Slashdot Mirror


Can You Run an Open GSM Network?

OpenCell asks: "Here in Vancouver, cellphone companies are charging ridiculous amounts for basic cellphone plans. I'm wondering if it's possible to run an open/almost free GSM network on a small college campus. Assuming we could find the hardware and get the rights, is there open source software out there to handle most aspects for something like this?"

8 of 51 comments (clear)

  1. Frequencies by HaeMaker · · Score: 4, Insightful

    To run the GSM network, you need frequencies in the right range, you'd have to get phones tuned to that frequency and a license from the FCC (Vancouver, WA) or the Canadian equivalent (Vancouver, BC).

    You might be able to use 900Mhz or 2.4.Ghz, but you still need specially made phones and cells, and coverage would be poor.

    I don't think amateur cell phones are possible.

    WiFi phones may be possible, but coverage would be bad.

    1. Re:Frequencies by PlanetMan · · Score: 4, Informative

      Before choosing GSM or any other type of air interface (GSM, CDMA, TDMA, AMPS, DECT, PHS, ad nauseum) you should consider your requirements. If offering telephpony service over a limited area to slow-moving terminals (like pedestrians) is important, WiFi or WiMax or other technologies might offer sufficient capabilities to meet those needs.

      GSM and other multiple access (the "MA" in CDMA and TDMA) technologies impose a high cost to provide mobility that must scale from pedestrians to automobiles and trains, etc., moving at 200 kmph and faster. This cost is for hardware and software in HLR, VLR and BTS components and others.

      If your requirements do not require high-speed mobility, meaning you target terminals which move at human speeds around a limited geographic area like a campus, investigate limited mobility solutions using unlicensed spectrum such as WiFi and WiMax, and using off-the-shelf and Open Source technologies.

      You may have to build from the ground up, but as a university your labor pool should be relatively inexpensive, and hardware, too, should be affordable.

      Good luck. Please remember to let the readers of SlashDot know what you choose to implement, and your experience doing so.

      --
      TeleTips Network Help for Telecoms Profes
  2. Most Likely, no by williamyf · · Score: 5, Informative

    Aside from the red tape, and all such crap there are a few solutions that will allow you to have a MSC+HLR+BSC+BTS but will not scale well, and since , OpenSS7 is barely usable, if at all, there is no way to scale.

    oh, and forget about roaming to your local provider when not in coverage if you do not sign a roaming agreement (highly unlikely).

    Grab a phone from nokia or others that dose the wi-fi to gsm trick, use voice over IP to lower costs, deploy a comprehensive wi-fi network in your campus, and you will be better served...

    Oh, and by the way, six years of experience in the second (734-02) GSM operator in Venezuela (in the telecomms area, just in case someone was wandering)

    http://www.digitel.com.ve/

    --
    *** Suerte a todos y Feliz dia!
    1. Re:Most Likely, no by Paradise+Pete · · Score: 3, Funny
      (in the telecomms area, just in case someone was wandering)

      That would be covered by the roaming agreement. ;-)

  3. Neat Idea, But From Whence The Frequencies? by cmholm · · Score: 4, Insightful

    The idea of an open gsm network would make for an interesting real world pilot project. Unfortunately, just about every nation considers the radio bands you'd normally want to work in to be big buck$. The parent Canadian poster can do a quick Google search regarding frequency assignments in her/his nation, and it's the same situation just about everywhere. You'd be charged a huge sum to license the bands, and/or an additional sum to be licensed as one of a limited number of com providers on those bands.

    Theoretically, you could try this on - say - the ISM bands, but they aren't going to give you the same performance as the cell bands. In addition, purpose-built cell equipment isn't designed nor licensed to operate outside of the cell bands, so you'd have a lot of DIY on the hardware side. Not so bad on the provider side so much as on the user side... where're you gonna get the handsets? Yes, there are ISM YoIP handsets, but they aren't really set up for portable use. While ISM ain't what you asked for, it's really all you have available.

    --
    Luke, help me take this mask off ... Just for once, let me butterfly kiss you with my own eyes.
  4. picocell by metoc · · Score: 3, Interesting

    The GSM spec allows for a type of cell called a pico-cell. Pico-cells are very low power and allow your cell phone to act like a cordless phone, and route calls throught your landline. Never seen one in north america, but I think Nokia offers it in Europe. Problem is different frequencies and I think it needs an ISDN connection.

  5. Ridiculous Amounts? by SKorvus · · Score: 3, Informative

    Fido http://www.fido.ca/portal/en/packages/monthly.shtm l
    Unlimited incoming: $25
    Any time: $20
    Fido to Fido: $25

    Telus http://www.telusmobility.com/bc/plans/pcs/index.sh tml
    Talk a lot 20: $20
    Urban Talk 30: $30
    Or there's their prepaid plans which can be cheaper if you don't call much: http://www.telusmobility.com/bc/plans/payandtalk/i ndex.shtml

    Rogers/Cantel http://www.shoprogers.com/store/wireless/services/ plans_and_options.asp
    MegaTime from $20

    I'm not sure how much you expect cellphone service to cost; but $20-30/month (note each plan has a system access fee of about $8) is pretty reasonable, and many offer free or cheap phones.

    --
    Live simply, that others may simply live. -Gandhi
  6. DECT by ceroklis · · Score: 5, Insightful
    The short answer is no.

    GSM is not designed for private networks, so forget it. What you want is DECT. DECT is a standard for cordless phones. It scales from a single cordless phone connected to a fixed line to business systems that cover a whole campus and connect to a PBX, making it easy to integrate to your existing infrastructure.

    You can find dual DECT/GSM phones that seamlessly switch between the two networks. Here is a example of a DECT solutions vendor, which has a full range of offers: http://www.diacom.ie/kirk.htm.