Graphene Transistors 10x Faster Than Silicon

Asadullah Ahmad writes "IBM has created transistors made from carbon atoms, which operate at 100 gigahertz, while using a manufacturing process that is compatible with current semiconductor fabrication. With silicon close to its physical limits, graphene seems like a viable replacement until quantum computing gets to desktop. Quoting: 'Researchers have previously made graphene transistors using laborious mechanical methods, for example by flaking off sheets of graphene from graphite; the fastest transistors made this way have reached speeds of up to 26 gigahertz. Transistors made using similar methods have not equaled these speeds.'" The other day we discussed what sounds like similar research by a group of scientists at Tohoku University; that team did not produce transistors, however.

Comments

Commercially Viable

[LikwidCirkel]

With all the stories of highly-experimental new, novel types of transistors - the majority of which are expensive-research only with no chance of commercialization any time soon, it's refreshing to see something that actually takes production feasibility into account.

My prediction

[Thanshin]

Year 2173:

"Hidrogen-Unobtanium polycomposites seems like a viable replacement until quantum computing gets to desktop."

hold yer horses

[lurgyman]

Before you get yourselves worked up, realize there is no mention in this article or the original article in "Science" for applying this for computing. There's somewhat of a misstatement in the technology review article - if you look at the actual article in Science (http://www.sciencemag.org/cgi/content/abstract/327/5966/662), the 100GHz figure is the unity (or cutoff) gain frequency (e.g., how high of a frequency you can build an amplifier) and not switching. There is no mention of switching in the paper by the IBM scientists, and that is the application relevant to computing. Even TFA's expert is talking about using this in analog communication frontends, folks. Sorry.

Re:9x faster, not 10x faster

[Just Some Guy]

These transistors are only about 9x faster than silicon, not 10x faster as the Slashdot headline claims.

Oh, well, in that case don't even bother.

Re:Didn't Produce Transistors? Oh Come On!

[robathome]

I think you're just misunderstanding the problem.

The "baud rate" of telephone lines is pretty slow. Baud rate is the number of symbol transitions per second the media can support. Baud rate and bits/second have not been equivalent since Bell103a/V.21 frequency-shift-keyed modems, where 300 baud meant 300 bps, each state transition being a discrete tone that indicated a "mark" or "space" (0/1). From then on, Bell 212a/V.22 used phase-shift keying to get 1200 bps out of a 600 BAUD symbol rate, encoding two bits of information per symbol.

POTS lines are pretty pokey - the practical maximum BAUD rate is less than 3500 symbols/sec. Where speed advancements were made in later evolutions of POTS modems were in the number of bits that could be encoded per symbol, using QAM and Trellis Modulation. A 33.6 kbps modem is encoding 10 bits per symbol onto a 3429 baud carrier.

So, when you kept hearing "phone lines max out at less than 4800 baud", that was correct. The engineers kept wringing higher bit rates out of narrow-band POTS by putting more information on each of the symbols transmitted.

Then, with V.70 and V.90, the modulation schemes took advantage of certain characteristics of non-muxed POTS lines to use PCM digital encoding instead of an analog audio carrier. Unfortunately, if you were serviced through a SLC-96 ("Slick") muxed subscriber loop, which multiplexed the signal from your subscriber line to the central office, you could only connect with older analog modulation schemes such as v.32/v.32bis/v.34.