Slashdot Mirror
The Rise and Fall of America's Jet-Powered Car
Pickens writes "The WSJ reports that the automobile designs of the 1950s and 1960s were inspired by the space race and the dawn of jet travel. But one car manufacturer, Chrysler, was bold enough to put a jet engine in an automobile that ran at an astounding 60,000 rpm on any flammable fluid including gasoline, diesel, kerosene, jet fuel, peanut oil, alcohol, tequila, or perfume. Visionary Chrysler designer George Huebner believed that there was plenty to recommend the turbine. People loved the car. In a publicity scheme to promote its 'jet' car, Chrysler commissioned Ghia to handcraft 50 identical car bodies and each car would be lent to a family for a few months and then passed on to another. Chrysler received more than 30,000 requests in 1962 to become test drivers and eventually 203 were chosen who logged more than one million miles (mostly trouble free) in the 50 Ghia prototypes. In the end Chrysler killed the turbine car after OPEC's 1973 oil embargo. 'How different would America be now if we all drove turbine-powered cars? It could have happened. But government interference, shortsighted regulators, and indifferent corporate leaders each played a role in the demise of a program that could have lessened US dependence on Middle East oil.'"
There was a recent post on a jet powered concept car... I wouldn't call the idea dead yet.
http://hardware.slashdot.org/story/10/10/01/0039240/Jaguars-Hybrid-Jet-Powered-Concept-Car?from=rss
Every time I start to have faith in humanity, I ruin it by driving to work between 7 and 8 am.
I remember reading about Rover doing experiments with turbines in the 40s.
linky http://www.rover.org.nz/pages/jet/jet5.htm
From the comments in the WSJ online, people who rode in them described them as nearly silent.
The idea that the dependence on "Middle East oil" could have been lessened is seriously misleading. Gas turbine technology is best suited to very large installations. In an internal combustion engine, one needs a high compression ratio to get good thermal efficiency. In a gas turbine engine, this is most easily achieved by making a (very) large engine that runs at a relatively constant speed. There are major practical problems in making small high compression gas turbines (among other things, conventional axial or centrifugal flow compressors do not scale well to small sizes). The result is very poor fuel economy. Chrysler wasn't the only manufacturer to build a gas turbine powered car. Rover built one in the 1950's. At best these efforts demonstrated passable, but not exceptional performance coupled with VERY high fuel consumption. This may not have seemed like a big issue when oil was a few dollars a barrel. It would be completely unacceptable now, even if one allows for the flexibility of being able to use various types of fuels. There just isn't enough of any reasonable alternative fuel to operate existing private and commercial vehicle fleets, especially if there is a massive fuel consumption penalty.
"Gas turbine" is the usual term for a turbine that drives via its shaft rather than by its exhaust.
The problem with a gas turbine is that they have rather poor efficiency. They have an excellent power-to-weight ratio (which is why they're used in aircraft, and why gas turbines are used in helicopters), but their fuel economy, even when used in an electric drive system and always running at the peak efficiency RPM, will never reach that of an average petrol engine, let alone diesel. Add that a diesel engine can run on most (if not all, when correctly filtered and if the engine is tuned for it) of the range of fuels a gas turbine can, it's the better choice for a vehicle that doesn't need to lift it's own weight except when on a gradual incline.
> How noisy were they?
Quiet, actually. I was at the Museum of Transport in St. Louis this spring and happened into the auto hall just as they fired up the engine on their turbine car. Having spent a lot of time working with industrial gas turbines, I was surprised at how noisy it wasn't - considerably less noise than a piston engine of equivalent horsepower from that era.
Quite a lot of smoke though; they had to open up a garage-sized door for ventilation.
sPh
>> How noisy were they?
> Extremely
Having just heard a Chrysler Turbine Car in operation this spring, I'll have to respectfully disagree: I was surprised by how quiet it was.
sPh
Trains don't need rapid acceleration, but they do need efficient cruising speeds...
Only works over flat land with no (slow) cities. I have three male generations of railroad employees in my ancestry... I had some pretty interesting experiences when I was younger, most of which, even back then, probably violated dozens of regulations. Trust me, a railroad engineer out on the mainline works the throttle and brakes at least as much as a car driver in roughly the same terrain. Their arms get tired... "Why does the throttle only have 8 stops?" "Well, you're adjusting it constantly anyway, so why put in more stops?"
"Science flies us to the moon. Religion flies us into buildings." - Victor Stenger
Those are called safety wires; they prevent bolts and nuts loosening under vibration. You'll find them all over an airplane, too.
If you were in a tampering mood, you'd need some super high-tech equipment to get past those wires: a pair of diagonal cutters and a coil of safety wire.
rj
anti-tamper would have had thin copper wire with little lead seals that were embossed with an inspection code, what you saw would have been standard anti-vibration wire-locking to prevent bolts and nuts from undoing themselves.
Donald 'Duck' Dunn: We had a band powerful enough to turn goat piss into gasoline.
They have an excellent power-to-weight ratio (which is why they're used in aircraft, and why gas turbines are used in helicopters), but their fuel economy, even when used in an electric drive system and always running at the peak efficiency RPM, will never reach that of an average petrol engine, let alone diesel.
Exactly. They make an excellent engine for a race car unless they rewrite the rules to make it impossible to use a turbine.
http://www.turbinecowboy.com/carstrucksmotorcycles/1967IndyTurbine/
As to sound levels, one of the biggest complaints against the turbine at Indy was how quiet it was.
Sigh. That was a great race.
Both minivans and SUVs were developed to get around the CAFE standards because there was a demand for vehicles that if they were under the CAFE standards would have made it impossible for the auto manufacturers to meet those standards
That "impossible" is not an engineering impossible, but rather a political / can't-be-bothered type of impossible.
Elsewhere in the world where CAFE-type standards were set a lot higher than the US and without the big loophole (eg. Europe, Japan) there doesn't seem to be any problem satisfying the demand for family vehicles - and median household sizes are pretty similar in EU and US (around 2.5), so family car demand will be also. I have a large 7-seater (7 adult seats not 5+2kid-sized) that you'd probably call "station wagon" or maybe "minivan". It does 50mpg, fully loaded - that's over 40mpg in US gallons.
Since that would be the large end of the station-wagons, and CAFE is average across the smaller more efficient cars as well, and CAFE standard was 27.5mpg (without using the light-truck loophole), what on earth was the problem ?
It sure wasn't the US companies being backwards in engineering knowledge - that car of mine is a Ford, and right now I could go out here and buy a Ford with better mpg & CO2 than a Prius. Not in America though, oh no, these cars are strictly not-for-US-market.
So why does Ford continue to sell the US market inefficient rebadged 1970s stuff ? Because they can, because low US CAFE targets allow them to, and because it makes more profit without needing to invest any money in modernising their US factories or technology.
Nothing to do with "impossible" and everything to do with "why bother when we can make more money using a loophole to sell old cheap inefficient stuff".
Jaguar is building another jet powered car, except this time the jet engine is used to charge a battery that will power an electric motor similar to what the Chevy Volt does. Volvo tried the same thing in the 90s with a jet powered hybrid.
my karma will be here long after I'm gone