Ask Slashdot: Is It Feasible To Revive an Old Linux PC Setup?

Qbertino (265505) writes I've been rummaging around on old backups and cleaning out my stuff and have once again run into my expert-like paranoid backups and keepsakes from back in the days (2001). I've got, among other things, a full set of Debian 3 CDs, an original StarOffice 6.0 CD including a huge manual in mint condition, Corel Draw 9 for Linux, the original box & CDs — yes it ran on a custom wine setup, but it ran well, I did professional design and print work with it.

I've got more of other stuff lying around, including the manuals to run it. Loki Softs Tribes 2, Kohan, Rune, and the original Unreal Tournament for Linux have me itching too. :-)

I was wondering if it would be possible to do an old 2001ish setup of a Linux workstation on some modern super cheap, super small PC (Raspberry Pi? Mini USB PC?), install all the stuff and give it a spin. What problems should I expect? VESA and Soundblaster drivers I'd expect to work, but what's with the IDE HDD drivers? How well does vintage Linux software from 2003 play with todays cheap system-on-board MicroPCs? What's with the USB stuff? Wouldn't the install expect the IO devices hooked on legacy ports? Have you tried running 10-15 year old Linux setups on devices like these and what are your experiences? What do you recommend?

Comments

I recommend

[infernalC]

VirtualBox

Re:I recommend

[Nimey]

I've gotten Debian 2.2 to run reasonably well in VMware Player. Network and SCSI worked pretty well, don't think the sound did due to a missing driver, and I had to do some work to make X use the VESA framebuffer:

0) In lilo.conf, add "vga=791" (or another value) to the kernel invocation. May have had to compile a kernel with fbdev first.
1) install the xserver-fbdev package
2) copy /usr/share/doc/xserver-fbdev/examples/XF86Config.fbdev to /etc/X11/XF86Config.
3) edit XF86Config to reflect the color depth chosen in the vga= stanza in lilo.conf; with vga=791 it's 16 bits.
4) Same file, edit mouse information to reflect what VMware provides (device is /dev/gpmdata (I have gpm installed, otherwise probably /dev/psaux) and protocol is Microsoft).
5) Edit /etc/X11/Xserver and replace first line with the path to the FBDev X server, e.g. "/usr/bin/X11/XF86_FBDev".

Now you should have a functioning X desktop, assuming you installed the packages. It won't be fast, since it's just the VESA framebuffer, but it's probably the best you can get with VMware and the ancient XFree86 stack in Debian 2.2.

Note that the VMware guest utilities will /not/ work.

Let's see...

[jones_supa]

I was wondering if it would be possible to do an old 2001ish setup of a Linux workstation on some modern super cheap, super small PC (Raspberry Pi? Mini USB PC?), install all the stuff and give it a spin. What problems should I expect? VESA and Soundblaster drivers I'd expect to work, but what's with the IDE HDD drivers? How well does vintage Linux software from 2003 play with todays cheap system-on-board MicroPCs? What's with the USB stuff? Wouldn't the install expect the IO devices hooked on legacy ports? Have you tried running 10-15 year old Linux setups on devices like these and what are your experiences? What do you recommend?

Raspberry Pi is probably out of question as it is an ARM device. I do not think any current systems offer SoundBlaster hardware compatibility either. VESA is fine, IDE HDD should be fine in ISA mode, but you won't get UltraDMA and there's probably other limitations. USB requires a specific driver, I guess you might get some kind of OHCI/UHCI USB1.1 support if you are very lucky.

All in all, there will probably be too many missing drivers and all sorts of weird errors to solve. I recommend that you get some vintage hardware from the same era to go with the Linux distro that you have.