Slashdot Mirror
IPv6 Adoption Will Grow With Smart Grid Adoption, Hopes Cisco
darthcamaro writes "A lot of people in the US have not seen a use case for the use of IPv6 yet, since we've got plenty of IPv4 addresses. But what happens when the entire electrical grid gets smart? The so-called Smart Grid will need a networking transport mechanism that will connect potentially hundreds of millions of people and devices. Networking giant Cisco sees IP (internet protocol) as the right transport and IPv6 as the logical choice for addressing. 'Pv6 is an interesting discussion and one that occupies a lot of bandwidth at Cisco,' Marie Hattar, Cisco's vice president of network systems and security solutions marketing said. 'Some people say that for smaller deployments, we could get away with IPv4, but the smart grid has a number of parts. The point is that if you're looking to build this [smart grid] out, why not build it out on the scalable protocol from the get-go?'"
The internet and especially all the Linux nodes on the internet are designed from the ground up to have a static IP addresses and IP names and be their own DNS and own Mail smarthost and web server and ....
Between the control freaks, the clueless, and the bean counters in Microsoft and the ISP's we have an internet with...
IPv6 will _never_ be allowed into the current mix.
throw out routers? haven't ciscos been ipv6-capable for at least a decade now?
Pretty much (although you might have to buy a firmware upgrade... but then if you aren't running a recent firmware you're probably infested with security holes anyway).
those that aren't probably don't NEED to be, anyway.
That's rather untrue though. If you're going to deploy IPv6-only systems then *all* the routers on the network need to do IPv6. Yes, this even includes the home DSL routers, most of which currently on the market *still* have absolutely no IPv6 support, even though we only have about 2 years until IANA runs out of IPv4 addresses. Anything else is going to involve kludging things to work through IPv4 to IPv6 gateways, or tunnelling IPv6 over IPv4 to bypass the non-compliant devices.
The whole IPv4 address exhaustion problem is a really good example of people sticking their heads in the sane and hoping the problem goes away - most ISPs seem to not be interested in preparing their networks for IPv6 at all (PlusNet told me that they had no plans to roll out *any* IPv6 support over the next few years and EntaNet seem to have halted their IPv6 trials). Some time towards the end of 2011 there will be a "sky falling" moment similar to what we saw at Y2K when ISPs realise they are basically screwed and are going to have to do an expensive rush-job of deploying IPv6 over their networks in just a few short months.
not everything needs a world-wide public address. NAT 'security' is actually a Good Thing(tm).
Argh! Please will people stop spreading this crap. There is practically *no* security provided by a NAT. You get security from stateful packet inspection. NAT requires stateful packet inspection to work, but there is no significant security advantage (and many really serious operational disadvantages) provided by running NAT instead of just a stateful firewall. Also, most home NAT routers provide no stateful firewalling, only the limited stateful tracking required to make NAT work, and can therefore easily be bypassed by anyone on the upstream segment (which may be a few hundred random members of the public in the case of some cable setups).
Security is better served by doing proper stateful firewalling, and this is probably best achieved by removing NAT from the equation so that people don't have a false sense of security. Removing NAT also solves a lot of operational problems, as there are an increasing number of protocols that can't be made to work well through NAT (and whilst many people regard this as a flawed protocol design, there are sound reasons for designing these protocols in this way).
http://blog.nexusuk.org