Slashdot Mirror
Digitizing a Large Amount of Photos?
mcj0422 asks: "With what seems like the many increasing disasters, and also the freak accidents that can happen, there are certain non valuables that people end up losing, the main one being pictures that are printed on film. I know my mom has several thousand photos in our basement, which could be wiped out by water damage in one heavy rain season. Are there any scanners designed to take loads of pictures and turn them into digital files? Is there a service that does this, if so which ones would you recommend?"
I know this is over-budget for pratically everyone, but I just have to share.
My workplace recently replaced our venerable Fujitsu 4097D scanner. We ran hundreds of thousands of sheets through that thing, and it never needed service beyond my unskilled labor and Fujitsu's ScanAid consumable kits. But when the lease ran out, we chose to replace it with a color model.
Since the 4097D worked out so well, we looked at two of the current Fujitsu models. Both of these scan up to 600 dpi x 24 bit color (optical) and have hi-speed USB2 and SCSI interfaces. Both have flatbed capability in addition to the ADF.
The successor to the 4097D is the fi-5750C. It's roughly $6,000 and has a duty cycle of 8,000 pages per day. (They call that a "light duty" scanner, which cracks me up.) It also has a clever rotating 200-sheet 57 PPM ADF unit that makes it easy to use for both right- and left-handers. It can scan up to 12"x18".
The model fi-4340C is a bit more reasonable, going for about $3500. It can handle a slightly less huge variety of paper, and has a duty cycle of a mere 3,000 pages per day. It has a fixed 100-sheet 40 PPM ADF. It can scan up to 8.5"x14".
We purchased the fi-5750C. The hardest part of the installation was getting it upstairs... it's bulky and almost 80 pounds. Once I had it running, I took a small stack of mixed-size photos and dropped them in the ADF... it handled them wonderfully. Obviously a 600dpi 24-bit scan doesn't run at 57 PPM, but it's still pretty quick and it produced very nice-looking scans. Most importantly, the ADF didn't damage the photos.
One of these weekends I'm going to bring in a portable hard drive and a box of photos, and see how many gigabytes I can fill up in a day.
---
On a more realistic level, here's a couple things to keep in mind. First, scanning a photo print is making a copy of a copy. If you have access to negatives, try to scan them instead. I have no idea what equipment does that well, but I expect it's very expensive. It's probably best to work through a service for that.
Second, digitizing is the easy part... indexing is the hard part.
With reasonable men I will reason; with humane men I will plead; but to tyrants I will give no quarter. -- William Lloyd
HP Officejet 6110. Automatic Document Feeder, decent scans, and under $800. Just don't walk away and leave it scanning or it'll do 3 pages at once and jam. We've used them for over 10000 pages where I work.
But really... If you have the negatives, always scan those (with a filmscanner) rather than prints. Prints almost always have less information than the negatives, and deteriorate faster. A good enough filmscanner (if your slides and negatives are dust free) should only cost $250 if you need to scan only 35mm. One that can handle 35mm and medium format, with dust and scratch removal will cost ~$900.
And get VueScan. Having to manually save each image in photoshop really really sucks when you've got a few hundred images. VueScan saves directly to file, rather than sending the images back to an interactive program. And it works on Linux, MacOSX, and Windows. Watch for scanner compatibility though... the CanoScan models need drivers not available for Linux, but the Epson, Nikon, and Minoltas work in Linux.