Western Digital Working On a 20,000 RPM Drive

MrKaos writes "Western Digital seems to be preparing for the onslaught of solid-state drives set to impact its market by developing a 20,000 rpm hard drive. Similar to the VelociRaptor line of drives, the new drives are speculated to be offering lower capacity as a tradeoff for faster seek and write times." This report out of Taipei is the only word on the rumored WD 20K drive. It's said to be a 2.5" drive in a 3.5" enclosure, for efficiency of cooling — the arrangement the Register enjoyed poking fun at when the 10K drive was upgraded last month.

Comments

immovable object?

[seeker_1us]

I wonder if these really fast hard disks will have to be kept stationary. More specifically: I wonder if conservation of angular momentum (manifested, for example, in gyroscopic precession) becomes a real issue if any torques were put on a spinning disk.

Re:immovable object?

[Z00L00K]

Even though they are intended to be used in server hardware where they are going to be kept stationary you will also be able to find users that are going to use them in their home computers or in servers that are on the move.

This means that the gyro effects are worth to consider. Also considering my experience from WD disks I'm not sure that I would want to use them for anything reliable.

For a solution where speed is important but the data itself can be re-created or of less critical value they can be OK.

Solid State

[c0d3r]

I'm wondering why they are still going in this direction, as hard drives are the slowest part of a computer. Why hasn't a solid state / flash ram approach taken over? Is it feasible to have a hybrid solid state/mechanical solution?

Add heads?

[macemoneta]

It seems strange to continuously up the rotation speed, adding noise, vibration, heat and shortening the life of the drive. Why not just add another set of heads on the opposite side of the drive? You get many of the same benefits - increased sustained transfer rate, but also reduce the seek and latency. To maintain the form factor, reduce the size of the platters (use 2.5" drive platters in a 3.5" drive).

Re:Add heads?

[frieko]

Modern hard drives can only read from one head at a time. The tracks are packed in such that thanks to uneven thermal expansion, only one track will be lined up under a head at any given time. But two sets of heads might work as gp suggested.

Re:Western Digital? Oh good!

[bigstrat2003]

Bad luck? I've never had a problem with WD, I swear by 'em. One of us is having unusual luck, and I'd prefer to think it's you. ;)

Maxtor, on the other hand... I lost count of how damned many Maxtor drives I've seen die. Single most failure-prone drive manufacturer I've come across. Everyone else, I see a dead drive here and there, nothing serious, but Maxtor is obscene.