Slashdot Mirror
Brand Names Take On Generics In PSU Showdown
The Raindog writes "The power supply is perhaps the most overlooked element of a modern PC, and yet it's the one component that can irreparably damage the rest of a system. The market is littered with generic PSUs that are often much cheaper than name-brand alternatives, but can you trust them? The Tech Report aims to find out in its latest power supply round-up, which compares the performance, efficiency, and noise levels of a collection of reputable PSUs with some budget, no-name competition. As it turns out, any money you save on a generic PSU purchase will likely cost you more in the long run."
And before you think that all your PSUs are failing because you bought them on the cheap, you should also check your UPS. I had 13 PSUs die at Suso and thought it was just horrible luck with power supplies, until I realized that the 5 year old UPS that those servers were on was having issues. Since I replaced it, haven't had any problems since. *knock* *knock*
Comment removed based on user account deletion
They should have checked each power supply for a UL marking, and an entry in the UL Certification Database. Things seem to be getting better, though; the power supplies tested did not blow up or catch fire at full load. That's a big improvement from a few years ago.
The basic UL requirements are 1) no overload problems at full load, 2) no explosion or fire under output overload/short conditions, and 3) no single component failure can cause a fire (i.e. there should be a fuse of some kind in there.) It's permitted for an overloaded unit to fail and never work again; that's not a safety issue. Some no-name power supplies had real problems meeting those basic conditions.
jonnyguru.com is probably the best site for power supply reviews. the guy does FULL disassembly, even removing rectifiers and diodes and stuff. Because of this he is able to determine what OEM manufactured every power supply he tests, and also gives you comments that, if you payed enough attention, would allow YOU to determine the layouts typical of each OEM. He's also the guy that started using an actual load tester to test power supplies, instead of testing them by placing them in systems. The ORIGINAL hard core power supply test site!
I KUT J00 M4NG!!!
Here's a partial list:
I've seen companies use components rated at or just below their stated current rating in order to save money (using 8 amp transistors in a 10 amp supply, for example). They'll often work right out of the box, but, since there's no margin built in they will run hot and eventually fail. As to component quality, take it from someone who designs and manufactures precision instrumentation, I can tell you that there can be an enormous difference in quality from one manufacturer to another. "considering all the parts are mass manufactured, anyway" is not a valid argument.
Yes, I agree that jonnyguru.com is the best review source for PSU stability (noise and transients are measured with oscilloscope and compared with ATX specs) and build quality (inside pics and commentary on components used). If you additionally care about the noise your PSU is making at various loads, silentpcreview.com has those measurements. I bought a couple of power supplies based on the review on to those two sites, and never had issues stability or noise wise.