Slashdot Mirror
Power, Water and Refrigeration in One Box
Roland Piquepaille writes "Engineers at the University of Florida have developed and built a system that can provide power, water and refrigeration from a single unit. This project, funded by the U.S. Army, will lead to units small enough to fit inside a military jet or a large truck. The prototype system is already more efficient than conventional turbines. And it is also environmentally friendly because it can use traditional fossil fuels as well as biomass-produced fuels or hydrogen and releases only small amounts of pollutants. This kind of system could be used as a mobile unit in case of hurricanes or wars. But it might also be connected to the normal power grid in fixed locations."
Here is a link to a picture of the device and a professor who I assume worked on it (or at least took credit for it).
*shakes fist*
. . .this would be a boon to developing countries, allowing people to get off the often-unrelieable power grids. . .
Small community sized, multifuel turbine based power generating plants are already perfectly available on the market. They used to make them just a few blocks from where I'm sitting right now. There is not and has never been (remember, once upon a time in the electrical age it did not yet exist) a need to be on a national grid just to get electricity. You can make your own if you want.
But the world bank does not finance local community projects in third world countries. They finance massive power dams with American equipment and labor, sucking said country dry of financial resources and reducing independence.
Why yes, it is a conspiracy; and a very effective one.
KFG
This technology has been used on ships for years.
For those of you old as I am, remember the old Arkla-Servel Gas Refrigerators? They used a very similar absorption technique, with all gravitic pumps. No moving parts except the door. Beautiful design. Some camper refrigerators still use the technology. They use an ammonia-water-hydrogen mix in the absorber.
These things work very similar to those athletic "cold packs" that get cold when they are mixed, except in this case, the active ingredients are looped back to be separated by thermal processes then remixed in an endless cycle. This is an oversimplified explanation, but its roughly how they work. In the far more efficient absorption process, a hygroscopic absorbent is used in lieu of a compressor to effect the pressure differences required for the phase changes responsible for the heat transfers.
In a Lithium-Bromide system, the process runs at a vacuum so the boiling point of water is below room temperature. By doing this, the actual refrigerant is plain old simple WATER!
Very environmentally friendly. In the event of a rupture, you lose vacuum and the system stops working. No explosions or smelly spraying as an ammonia-based system will do.
Why do I know about this? For those of you who have read some of my previous posts, I used to work at the Chevron Pascagoula Oil Refinery. It was the first job I had. We had a absorber unit over there which we used to keep our LNG tanks cold, using nothing more than waste heat from the refinery. I was fascinated as hell by that box, which looked like nothing more than two large pipes sitting one atop the other, one was hot, the other cool, while the LNG tanks were cold.
This was in the early 70's, and it was "old technology" then, but fascinating as hell to me. Luckily, when I let the management at Chevron know I found the thing so interesting, they put me in charge of it and I could study it to my heart's content.
And why am I posting here? I am very frustrated.
Over 100 people have just died during this latest heat wave to hit Southern California. I want so bad to start work on building another absorber, much like the one at Chevron, but I want to put the Generator unit at the focal point of a linear parabolic reflector, oriented East-West so it will track the sun without having to move it, and get the Sun to power the whole thing. So the hotter it gets outside, the colder it will get inside. I want to use those brand new "Segmented Electro Magnetic Array" motors they are developing for washing machines to give me fine control over the refrigerant pumps so I can track out variances in insolation and loading so I can keep the fluids balanced in the system. There is a lot of work on programming AVR microcontrollers so the system becomes intelligent enough to make the most cold as the system parameters vary.
In short, I am old, have the stuff on how to do it in me, but don't have money to do it, and don't have the energy any more to commute and make pretty for the workplace. This is something that if I do it, I am going to have to do it on my own house so I don't have to spend all my energies making presentations, looking pretty for the management folks, and useless commuting.
Its frustrating to see how frivolously we - as a society - spend our existing resources. Here we are, burning through our fossil oil - which will never be replaced - at a rate of 85 million barrels per day. Investment bankers, IP lawyers, executives, etc are "earning" more money than I will see in a lifetime, yet my dreams - as an engineer/scientist - will never see the light of day due to my lack of "people skills" which are required by the executive corporate hiring manager... and I have no idea how to get one of those "grants".
And yes, it will probably take several million dollars to make the first one, as I will have t
"Prove all things; hold fast that which is good." [KJV: I Thessalonians 5:21]