Slashdot Mirror
Pushing a CPU to Heat Death, Intentionally
sdougal writes "This site is showing a Pico-ITX board running Ubuntu with no cooling whatsoever. They even let the public guess how long it would last: 'Last week thousands of you placed bets on how long the new Pico-ITX board from VIA, the VIA EPIA PX5000EG, can last without any cooling whatsoever. An ARTiGO Builder Kit was offered as the grand prize. Yesterday afternoon the voting stopped and the Naked Pico Challenge started in earnest. We simply loaded up Ubuntu 8.04, set it to work playing an mpeg-4 video and then removed the heatsink, leaving the CPU and VX700 chipset bare to the world. We recorded the event here in this video and set up a live video stream so you punters can keep a watchful eye on the PX5000EG as it works away.'"
It was an expensive lesson in the importance of the heatsink.
Of course, many of us can remember back when CPU's didn't even need heatsinks. My first build was a 486SX with a zif chip slot and no CPU cooling--hard to believe now.
SJW: Someone who has run out of real oppression, and has to fake it.
Destroying things is fun, especially done with unorthodox methods.
As our way of thanking you for your positive contributions to Slashdot, you are eligible to disable Slashdot 2.0.
They should make the mp4 hours of video of hardcore pornography, and we can all make bets on what the final frame that it shows before locking up and shutting down will be about. Blowjobs, anal, AtM, Bukkake, fem domination, tentacle sex, etc. It will bring more people to RTFA and WTFS (Watch The Fucking Stream).
slashvertisement. There I said it.
VIA showing off their board, offering a VIA-equipped toy to someone, disguising the entire thing as a geek event and plastering it on geeky sites. Gee, that sure is great news for nerds, stuff that (doesn't) matter...
"A door is what a dog is perpetually on the wrong side of" - Ogden Nash
If a CPU is going to crash or go up in smoke after heatsink removal under load it will do so within 30 seconds. Since it hasn't done so yet and considering it's a 1W energy efficient CPU the only effect should be a reduction in its longterm lifespan (maybe it will only run 2 years rather than 8). I don't see the excitement here, until they take a hairdryer to it which they say they will do after two weeks. That should be interesting.
https://dalgamotor.wordpress.com/ - Elektronik beyinlere ozgurluk asisi (Turkish)
I predict a lot shorter now that the page with the video is linked on the Slashdot front page.! ;)
My blog
Yes, well... everyone everywhere should stop doing interesting things, because someone, somewhere may have done something similar. You don't per chance work for the US Patent Office do you? Software Patent Division?
Like the ole Timex watch that "took a licking and kept on ticking" my desktop box, an ancient AMD Sempron 2600+ with a VIA chipset, unknown to me, lost its power connector to the CPU fan, which I only discovered by accident when replacing a hard disk drive. The CPU was hot enough to scald my finger, but neither its performance nor its stability has suffered one bit.
Of course, the heatsink was still connected. But the Sempron was IIRC most definitely NOT a low-power cpu.
Yes, I reconnected the CPU fan. But at least I know my sh*t can take the heat.
No video is available ;o{ .
How long before we see this up on www.microsoft.com/getthefacts/ with the headline:
"Linux will set your computer on fire."
You have been warned.
Genesis 1:32 And God typed
A few years back, I was troubleshooting a problem on my desktop. It had a Duron 800 in it. I got tired of putting the heat sink and CPU fan back on every time I made a change, so I figured, what the hell, how hot can it get in the time it takes to try and boot. It made it through the boot fine. I mused "Works great! I bet it doessn't even get that hot. Wonder how hot it is?" With that thought, I reached in and touched the top of the CPU. It was so hot that it instantaneously branded the text and logo etched in the top of the chip onto my thumbtip, before I could react and yank my hand back. For a few weeks, until it sloughed off, it was readable in reverse on my thumb...taught me new respect for the current consumption & heat generation capabilities of CPUs.
There is no God, and Dirac is his prophet.
How long will that be though? 2 years? 3 years?
which is totally what she said
There are quite a few guys around here who moderate "insightfull" instead of "funny" because "funny" gets you no karma and "insightfull"... well, does. :-)
the formula for convective heat transfer (transfering heat from the surface of the heatsink to the air) doesn't involve thickness. A very thinly-sliced 12"x12" sheet of aluminum, uniformly heated to 200F, will transfer just about as much heat/second to the air as a thick plate of 12"x12"aluminum @200F will (there will be some differences, because the plate has a *bit* more surface area, but I digress...)
However, CONDUCTIVE heat transfer (getting the heat to go from the "hot" end of the heat sink to the tip of the fin) is directly proportional to surface area. This means that, were you to use a single sheet of aluminum foil as a "fin" on your heatsink, you would not be able to get the heat to actually travel effectively to the tip of the fin where it could be removed via convection. Thus you'd wind up with a very hot "hot" end of the heatsink (near the chip, which does you no good), and a cool "cold" end of the fin (which is worthless, as convective heat transfer is proportional to the difference between the surface temp and the air temp). If you were to instead use a thick sheet of aluminum as your "fin", that would allow the heat to easily travel from the "hot" end to the tip of the fin, where the air could take it away.
However, you can get the best of both worlds by using multiple thinly-sliced sheets of aluminum. Same cross-sectional area as the thick slice (for good conduction), and maximum surface area (for convection). Which is exactly what most heatsinks look like.