Slashdot Mirror

← Back to Stories (view on slashdot.org)

MiniOn ARM Microcontroller Programming System

Posted by timothy on from the software-you-can-touch dept.

profdc9 writes "For the past six months or so I have been working on the MiniOn, a network enabled microcontroller programming system, similar in idea to the Basic Stamp and Arduino hobbyists are fond of, but it is programmable and accessible through a Web browser and TELNET, requiring no installed development software. It uses the cheap, readily available LPC2000 ARM7TDMI micrcontrollers, and the easy to interface Microchip ENC28J60 for ethernet. The MiniOn firmware is written using only the free WinARM development tools (Linux tools work also) for those who wish to improve the MiniOn. I have already implemented an MP3 streaming server and a web-based graphical oscilloscope in MiniOnBasic. The MiniOn should hopefully lower the barriers and costs to getting started learning about embedded systems, and provide a non-proprietary method of data acquisition."

7 of 75 comments (clear)

  1. Gumstix by JohnFluxx · · Score: 3, Interesting

    How is this different from the Gumstix, which are small 600Mhz xscale chips (using ARM also) but also come with ethernet, bluetooth, touchscreen TFT screens, general I/O, flash memory, etc

    1. Re:Gumstix by belphegore · · Score: 4, Informative

      The gumstix is completely open source (though some 3rd party companies sell closed-source software for it for custom applications). Every line of code that ships on the gumstix, and every line of code for every utility used to build gumstix's factory software are completely open, and published. Gumstix even gives users write permission to its source code repository. Almost all of the hardware is fully open-source (all the daughtercards are -- the motherboard's schematic and layouts are closed, but all the interfaces are heavily documented, and gumstix the company is very open about talking about the stuff on the board to assist with any compatibility issues).

      Disclaimer: I used to work at gumstix, and I'm a stock holder.

    2. Re:Gumstix by ciroknight · · Score: 3, Insightful

      Meanwhile, Chumby is 100% open source hardware, including both the board and the default daughtercard, under a BSD-like license, along with 90% of its software (I only say 90% because the widget platform runs Adobe Flash, which is the only closed-source component on the entire device).

      Costs about the same as Gumstix, plus you get an LCD, speakers and a microphone.

      --
      "Victory means exit strategy, and it's important for the President to explain to us what the exit strategy is." G.W.Bush
  2. This sounds like it might help by kickmyassman · · Score: 3, Informative

    One of the major barriers getting into embedded programming is finding a cheap programmer that doesn't require RS232 standard 18 Volt serial ports (or similarly high-voltage parallel ports). If you're making something that helps around that? You're certainly going to help people get into the game.

  3. Re:Hmm by RattFink · · Score: 4, Informative

    It is quite similar to a PIC. The metric of it being a processor or a micro is the level of integration of memory and peripherals on the device. I can't think of a single ARM7 on the market that doesn't have some program accessible memory and at least a few serial ports and GPIO pins.

    --
    "I don't necessarily agree with everything I say." - Marshall McLuhan
  4. LPC2000? by serviscope_minor · · Score: 3, Interesting

    I've never used the LPC2000, but I have used the LPC3180, and it is a fantastic chip. Clocked at 200MHz, it just outpaces the 415MHz XScale and uses 1/8 of the power. Oh, and it can do hardware floating point, and for that it outpaces the XScale by a factor of about 8.

    --
    SJW n. One who posts facts.
  5. The intention of the MiniOn by profdc9 · · Score: 4, Informative

    The MiniOn is not intended to replace your oscilloscope or Gumstix. It is intended to basically turn an ARM7TDMI system on chip micrcontroller into a Basic-programmable webserver. There is only 32K of RAM on an LPC2148, which is not even enough to load GRUB, much less the Linux kernel. In this space I have used open-source libraries to place a functional TCP/IP stack, FAT filesystem for SD cards, a full-screen text editor, and a Basic language with a decent number of features. The LPC2148 is typically less than $10 and the ENC28J60 less than $4. Therefore the MiniOn can provide quite a bit of functionality with very few resources and with little money. And no, it was not solely my intention to plug Olimex or Futurlec boards, but they happen to be some of the cheaper alternatives out there that can run the MiniOn firmware. I hope to have my own board made at some point. The advantage of the MiniOn is that it allows you prototype your project easily, log data to a flash memory card, and control it remotely through the web.