Slashdot Mirror
Nvidia Fakes Fermi Boards At GPU Tech Conference
fragMasterFlash writes with this excerpt from SemiAccurate:
'In a really pathetic display, Nvidia actually faked the introduction of its latest video card, because it simply doesn't have boards to show. Why? Because it didn't get enough parts to properly bring them up, much less make demo boards. ... Notice that the three screws that hold the end plate on are, well, generic wood screws. Large flat -head Phillips screws. Home Depot-grade screws that don't even sit flush. If a card is real, you hold it on with the bolts on either side of the DVI connector. Go look at any GPU you have; do you see wood screws that don't mount flush or DVI flanking bolts? ... If you look at the back of the fake Fermi, [from this PC Watch picture], you can see that the expected DVI connector wires are not there, just solder-filled holes. No stubs, no tool marks from where they would be cut out. Basically, the DVI port isn't connected to anything with solder, so they had to use screws on the plate."
A company faked a product...won't be the first time, won't be the last time.
This is actually a lot more common than you might think. Lots of tech shows (whether it's cell phones, computer parts, etc) bring "fake" models in. Sometimes it's just the production case with weights in. Sometimes, when a device needs to be outputting video, what you see is just a movie being played as opposed to its actual output.
Recently, netbook manufacturers have been caught doing it. During shows, you can see some brand new, thin and light netbook with a sign as "display model only". When show-goers pick it up, they see empty holes where USB, power, and ethernet connections should be. All that's there is a LCD, a keyboard, and a plastic shell.
And yet, you still make excuses for them? Any other company would get slaughtered in the press for such an obvious stunt...
"Victory means exit strategy, and it's important for the President to explain to us what the exit strategy is." G.W.Bush
You'd think a company like Nvidia would be a bit more careful given their CEO's penchant for bold claims and harping on any perceived gaffe by competitors.
I suspect this "announcement" was very rushed after AMD's recent announcement of their new DirectX 11 part that seems to outperform anything Nvidia has out at the moment and at a lower price point. Combine that with Intel's snub on producing chipsets for new/relevant PC platforms and one can imagine that Nvidia was anxious to appear competitive. Nvidia is in for a VERY tough slog.
The end of the motherboard was roughly dremmelled off to match the fan enclosure (that is surely the designed fan enclosure for the card). The power connectors were glued on, and didn't match the solder pads for said connectors (indeed one was mostly sawed off).
Prototype? No. This card can't work.
Blatant fake presented as a working board? Yes.
Back-pedalling and claiming it is a mock up after the fact? Yes.
The author is apparently not that familiar with screws. "Not being countersunk" has little to do with what type of screw something is. Neither does being a "wood screw" have much to do with bing flush with a surface. It has to do with the screw being "pan-head", and whether the surface has been drilled to allow the screw to fit into it. (That's the 'counter-sunk' part.)
To see if it's a "wood screw", a "machine screw", or a "sheet metal screw", you'd have to see the threads and especially the tip. Wood screws have broadly gapped threads, and a sharp tip, and generally a bit of a taper along their length to the point, designed to gouge themselves into the wood as you screw in but without splitting the wood. Sheet metal screws have closer spaced threads, a sharp tip, and much less taper or none: they're used to screw into soft metal like aluminum and gouge their way in, but you generally have to pre-drill a hole for them. Machine screws have closely spaced threads, no taper, no sharp tip, and require the hole to be pre-threaded to work.
Counter-sinking takes time and a bit of skill to get just right without overdrilling and making the case weak. Merely tapping, or pre-threading is quicker: I can easily believe that a prototype would not be countersunk.
Oh, and there's AMD/ATI adverts all over it. Who gives a fuck about nVidia using a mock up, companies do this all the time at tech shows. It's a non-issue! What is the issue is why an article from a site that is so obviously geared around slagging off nVidia was posted here.
(and no, I'm not new here.)
She's built like a steak house, but she handles like a bistro....
Little things matter. When designing hardware, when building software, getting those little details right helps prevent errors and failures later on. The ranting about the wood screws dominated the original post: failing to correct that would help make anyone else who repeated the rant look like, well, like someone who shouldn't be trusted with a screwdriver.
Getting those details right can help your credibility quite a lot when you fill out a bug report, a blog, or even a letter to family.
What's up with all the decorative crap that goes into video card housings these days? It would be nice to be able to get high end hardware that isn't burdened with fluff designed to appeal to the minimally sapient crowd.
I am becoming gerund, destroyer of verbs.