Slashdot Mirror

← Back to Stories (view on slashdot.org)

Ask Slashdot: Old PC File Transfer Problem

Posted by samzenpus on from the I'll-never-let-you-go dept.

An anonymous reader writes I have an old Compaq Contura Aero laptop from the nineties (20 Mhz, 12 Mb RAM, Windows 3.11, 16-bit, PCMCIA, COM, LPT, floppy) with 160 Mb drive that I would want to copy in full to a newer machine. The floppies are so unreliable — between Aero's PCMCIA floppy drive and USB floppy disk drive — that it is a total nightmare to try and do it; it just doesn't work. If that option is excluded, what else can I do? I have another old laptop with Windows XP (32-bit, PCMCIA, COM, LPT) that could be used; all other machines are too new and lack ports. Will be grateful for any ideas.

15 of 466 comments (clear)

  1. file transfer by pen-helm · · Score: 5, Informative

    There used to be a program called Laplink that would transfer between machines over a cable. You could get special parallel "Laplink cables," but perhaps a null-modem serial cable would also work. (Light googling suggests you can use a 7-wire, null-modem serial cable.)

    I see there is a laplink.com web site.

    Wikipedia says, in MS-DOS 6.0 (and PC DOS 5.02) there was something like it included: INTERSVR and INTERLNK. But it looks harder to use.

    1. Re:file transfer by MrBingoBoingo · · Score: 5, Informative

      Probably faster to unplug the hard drive, order an adapter, and let UPS deliver it. The filesystem should be supported by any modern OS. If the disk works it will be a matter of browse and pluck.

    2. Re: file transfer by jtownatpunk.net · · Score: 5, Informative

      It took me about 14 seconds to find one for $20 on Amazon. IDE or SATA hard drive, USB2 interface. Took me longer to type that than to find the enclosure. Could probably find one even cheaper if I took the time.

    3. Re:file transfer by onproton · · Score: 5, Informative

      Regarding this idea: a couple of years back I bought this universal hard drive adaptor, since then it has gotten me out of quite a number of jams. After removing the drive, you can attach it to one of the adapter's IDE/PATA/SATA ports and directly access the files via a USB connection from the adapter - I'd say this is probably the least frustrating way to handle this situation.

    4. Re: file transfer by Anonymous Coward · · Score: 2, Informative

      Then it wouldn't be a 160GB drive. Just guessing, since my 40MB drive from 1990 wasn't even using that antique technology.

    5. Re:file transfer by rickb928 · · Score: 3, Informative

      Trumpet Winsock.

      Next question.

      --
      deleting the extra space after periods so i can stay relevant, yeah.
    6. Re: file transfer by bill_mcgonigle · · Score: 4, Informative

      you forgot to order the right Compaq IDE laptop header adapter. Whichever one it is for this model...

      Suddenly a Laplink cable and a VirtualBox running DOS with a detachable D: doesn't seem so awful bad. Move the image from the XP box via flash drive or network, mount it loopback and profit before lunch.

      http://www.pcxt-micro.com/dos-...

      --
      My God, it's Full of Source!
      OUTSIDE_IP=$(dig +short my.ip @outsideip.net)
    7. Re: file transfer by wierd_w · · Score: 5, Informative

      I dont know if you are serious or not--

      No. No ancient aliens. ESDI was in use in server equipment from that era. 200mb ESDI interface drives were pretty common inside IBM PS/2 series towers of that era.

      Specifically, found inside IBM PS/2 model 60 systems.
      http://ps-2.kev009.com/pcpartn...

      These featured an MCA ESDI hard disk interface in the later models. (Early models had MFM controllers.)

      If you suspect aliens, please inform the person selling this 680mb ESDI drive on Ebay.

      http://www.ebay.ca/itm/MICROSC...

      MFM and ESDI technology didn't get much beyond the 600-700mb before it was completely eliminated, but you CAN find drives that large with that interface type.

      No aliens involved.

  2. Pull the disk by borcharc · · Score: 5, Informative

    Get a ide controller and whatever adapter you may need and just plug the hd into your current workstation. Perhaps one of those usb -> ide deals would also be a easy answer. Why make it more complex then that?

    1. Re:Pull the disk by Anonymous Coward · · Score: 0, Informative

      http://www.amazon.com/USB-SATA-5-25-Cable-Adapter/dp/B000YJBL78

  3. Pull the hard disk and USB connect it... by WolphFang · · Score: 2, Informative

    Pull the hard disk and USB connect it to the target machine ... The USB thingies are like dirt cheap ...

    --
    leather-dog muksihs
    Blog: @muksihs
  4. News for... by Anonymous Coward · · Score: 0, Informative

    Slashdot:

    News for noobs and tech support for grannies.

    I cannot believe this question is even being asked here.

  5. what I do by Osgeld · · Score: 3, Informative

    2.5 inch to 3.5 inch ide adapter, plug into computer copy

  6. It's a compaq aero... hdd is ide 40 pin by Darkelf · · Score: 5, Informative

    5 seconds on Google verified this machine has no USB... tho it's age should make that obvious.

    It uses a standard 2.5" notebook hard drive, with the standard 40 pin IDE interface.

    If you don't want to pull the drive... Laplink cable is easiest.

    Pulling the drive is still a good, easy option, attach to a cheap usb interface.

    You also mentioned 16bit pcmcia... if we have a pc card NIC, access to Internet? The ftp xfer option is there too.

    --
    -Darkelf
  7. Pcmcia + compact flash by grahamsz · · Score: 4, Informative

    Put a 64MB CF card in a CF to pcmcia adapter and Windows should see it has a hard disk.

    Then stick that in a modern card reader and you should be home free