Slashdot Mirror
Creating a High-Tech Meeting/Conference Room?
papaia asks: "As the network geek in my company, I have been tasked with defining a high-end, fully connected and extremely easy to use conference room, for our CEO, who is your classic non-computer-using person. The requirements are to accommodate 'local' (to the conference room) meetings, as well as interactive sessions with people in other locations, allowing him to discuss/debate various product solutions, on files being opened and available to him to pinpoint issues, without the knowledge of the underlying software used to create them (e.g. CAD drawings where he could make annotations, etc). Do any of you have recommendations for building the 'meeting room of the 21st century'?"
"The solutions I have been looking into, so far, range from various types of whiteboards (Panasonic's interactive whiteboard, or SMART board one), to interactive displays, and software such as Netmeeting, or Cisco's meeting place.
I obviously need to combine any or all of the above with some capability of video (of course), thus I am looking into various webcams, and conferencing capabilities in some equipment - the latter is yet another challenge (VoIP or not?!?). I have also looked at meeting room suggestions, and I cannot really make up my mind."
I obviously need to combine any or all of the above with some capability of video (of course), thus I am looking into various webcams, and conferencing capabilities in some equipment - the latter is yet another challenge (VoIP or not?!?). I have also looked at meeting room suggestions, and I cannot really make up my mind."
Yes. First, make sure that he's willing to actually spend money on this. Once you're past that hurdle, order something like a Tandberg 6000, and a dedicated T-1 line. Install the Tandberg in the conference room, and install either two large projection screens, or large plasma display units along with it. This will allow you to have the main conference on one screen, and a presentation on the other. Make sure that you have equipment at the remote end that is simmilar, or appropriate to the remote end, I.E. for a small office with 10 or so people, a portable Tandberg 1000 should suffice. For a large office, you'd need another 6000. The small remote officess can likely get by with a fractional T-1, or multiple ISDN lines, since each video connection only needs like 384k symetrical to work. YOU need the T-1 has the hub, and if that becomes insufficient, you can upgrade that to a DS-3/OC-3 type link pretty easily.
But this is slashdot. A slashdoter who didn't build his own computer is like a Jedi who didn't build his own lightsaber!
I highly recommend using Polycom's line of webcams.
They feature video auto-tracking (camera follows you) as well as PC integration. Using the H.323 standard, these webcams can connect with Netmeeting, Gnome Meeting, other webcams, and much more allowing you to offer conferencing to a wide range of people. With the PC integration you can share your desktop with your client while holding a steady conversation. H.323 also transmits voice as well elimating the need for phones. In our experiences, however, the clarity of voice is not as nice as a standard telephone call over a speakerphone. The unit will plug into either a monitor or television and can be connected directly into an ISDN line or assigned an IP address to receive phone calls.
I'm a virgo and on Slashdot. Coincidence? Yes.
I do this for a living. Don't screw around with netmeeting or skype or any of that stuff. If you want the meeting room of the 21st century - it's going to cost you. I suggest you get demos of Polycom (the VSX series, not the iPower that's PC based) and Tandberg systems and decide which one is best for you. Polycom offers particularly good microphone and echo cancelling technologies. These systems also offer dual stream technology for sending video and high res content pictures at the same time. For that you need two indepenent front screen projectors with independent control systems from someone like Extron - or control them both with AMX or Crestron - but keep them logically separated in the menus for the user.
Document camera, DVD/VCR and good audio reinforcement.
Make the entire wall a whiteboard. Here is the first thing I found on Google. I'm sure there are more. When I visited Emerson Process Controls recently, they used something like this in their training center. The instructor could draw anywhere, as long as it was on the correct wall.