Current Recommendations For a Home File Server?

j.sanchez1 writes "The recent coverage of Shuttle's new KPC has gotten me thinking (again) about a small, low-cost headless file server for home. In the past, I have looked at the iPaq and considered using older computers I have lying around, but for various reasons I have never jumped in to do it. Do you guys have any suggestions on what to use for a home file server (hardware and software)? The server would be feeding files to Windows PCs and connected to the network through a Linksys WRT54GL running DD-WRT firmware." There are a host of good options these days; what has the best bang for the home-user's buck?

Comments

Cheapest, best way is to build it

[ajs]

I went to newegg and just built the system from scratch. I got 5 SATAII 250GB disks (the sweet-spot at the time for price per MB) in a tower with a run-of-the-mill motherboard, CPU and RAM. I didn't go headless entirely from the gate, but once I installed Linux, I never connected the monitor again. Simple software raid is enough for my purposes, and I didn't bother mirroring the root disk (which I can always just replace and re-install).

Re:Cheapest, best way is to build it

[Yosho]

Software RAID costs cycles.

Only a very small amount -- if you're using this computer simply for file storage, especially with 100 Mbit ethernet as your primary means of connection, you will never even notice the tiny slowdown caused by software RAID. An old Athlon XP with 256 MB of RAM are just fine, although if you want to do something like turn that file server into a web & e-mail server, you might want to bump it up to 512 MB. None of those things are computationally intensive at all, unless your server gets a ton of traffic; even then, you'll probably be limited more by your I/O speed than your CPU. A 64-bit processor won't help you at all if you're not doing any sort of scientific computing and you don't need to use more than 4 GB of RAM.

Heck, for years I ran a personal server on an old 450 MHz K6-III with 512 MB of RAM and three hard drives in a RAID 5. The only time I noticed any lag at all was when doing SSL negotation or when it was running a certain PHP-based webmail program on it. I upgraded it just this last year to an Athlon XP 2200+ with 1 GB of RAM, and I never even come close to making the CPU max out, and I'm also running a VPN server and spam filter on it.

deja vu

[CodeMunch]

You could always refer to the recent Ask Slashdot on this very topic.

The Linksys NSLU2 is a little slow & not very intuitive but I just replaced my home file server (Athlong 1.4Ghz, 512MB, yaddahaddah) with one of these. There is a big fanbase for this little device and 3rd party firmware.

As a 'generosity-challenged individual'..

[zmollusc]

.. or 'miser' as other people put it, I hate to throw away working computers. Instead, I use them as file servers in the cellar (where i can't hear the fans whirring).
Even the humble PII has better performance and more simultaneous connections than a NAS enclosure ( or at least the cheap NAS enclosures I have bought ) and lasts a lot longer too.

My formula for home fileserving : cram an old PC with whatever IDE drives you have to hand and run FreeNAS on it, it will be plenty fast enough for 100megabit lan (which is fast enough for me). Whenever a drive fails, throw it away and put in whatever other (usually much bigger) hard drive is kicking around. When the motherboard fails, rescue the disks and build them into another fileserver.

RAID? why bother? Build another fileserver and keep your copies on that.

But what about the noise? Mine are in the cellar, only the spiders and woodworm can hear them.

Ah, but what about the power consumption? Pah! The heat slightly warms the house, reducing the energy used by the (admittedly more efficient) heating system, and is utterly dwarfed by the power consumption of other crap in the house. Also, a headless PII box uses much less power than you might think. Measure it.

Anyhoo, _my_ fileservers cost nothing but electicity, hold over a Terabyte and have uptimes of several months, so there :P