Slashdot Mirror
Intel Offering 3-D Printed Robot Kits
jfruh writes Intel is developing a series of robot kits for hobbyists, ranging from "Jimmy", a $1,500 "social robot," to a more robust $16,000 model. The robots are powered by Intel x86 chips, are programmable, and can have exoskeletons parts produced at home by 3-D printers. From the article: "The two-legged Jimmy will be one in a line of robots that Intel hopes do-it-yourself enthusiasts will embrace, developing more functionality for the robots, which will be able to handle tasks such as turning on lights, picking up newspapers and even having conversations, researchers said at the Intel Future Showcase 2014 in New York City Tuesday. Intel and its robotics partners will sell kits with servo motors, batteries, boards, a frame and other internal parts. Using 3D printers, users can create robot designs and place them on the exoskeleton."
September 17th, 2014: Paramedics free Florida man's penis from 3D printed robot.
These seem similar to the Nao, which is a line of small humanoid robots from France. About the same price point.
What you can do with them depends strongly on the sensors. If the joints are position-controlled only, and you don't have force feedback, locomotion and manipulation will be clunky. There are some simple robot components, such as 6 degree of freedom force sensors for wrists and ankles, which are insanely expensive today, because they're made by hand for research and industrial purposes.
If you have all that sensing, plus three axes of accelerometer and three axes of rate gyro, you should be able to get Boston Dynamics type agility out of the thing. If the DARPA Humanoid Challenge produces some usable open-source software, it should be possible to move that down to toy-sized robots.
I should pay for [...] the same shit they design once and resell multiple times
You mean like pretty much every company that makes anything in the entire world?
systemd is Roko's Basilisk.
Are you familiar with ROS, http://www.ros.org/ ? It's basically a set of libraries for various robotics tasks and sounds like what you're describing.
Have you looked at how much robotics parts cost? A cheap servo is $12, an acceptable servo costs $45, and good servos you might use with surgical precision start at $95. High torque high precision motors a human sized model start in the $450 range and go up from there.
Six range of motion arms (let alone three digits per finger) means 12 servos for just the arms. It's no wonder people are looking at pneumatics, hydraulics etc for high torque high precision "digitla muscles". Robotics is expensive. And when you wire a servo wrong at 4 in the morning because you've been working too long you end up replacing these things at a fast rate (Ask me how I know). Just getting in to a 5 degree of motion laser cut wood arm, starting the hobby from scratch, cost me about $600. And that's with the $12-20 level servos.
moox. for a new generation.