Slashdot Mirror
Machine Prints 3D Copies Of Itself
TaeKwonDood writes "Automated machines have been around for decades. They have basically been dumb devices that do simple assembly tasks. But RepRap takes that a step further because, instead of assembling pre-fabricated parts, it creates 3-D objects by printing them — squirting molten plastic in layers — and then building them up as the plastic solidifies. It works on coat hooks, door handles and now it can even make working copies ... of itself. The miracle of additive fabrication, coming soon to a robotic overlord near you."
Haven't I heard this before?
FTA (emphasis mine): The materials, plus the minority of parts that the machine cannot print, cost about £300. It also does not actually assemble the parts it creates. So close and yet so far.
=Smidge=
All the times I've owned something and one annoying plastic part breaks ruining the product. With this baby it'd be so easy for companies to send replacement parts at a fraction of the cost I bet.
If I still had my old Dell laptop I'd print the latch that broke off a few years ago.
~~ Behold the flying cow with a rail gun! ~~
and stories about itself on /. Didn't we have an
article/discussion a few days ago, and figured out
the only thing this 'self-replicating printer machine'
does is make copies of its case?
The guys who designed this thing aren't a business. They put the design online and the list of parts online for free, and tell anyone who wants to make one for themselves, then print one off for a friend, who can make one for his friend....
The creator of this post (Jacob Smith) hereby releases it, and all of his other posts, into the public domain.
not anymore. The Creator has created and is now obsolete.
rewriting history since 2109
It can't even print itself as it still requires non-printed parts.
What it does is print the plastic parts needed to make a copy of itself - you still need steel rods, motors, nuts and bolts, nichrome wire to make the heater core and a handful of small Anduino circuit boards. And of course you have to bolt it together yourself. Pretty soon it should be able to make its own circuit boards - but you'll still need to add electronic components.
It's a significant step - but the slashdot blurb wildly over-sells it.
Won't work with this machine unfortunately ... it lacks a support material, so it can only print a certain, very limited class of 3d shapes.
:)
In fact it can't print any structures that won't retain their shapes when melted to, say 5 degrees below their melting point.
The safe class of objects that it can print are those that are basically straight-up walls upon a flat base. The most complex stuff it would be able to print is a gothic castle (the ones with tiny windows), and you'd have to put the roofs on top of them afterwards.
The "full" class of objects it can print are those where a finite element stress analysis (*with* gravity active obviously) doesn't have any red spots.
(and now translation from technobabble to bad news
It can't print Gundam models. At least not directly. For a less limited class of objects you could make 2 half-negatives, allowing you to mass-produce them. You'd have to paint them afterwards.
A video of Adrian Bowyer's RepRap can be found at ofpblog.
Comment removed based on user account deletion
It uses polylactic acid, which is thermoplastic, not thermosetting: the machine melts it and prints the droplet of hot material, which then freezes solid. Apparently it can also print stuff that stays somewhat flexible after printing, for softer items.
There are plenty of molten plastics that don't degas much, and there are some that are incredibly toxic. I haven't found anything about PLA yet, but I know a bit about lactic acid and it shouldn't be the health risk that, say, the stuff coming off melted polyvinyl chloride would be, or any nitrile-containing polymers. Molten nylon's not too bad, though.
Nostalgia's not what it used to be.
http://dev.www.reprap.org/bin/view/Main/RepRapGPLLicence
Yes, they do. They're using a modified version of the open-source Art of Illusion 3D modelling software for this.
"They redundantly repeated themselves over and over again incessantly without end ad infinitum" -- ibid.
Give it a different printhead, and it will be able to lay down patterns on a blank circuit board.
"They redundantly repeated themselves over and over again incessantly without end ad infinitum" -- ibid.