Slashdot Mirror
The 3D Un-Printer
An anonymous reader writes "3D printing is on its way toward becoming ubiquitous. Of course, if you have such a printer and want to print something, you need raw materials — the plastic filament that's fed into the machine. It's also likely that while you're learning the ropes, you'll print a bunch of terrible attempts at objects, and end up having to throw them out. Now, Wired is reporting on a device aiming to solve both of those problems. Tyler McNaney's 'Filabot' will break down failed projects as well as many other plastic items from traditional manufacturers, turning them into a filament you can then feed through a 3D printer. 'So far the plastics that work are HDPE, LDPE, ABS, NYLON. More to come on the different types that work.' McNaney sees it as a 'closed-loop recycling system on your desk.' The Filabot's Kickstarter campaign succeeded easily in 2012, and now he and his team are getting ready to launch."
That one is so easy to find from bags that it may be worth using those with this instead of throwing them away when you can't use them.
I can see this going very poorly for your average consumer very quickly.
You mean the subset of people who are capable of operating a 3D printer, but can't read numbers in a recycle label.
I was under the impression that extruders to create the feed filament were still pretty expensive.
Plastic pellet feed stock is cheap industrial commodity, a lot cheaper than the plastic spools that are ready to be fed in to your 3D printer.
Hell with feeding this with bits of old plastic. If you can just feed it a bag of pellets, and it's cheap to buy, we'd have solved one of the bigger issues with DIY 3D printing.
The Filabot has more marketing than it has engineering. The Lyman filament extruder has already surpassed the filabots noisy and slow output. Makible, makers of the soon to be $200 3D printer the Makibox (http://www.makibox.com), are releasing a 1.75mm extruder (dubbed the "ramen) that they've already demonstrated working in previous google plus hangouts. The filabot is overhyped and overplayed. They got huge funding via a kickstarter a while back and ever since then, produced a prototype machine that's on the level of the very first filament extruders the reprap project had to begin with.
Gary Hodgson has released the history of reprap development on his site: http://garyhodgson.com/reprap/reprap-developer-bookshelf/ - and if you look through the reprap ebook, you'll see people doing what the filabot is doing now....3 years ago.
This is a complete non-story that publications love to jump on, I just wish they would do their research first.
I have long wondered what it would take to recycle soda bottles, being they are all made with the same high quality plastic that withstands the pressures of carbonated water ( sometimes heated carbonated water ) without exploding.
Yes, it would be worth it to me to clean the bottle if I could feed the bottle into some sort of machine which would reform the plastic into a more usable form.
It would make a market for used soda bottles, and get them off the street and out of our landfills. Our congress would also have to set the framework for original bottling to make sure all bottlers used the same plastic formulation so the reformers could use it.
I can well see the day when darned nearly anything plastic, especially things like pipe and fittings, could be made to order on the spot. Plastic things no longer wanted could be offered as feedstock to make something else.
Can you see going to Home Depot for some half-inch irrigation pipe and be able to pay for it in either dollars or recyclable plastic... and having them set their machine to extrude what you wanted right on the spot?
"Prove all things; hold fast that which is good." [KJV: I Thessalonians 5:21]