Slashdot Mirror

← Back to Stories (view on slashdot.org)

Cutting Open a Heatsink Heatpipe To See Inside

Posted by timothy on from the well-lookie-here dept.

An anonymous reader writes "Frostytech gets to the heart of Zalman's CNPS11X heatsink by cutting a section of heatpipe from the CPU cooler to inspect its inner composite heatpipe wick structure. Now that's an in-depth heatsink review! Interesting photos of the dissected heatpipe's composite wick — sintered copper powder on top and axial groove wick below — that you're unlikely to see elsewhere. In the late 1960s the first commercial heatpipes were used by NASA to stabilize satellite temperatures; now they stabilize multi-core processors."

5 of 132 comments (clear)

  1. Before anyone else says it... by roc97007 · · Score: 4, Funny

    > In the late 1960s the first commercial heatpipes were used by NASA to stabilize satellite temperatures

    Why didn't they just use fans? ...um, what? ...Really? Oh. Never mind.

    --
    Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
    1. Re:Before anyone else says it... by roc97007 · · Score: 4, Funny

      Or, rather, lack of Whoosh...

      --
      Oliver's law of assumed responsibility: If you're seen fixing it, you will be blamed for breaking it.
    2. Re:Before anyone else says it... by Thud457 · · Score: 4, Funny

      In space, no one can hear you Whoosh.

      --

      the preceding comment is my own and in no way reflects the opinion of the Joint Chiefs of Staff

  2. Re:Where's the juice? by Tjp($)pjT · · Score: 4, Informative

    The working fluid is often water. Sometimes ammonia but usually not for electronics. It is under lower pressure so that its boiling point is near the working temperature of the device. Boils off or evaporates, condenses in the cold side of the heat exchanger, then capillary action sucks it back faster than it would otherwise travel to the hot side. My favorite heat pipe was a flat grill ... awesomely uniform temperatures. Not sure what the working fluid was. Other ways besides fans are to immerse the cold side heat exchanger into more water at normal pressures and that can have even more surface area to cool the reservoir making an effective heatsink area that is HUGE...

    --
    - Tjp

    I am in wallow with my inner money grubbing capitalistic pig. ... Oink!

  3. Re:But how does it compare to a solid heatpipe? by AaronW · · Score: 3, Informative

    They work much better. See http://en.wikipedia.org/wiki/Heat_pipe

    -Aaron

    --
    This post is encrypted twice with ROT-13. Documenting or attempting to crack this encryption is illegal.