Triple M.2 NVMe RAID-0 Testing Proves Latency Reductions

Vigile writes: The gang over at PC Perspective just posted a story that looks at a set of three M.2 form factor Samsung 950 Pro NVMe PCIe SSDs in a RAID-0 array, courtesy of a new motherboard from Gigabyte that included three M.2 slots. The pure bandwidth available in this configuration is amazing, breaching 3.3 GB/s on reads and 3.0 GB/s on writes. But what is more interesting is a new testing methodology that allows for individual storage IO latency capturing, giving us a look at performance of SSDs in all configurations. What PC Perspective proved here is that users often claiming that RAIDs "feel faster" despite a lack of bandwidth result to prove it, are likely correct. Measurements now show that the latency of IO operations improves dramatically as you add drives to an array, giving a feeling of "snappiness" to a system beyond even what a single SSD can offer. PC Perspective's new testing demonstrates the triple RAID-0 array having just 1/6th of the latency of a single drive.

Comments

Re:RAID 0 is not for anything you don't want to lo

[karnal]

They did post a quick speed graph regarding raid-5 on the drives; obviously writes took an impact but reads were almost exactly the same as raid-0 x3 drives.

Questionable Results

[tempmpi]

These results seem to be very questionable. Their graphs claim that in some configurations almost all 4k read requests are handled within 100 ns. But getting even a single DRAM burst from a random DRAM location already takes almost 100ns, even through the memory controller is connected with a much tighter interface, optimized for low latency and PCIe is much slower than DRAM interface. Even without overhead 4 PCIe 3.0 lanes ( 8 GB/s) can only transfer 8 KB per s. Transfering a 4 KB Block should thus take at least 0.5 s or 500ns and that does not include any overhead nor the time needed to actually send the request to the SSD, open the page from the NAND flash, run ECC and decompression.