the the little wire labels to keep it all in order.
This was definitely a blast to do and I like the fact that I built it from scratch. That said, if you have the room build an upright. You can put more controls on the board which means you can play a variety of games. If you go to the Game Cabinets Inc website you will see the cocktail table that I built.
Arcade Controls website is the place to get all of your information as well!
Q: I am short, useless and provide no value. What am I? A: a sig
i bought the cabinet, and built the insides. the monitor board and monitor were included, but it didn't have any joysticks, buttons, or coin acceptor.
i put a pc in, bought a j-pac from http://www.ultimarc.com/ and loaded up my mame dvds. it was done in a day, but i still had an amazing feeling of accomplishment.
http://psg.com/~jjohnson/arcade.html
I and a few of the people in the fighting game comunities I frequent build our own joysticks. While I stick to modding existing sticks for the most part, this guy http://www.byrdo.org/arcade_joysticks.htm does some great work. Treat her gently, though slashdot. I'd hate to fry his server.
The eternal struggle of good vs. evil begins within one's self.
I think this is the best site out there
http://arcadecontrols.com/arcade.htm
there are a ton of examples
Slasdot English Lesson: "a lot" not "alot" and "no one" not "noone"
The important thing is the buttons and the joystick piece. Get six buttons or whatever you think you will need, and a four way joystick (NSEW). These can be found on eBay or arcade supply stores online.
Now what amount of hardware hacking is this going to take? Which USB driver should I use? What interface should I pick? Hehehehe.
Go to your local Target or eBay or BestBuy and get one of those clone console controllers with the two analog sticks, the D pad, buttons and a USB interface. Rip that sucker apart, leave the USB cable intact and don't mess up anything on the PCB (in otherwords, rip the case off the PCB). Note that all the buttons and the D pad go to little traces on the PCB, which work with membrane buttons. The arcade game buttons and the joystick are simple on-off switches. So are membrane buttons. Solder those old skool buttons and joystick to the contacts on the PCB of the clone controller where the membrane buttons were. Solder the joystick up down left right to the corresponding contacts on the D pad, and wire the arcade push buttons to the contacts on the PCB where the right hand buttons were on the clone controller. Wire the R1 and L1 buttons in also if you want 6 puttons (think street fighter emulation). No we don't get analog sticks or vibration, but most old emulated games don't use them anyways.
You have basically replaced the membrane contact switches with your old skool arcade switches (buttons/joystick). The controller, USB interface and your PC won't know the difference, it's just a switch being closed!
Put it all in a nice heavy wood container you built, run the USB cable out the back (or in your upright cabinet if you are really going for it). Plug it into your pc and install your drivers for windows that came with the clone controller, or in Linux configure a joystick device. Fire up mame, and you are all set for the price of the controller ($20) and the joystick and buttons, plus some knee grease for the box and soldering. mame thinks it sees a logitech rumblepad or something similar, you see a box with an old school joystick and buttons and a cable coming out the back. But you won't need any quarters. Enjoy.