Slashdot Mirror
Backblaze Dishes On Drive Reliability In their 50k+ Disk Data Center
Online backup provider Backblaze runs hard drives from several manufacturers in its data center (56,224, they say, by the end of 2015), and as you'd expect, the company keeps its eye on how well they work. Yesterday they published a stats-heavy look at the performance, and especially the reliability, of all those drives, which makes fun reading, even if you're only running a drive or ten at home. One upshot: they buy a lot of Seagate drives. Why? A relevant observation from our Operations team on the Seagate drives is that they generally signal their impending failure via their SMART stats. Since we monitor several SMART stats, we are often warned of trouble before a pending failure and can take appropriate action. Drive failures from the other manufacturers appear to be less predictable via SMART stats.
Disclaimer: I work at Backblaze.
> very unlike the type of use case you will likely see
Being extremely specific - we (Backblaze) keep the drives powered up and spinning 24 hours a day, 7 days a week. So if you leave your drives powered off most of the time and boot them only sometimes, the failure rates we see may or may not be something like yours?
I'm curious if anybody has any other suggested differences with "what you will see". Most of our drive activity is light weight - we archive data for goodness sake, we write the data once then maybe read it once per month to make sure the data has not been corrupted. We stopped using RAID a while ago, so you can't say you need drives that are designed for RAID, because we don't use RAID (we do a one time Reed-Solomon encoding and send it to different machines in different parts of our datacenter and write it to disk with a SHA1 on this "shard" where that shard lives it's life independently without RAID).
ANOTHER POINT MANY PEOPLE MISS -> you can't just pick the lowest failure rate drive and then skip backups!! *EVERY* drive fails, every single solitary last drive. So you must have a backup if you care about the data, you really really do. And if you have a backup, then you are free to choose a drive that fails at a higher rate if there are other considerations such as it is a much cheaper drive. Hint: Backblaze doesn't always choose the most reliable drive, we look at the total cost of ownership including the amount of power the drive will consume and the drive's failure rate and let a spreadsheet kick out the correct drive for us to purchase this month. It is rarely the most reliable drive.