Slashdot Mirror
What Micro-Controller Would You Use to Teach With?
Rukie asks: "I'm looking into starting some sort of robotics class for my high school, which severely lacks any sort of technological classes. I am now wondering what micro-controllers are best for an educational environment. I definitely want something more advanced than the Legos, but something that won't fly over people's heads. Are there cheap, scaleable micro-controllers for learning in a classroom or at home? I'm curious how my fellow readers have hacked up toys to make their own robotics at minimal cost."
Check out http://www.parallax.com/ and their Basic Stamp series. They have a wide range or processors and great educational programs based on them. The also have robots and robotics based programs based upon the Basic Stamp.
AVR, and WinAVR (AVR-GCC) for the win.
I like the Brainstem from Acroname. I haven't done any big projects with one, but I've played with a couple and they definitely hit the spot in terms of easeability, powerfulity and economicalness. I've used the SV203 from Pontech in the past and it's a solid & simple board. Great if you're keeping the board tethered to a computer and not doing any actual processing on board. Brainstem gives you a little/lot more high level power.
I would go for PIC: they are cheap, programmers are available everywere, free assembler/IDE and net is full of information. Yes they are stupid small ram devices, but also very easy to use.
The Make magazine featured the leafproject recently which uses a custom board [2] for their "open source robot using artificial intelligence and vision"
The 6808 micro-controller (long version of the name is M9S08GB60) would be excellent for teaching a class on robotics. As its been around since the dawn of time, there's a lot of support readily available for it. Complete, detailed reference manuals are freely available, Freescale will even ship printed copies to you for free. Compilers are available that allow you to program in your choice of assembly, C, or C+. The "M68DEMO908GB60" demo board is available from many online retailers for around $50 which makes it easier to use the microcontroller for prototyping as well as experimentation and class labs.
f
What lends the 6808 microcontroller is its Pulse-Width-Modulation components (it has 2 modules, one with 5 channels and the other with 3 channels and all channels can be set up for either incoming our outgoing). In addition to all that it runs up to 40MHz without cooling and includes 4K of RAM and 60K of ROM all on-die, so no extra chips for those. It has more power than you could ever hope to use in a class-room.
A good example project is available here: http://home.comcast.net/~starwreck/FinalReport.pd
... and in the DRM, bind them.
PIC is a braindead horror show architecture from the 70s, and Microchip's microcontrollers are the hardware equivalent of spaghetti code, built with kludge upon kludge.
Go with a simple yet elegant architecture, as it will teach good design practice. With PICs these kids will spend a lot of their time writing tricks to compensate for the hardware's flaws, and may get the impression that programming amounts to writing "clever", unmaintainable code.
Avoid the frustration and go with the AVR lineup. If you want to showcase a traditional design, introduce them to the 8051 (but don't necessarily have them in the lab). If you need more features, use the Freescale HCS12 with the GCC toolchain (coding in assembly for the HCS12 isn't practical, since it essentially implements the old fashioned, register starved 68HC11 instruction set). And if you want performance for higher level applications (which may not be the case), go with an ARM part.
I'd go with Atmel AVRs.
They are widely used, well documented and well supported.
There are a large range of chips with a consistent instruction set, so they can learn on a simple eight pin 1-Kbyte chip and then apply that knowledge the next day on a large 32-pin 16-Kbyte device.
They are extensively used in industry so students can feel like they are learning something practical.
I'm personally using this : http://www.robominds.com/ There are good available libs for robotics purpose : http://www.motorobots.org/ I also saw others recommending the parallax which might fit better in your budget
This is basically what the Picaxe microcontroller series was made for. Their website is at http://www.picaxe.co.uk/ and a reseller for them in the united states is located at www.phanderson.com. It is basically a PIC microcontroller (they use various models, from 8-pins to 40, so the scalability factor is there), with a custom ROM flashed onto them that has a BASIC interpreter. Think of a Parallax BASIC-STAMP, only all in one chip, and the chips range from $3-10 for most of them, so its almost as cheap as you can get it. Additionally, the BASIC software development environment is free to download, has no limitations, and is geared towards an academic setting (it even includes the ability to draw out simple logic circuits and have it convert them to basic code). Also, THEY DO NOT REQUIRE A SEPARATE PROGRAMMER. To program a PIC normally, you would need a ~$50-100 programmer for each student, but these hook directly up to the serial port (a cable is just 3 wires coming out of a DB9 connector), so each student can easily reprogram their own, or even do it from home. They're incredibly versatile (check out the forum at their main site), and perfectly suited to academic use, for both younger and older students
I'm perfect in every way, except for my humility.
If you want to start off with C, I recommend the AVR Butterfly.
You can get an AVR Butterfly http://www.atmel.com/products/AVR/butterfly/ for $20 at digikey... it comes with an LCD screen, a five way joystick-like button, a speaker, some sensors, RS232 level converters, and an ATMega processor. To program it, you just wire up an RS232 plug to the board and download the C/Assembly compiler from their web site. GNU tools for this are also available. No specialized programmer required.
The advantage of a board like this is it's quick. You don't need to wire up a micro with an oscillator and some output devices. You don't need a special programmer. You don't need to buy a C compiler. It's all there, and $20 is fairly cheap. If the kids like 'em, they can buy their own for home.
If you want to start off with something easier, like BASIC, the BASIC stamp seems like the way to go.
Good luck!
100% agree. Microchip's products are really great as they do a range of devices from cheap and simple devices up to quite complex ones. They are fun to use and quick to learn - sure, in the real world, high level languages like Java are desired by employers, but these are so abstract that you don't get a feel for the actual workings of the computer. Its vital that people understand how the actual machine works, and there's nothing like a bit of assembler and some flashing LEDs and push buttons to do this.
First off, I'd dump any mention of 68hc08, 68hc11, 8051, z80, etc. There are more of those doing more than you would ever believe out there in the world, but it's like suggesting that someone learn GUI programming by giving them an 8086 with dual floppy drives and 256K of memory, and a copy of Windows 1.0. Time has passed them by; learning the quirks and tricks necessary to get them running happily is more an exercise in dedication in the modern world than any way to learn modern processing./ edu_base.php LPC2148 Education board on my desk at the moment. It's a bit pricey at 99 EU, but without all the motors, LCD and LED displays you can get the basic board http://www.embeddedartists.com/products/boards/lpc 2148.php a bit cheaper.
/frank
As a professional embedded programmer, I'm quite surprised by the number of recommendations for the AVR in this thread. I've never used it, but I may have to look into it. Quite a rabid following there.
I would recommend getting into ARM. In the professional world, they have pretty much taken over the middle ground of 30-200 MHz 32-bit processors, especially in the custom-chip arena.
With the NXP (nee Philips) LPC versions, you can have a 256KB FLASH/32KB RAM device with a USB port and a million on-board peripherals for the cost of a $10 chip (Digi-key quantity 1), a PCB, and a crystal. Pre-built development boards are a dime a dozen; I'm partial to the http://www.embeddedartists.com/ boards, and happen to have their http://www.embeddedartists.com/products/education
ARMS are extremely well supported by the excellent GNUARM toolset (http://www.gnuarm.com/), giving you a completely free C/C++/Assembly toolset, and there are a huge number of sample programs available from Embedded Artists, Keil, Olimex, etc., for doing almost anything you might want.
Why teach them about code pages, completely screwey function call mechanics, 256 byte jumps, limited capability C libraries, etc., when they could be learning about putting their name on the display, spinning a motor, playing a tune, and shipping data up to a PC over USB?
And the worms ate into his brain.