Slashdot Mirror
Organizing Computer Gear Clutter?
slashyslashy asks: "At first I had only a PC and a printer. Now the home network setup has grown to consist of many units: linksys router, ASDL modem, Vonage VOIP terminal, linksys NSLU2 network storage device, and couple of external harddrives. Powering all these units is done with three Belkin 6-Outlet Surge Protectors all connected to 1 wall outlet. Currently all of these units are stacked under the table, causing their wires and cables criss-cross each other. Troubleshooting any single unit is a mess. How do other Slashdot readers organize their home computer gear? Any ideas on cheap solutions ($100) to manage this clutter?"
1. Cable ties
2. Masking tape to label the cables in the ties.
You can get cable ties anywhere (Lowe's, Home depot).
GOBACK.
When I lived in an apartment, I contained a lot of the network clutter in a milk crate. Get a milk crate and a bunch of cable ties from a hardware store.
y ellow.jpg
Zip tie one of your surge strips inside of the milk crate, along with your router and your cable modem. All on different sides. Hook them all up together and use more zip ties to bundle up the cables between them.
Now put the milk crate on the floor, with the open side down, and stack more stuff on top of it. This means you not only get rid of the desk clutter from your cable modem and router, but you now have a printer stand as well. And a couple of headless boxes can get put there, too.
Here's my old setup.
http://www.roadflares.org/hardware/images/blueand
Worked well.
--saint
* Label your power cords for what brand, model and possibly power draw.
* Use zip ties or velcro ties to "bundle" cables that can be bundled (power cables, for instance.) Don't bundle cables that could potentially cause crosstalk/noise (ie, no audio cables running next to your power.)
* "Hang" cables and route them with slack, with regards to servicing or pulling out the devices. In general, you should have enough slack to pull out and examine the back of a device without having to unplug it beforehand.
* Another poster said this, but don't overload power sockets; if necessary, route another powerstrip to a second socket. Or look into a UPS/true power solution.
Not All Who Wander Are Lost
... was to just get rid of a lot of equipment. Some was sold, some thrown away, some stuff is boxed up in case I ever need it again.
I sold off a couple of desktop machines and consolidated one good one, shifted a file server off into another room, went wireless where I could (though I've since rewired the main desktop box for network) and generally tried to cut down on clutter (like unplugging some rarely-used peripherals such as joystick, drawing tablet etc, getting a wireless keyboard and mouse with a decent battery charger).
I also fixed two powerboards and a network switch to the underside of my main desk, and shortened some cable runs so the cables were up off the floor. The long cables now serve a more useful purpose with my guitar and bass amps.
Turns out I'm a lot better off, though the clutter is inevitably going to build up again.
Oh, and I also rely more on my laptops than I used to, which is a factor in cutting down on the static hardware, I suppose
Screw you all! I'm off to the pub
75' rolls of velcro cheap! And in colors too!
I've never been a big fan of the long tubing ones. I use this technique on all of my KVM cables. So the three cables act like one. It's pretty slick.
For cables that are more like to change, I use velcro wraps available at any Office Depot or Office Max. ~$3.00 for a dozen.
Kirby
The twisty ties used to seal some plastic bags. Available at any supermarket.
retrorocket.o not found, launch anyway?