Slashdot Mirror
A $25 PC On a USB Stick
KPexEA writes with this excerpt from geek.com:
"[Game developer David] Braben has developed a tiny USB stick PC that has an HDMI port on one end and a USB port on the other. You plug it into an HDMI socket and then connect a keyboard via the USB port, giving you a fully functioning machine running a version of Linux. The cost? $25. The hardware being offered is no slouch either. It uses a 700MHz ARM11 processor coupled with 128MB of RAM and runs OpenGL ES 2.0, allowing for decent graphics performance with 1080p output confirmed. ... We can expect it to run a range of Linux distributions, but it looks like Ubuntu may be the distro it ships with. That means it will handle web browsing, run office applications, and give the user a fully functional computer to play with as soon as it's plugged in. All that and it can be carried in your pocket or on a key chain."
Eat your heart out, OLPC. This is 10 PC's per pocket.
Not quite as capable, in certain respects, as the Gumstix line of similarly sized ARM boards; but, on the other hand, you'll be lucky to walk away with change from $200 after getting your main board and an I/O expander if needed if you go that route. I wonder where the cost delta comes from?
One minor nit, this system doesn't appear to have any onboard networking(aside from the USB port which, from the picture of it connected to the B port of a hub, would appear to be one of those 'OTG' master or slave jobbies, which could easily enough act as a USB CDC or RNDIS connection to a host PC(which is kind of a waste for a single user; but a basic cheapy desktop loaded with USB cards could easily act as a gateway/fileserver/host for CPU intensive or x86 only programs over an X tunnel for a classroom full of the things)). I have to wonder if a "Flash drive sized" computer that basically doesn't work unless connected to a powered USB hub and a USB network adapter or CDC host PC might be rather less useful than would be a "pack of playing cards sized" computer that actually has a NIC and at least enough USB ports to support a mouse and keyboard(and ideally one extra for miscellaneous purposes)...
Look at the photo. There's a little USB/Ethernet bridge with a red/orange cable running to the left.
Someone flopped a steamer in the gene pool.
Here is some more info I got from a mail list I follow:
> > 1) How long do you think it will be before the boards become
> > available?
>
> I'd say three or four months. As you can see from the screenshots, we
> have usable Linux, but we're waiting to get final versions of the the
> chip from our supplier.
>
> > 2) Are there any plans for a version with onboard ethernet?
>
> I don't think we're likely to do onboard Ethernet; we will have an
> onboard 3-port USB hub so people can add an external adapter.
>
> > 3) Are there any plans for a version with onboard wifi?
>
> Yes. The final version (though maybe not the first distributables)
> will have onboard WiFi (probably 802.11n) in the price point.
>
> > 4) What are the power requirements, both under load and at rest?
>
> At rest I'd say 50mW (we could trim this if it was really important,
> but it gets a bit fiddly below this point), under serious load
> (original XBox class graphics or 1080p30 H.264), 700mW.