Slashdot Mirror
New 1 Kilowatt PSU - Too Much Power?
Steve from Hexus writes "While at the GC 2005 gaming convention in Leipzig, Germany, Hexus.net encountered a new 1kW PSU from Enermax, called the 'Galaxy'. At peak output it will use 1.4kW of mains power to provide a total of 66 amps across its various power rails. Who will actually have a need for this PSU, and when this amount of power is being consumed, shouldn't we be thinking about redundant power systems (or perhaps energy efficiency) instead?"
550W will handle a dual core Athlon, dual 7800 GTXs, 4 SATA drives, 2 optical drives, and a decent number of case fans, at peak load.
I guess, since you specified Intel, you might need an additional 100W, but thats still just 2/3s what this thing outputs.
Hunt your preferred prey at Aliens vs Predator MUD. Join the war at avpmud.com port 4000
It's no where near as exciting as it sounds. Right now I have a regular 3-axis mill with a rotary table as a fourth axis. The steppers draw up to 3A per coil, making 24A total. My fifth axis would be a second rotary table mounted 90 degrees on the first. It would make really nice chamfers without changing tools.
Do we need 1KW PSUs? no. I don't think so.
Generally, when I buy an overpowered PS, it's because I need a particular amp capacity on one of the rails. So I need a 550W PS for an Athlon 1.4Ghz box that probably draws 200W. This was because only the 550W model had the proper rating for +5DC.
"We returned the General to El Salvador, or maybe Guatemala, it's difficult to tell from 10,000 feet"
not as much as you might think.
HDD Power consumption
IDE/SATA drives only draw about 7-13W Idle/read&write, 15K SCSI drives a bit over 20W read&write.
Spin up might be a problem, but I'd assume you'd want to use cards that supported staggered sinpup on a setup that large.
So, yes 16 HDDs can pull quite a bit of power, about 300W for top end SCSI solutions. Though you wouldn't be thought of as particularly bright if you entrust a setup like that to a basic quality desktop PSU. And the quality of supplies you'd be using with a high end storage array like that (ie something in the N+1 redundant Zippy line) have been availible at well over 1000W for a while.
I think a 1000W PSU in a standard EAXT setup is massive overkill. I really have a hard time thinking of a workstation / stand alone server setup that would be too much for quality 500-600W PSUs to handle right now.
Anandtech reviewed a 4 CPU dual core Opteron setup from SUN while back, it only drew about 600W.